Re: New here. Need help repairing effects on Polysix.
2006-03-21 by pplasticeyess
Yep. I bought it used and it looks like it had the battery leak problem and someone fixed it up very nicely... If you know of common problems that occur after
Messages
Browse messages
Page 89 of 114 · 5658 messages matched
Is anyone selling a brand new / working KLM367A ?
2006-03-20 by gil_we
thanks
Re: [PolySix] New here. Need help repairing effects on Polysix.
2006-03-20 by jure zitnik
did you check for battery leak damage?
New here. Need help repairing effects on Polysix.
2006-03-19 by Daniel Giantomaso
Hi everyone, I just joined this forum because I have a Polysix that is about an inch away from working perfectly. I love the sound of this synth and I would
Re: [PolySix] RAM replacement ICs?
2006-02-20 by (no author)
... You can get TC5514-APL2 here: http://www.vintageplanet.nl/content.html Ciao Peter |/ (o o)
Re: [PolySix] RAM replacement ICs?
2006-02-20 by (no author)
... From: The Old Crow ( [EMAIL REMOVED] ) Date: Mar 16, 2001 Subject: Re: [sdiy] TC5514 s-ram chip needed ... Tony, Jameco has an equivalent I ve used in
RAM replacement ICs?
2006-02-20 by jure zitnik
hello. i m wondering if there are any ICs equivalent to the TC-5514 APL-3 used in the polysix. mine might be faulty and i distantly remember reading somewhere
Re: [PolySix] How do I tune this Polysix of mine?
2006-02-15 by modulatio@aol.com
Thanks so much!!! ... From: jure zitnik To: PolySix@yahoogroups.com Sent: Wed, 15 Feb 2006 16:20:10 +0100 Subject: Re: [PolySix] How do I
Re: [PolySix] How do I tune this Polysix of mine?
2006-02-15 by modulatio@aol.com
Thanks !!!! ... From: kevin hogarth To: PolySix@yahoogroups.com Sent: Wed, 15 Feb 2006 10:52:11 -0500 Subject: Re: [PolySix] How do I
Re: [PolySix] How do I tune this Polysix of mine?
2006-02-15 by kevin hogarth
Or you can download it from the Old crow site. Good luck. Supposedly you don t need an oscilloscope as it describes. A good tuner or another keyboard should
Re: [PolySix] How do I tune this Polysix of mine?
2006-02-15 by jure zitnik
it s in the service manual. it s also on oldcrow s site. try google oldcrow polysix. jure
Re: [PolySix] How do I tune this Polysix of mine?
2006-02-15 by modulatio@aol.com
It s in the manual? I ll have to check , stupid me. ... From: kevin hogarth To: PolySix@yahoogroups.com Sent: Tue, 14 Feb 2006
Re: [PolySix] How do I tune this Polysix of mine?
2006-02-14 by kevin hogarth
I m in the same boat. I tried to follow the manual but couldn t get it into tune mode . I located the Hi and lo pots and the switch for tuning mode but
How do I tune this Polysix of mine?
2006-02-14 by motionsandwaves
I recently had the battery replaced, because it needed it and it also kept resetting itself back to A1 during playback. In the process my friend with trusty
Re: Trident question
2006-02-13 by stagerhodes
I will have a guy more or less in the business, looking at my Trident, next Wednesday...i am not able to advance more on this alone..anyway many thanks to all
Polysix Wanted!
2006-02-13 by marcobasile78
Hallo everyone! I m mark from Naples (Italy) I need a polysix M (Midi with in e out, prog change, hold pedal etc) IS there anyone out there that have one for
Re: [PolySix] Modular Polysix
2006-02-11 by jure zitnik
you do realize that the POLYsix is POLYphonic? it could be done but everything patched out six times would look a bit funny... kokoon
Modular Polysix
2006-02-11 by rat soul
Hey, I saw a Roland SH 101 on ebay a while ago that had been customised so that it was semi modular like a Korg MS20. I was wondering if this would be possible
Re: Trident question
2006-02-08 by stagerhodes
I noticed the problem is independent of the mode (manual or memory), i must say i m normally in manual mode but had tried in memory too, and despite some
Re: Trident question
2006-02-08 by gil_we
When you switch the Manual mode on - do this problems still occur ? ... group, ... just ... to ... some ... is ... dissipator ... a ... wait ... distortion ...
Re: Trident question
2006-02-07 by stagerhodes
Hi , i answered your message but it seems it never came to the group, i dont know why. This week has been and it will be a very busy one for me, so i have no
Re: Trident question
2006-02-04 by gil_we
DO NOT TOUCH IC12 ! If you re not looking for any further trouble... Johannes and me were just trying to solve a problem on my Trident on which that particular
Re: Trident question
2006-02-04 by stagerhodes
Good tips which i will try for sure. I noticed the IC12 (10 leg transistor type) in the signal board , will heat very quickly, is this normal ? Since the
Re: [PolySix] Re: Trident question
2006-02-04 by Johannes Hausensteiner
Hi, So the preset thing is clear; probably a genius cranked the trimpots and made the sounds unusable. For the distortion: try to find out on what this
Re: Trident question
2006-02-04 by stagerhodes
ok...i think i made some progress here...when trying to adjust VR27 in the presets board (with piano 1 , as Johannes told) suddenly i heard the sound loud and
Re: Trident question
2006-02-03 by stagerhodes
Hi , tonight i will take a longer look to the flanger board, as well as trying some of the tips Johannes gave me (yesterday i was out and couldn t be around
Re: Trident question
2006-02-03 by gil_we
Also, can you see any broken or cold solder joint on this board ? ... related ... only ... kind ... modulation ), ... Intensity ... to ... crashed ... after
Re: Trident question
2006-02-03 by gil_we
The Flanger board (KLM-291) is also the mixer board, in case it got defective it makes sense to me that the synth problem may be related to a defect on that
Re: Trident question
2006-02-02 by gil_we
Johannes - could it be somewhere in the mixer (some bad opamp where the synth section comes in) ? ... the ... in ... in ... malfunction ... which ... wuuld ...
Re: Trident question
2006-02-02 by stagerhodes
Hi Johannes, i will try your tips and see what happens...only one thing , the distortion is more proeminent with EG Intensity to full positive position (all
Re: [PolySix] Re: Trident question
2006-02-02 by Johannes Hausensteiner
Hi Art, No,the flanger does not have any influence on the synth section, technically. So, what I get from your post is that there are (possibly) two problems:
Re: Trident question
2006-02-02 by stagerhodes
thank you !...well, the controls are working, only it makes a kind of distortion which is more audible in the 16 and 8 octaves, it reduces it in the 4 ( a
Re: [PolySix] Re: Trident question
2006-02-02 by Johannes Hausensteiner
The PCB looks OK; no damage due to leaked battery as in the Polysix is visible. According to the pics (silkscreen) the battery which is mounted seems to be
Re: Trident question
2006-02-02 by stagerhodes
Hi, just uploaded 8 photos of the board, hope they re ok now for you to try to help me. regards, Art ... and ... programmer ... ... some ...
Re: Trident question
2006-02-01 by stagerhodes
So you think the problem is programmer related ? By the way...do you think its possible to buy some press switches (not the switch itself wich is a common type
Re: Trident question
2006-02-01 by gil_we
you re welcome, I m interested to see how corroded is the board - if any at all. ... ones ... though ... just ... take ... this ... get ... definately
Re: Trident question
2006-02-01 by stagerhodes
Hi Gil, well, i m not at home right now, but the battery is from Sanyo, and the big lettering is CADNICA (nickel cadmium). I will take better pictures tonight
Re: Trident question
2006-02-01 by stagerhodes
As far as i can remember the Polysix has 1 VCO per voice, the Trident has a 2nd VCO which is very handy to get those fat detune sounds... ... net. ... them;
Re: Trident question
2006-02-01 by gil_we
It s very hard to see anything on those pictures... I do see though that the battery was already replaced ?? looks like a lithium battery what does it say on
Re: Trident question
2006-02-01 by gil_we
Tridetn MKII have an ENV for the VCF as well, and an extra sawtooth based VCO with octave selection and detuning option - great for making string sounds... BTW
Re: Trident question
2006-02-01 by stagerhodes
I think i have another problem here, not related with battery leak, i just uploaded some photos , not very good quality, but the battery seems to be sealed,
Re: Trident question
2006-01-31 by stagerhodes
hummm...the PS3200 is one of those along with the 3100 i never tried but would love to...well, lets start messing with this Trident... ... net. ... them; ...
Re: [PolySix] Re: Trident question
2006-01-31 by jure zitnik
hey what about polysix! isn t the trident s synth engine the same as polysix ?
Re: Trident question
2006-01-31 by gil_we
... the ... post ... beeing ... the ... near ... stay ... left ... to ... ... is ... section ... with ... working
Re: Trident question
2006-01-31 by gil_we
Thanks, I believe that this type of info should be shared all over the net. The Trident s schematics are very rare - took me weeks to get them; however, here
Re: Trident question
2006-01-31 by stagerhodes
Oh, i m very pleased regarding this group , many thanks for your reply and the schematics beeing available for download... i will unmount the Trident may be
Re: Trident question
2006-01-31 by gil_we
I didn t fully understand how the synth section acts on this machine... Also, is there corrosion (green colored) on the battery and near it ? Are there bad
Trident question
2006-01-31 by stagerhodes
Hi, i just bought a Trident MK I in which the poly synth section is malfunctioning, i am almost certain that the problem is the battery question , and the
Re: [PolySix] Re: fault location advice needed
2006-01-30 by jure zitnik
no not on other boards. just the 367. but that one s also cleaned now and all...
Re: fault location advice needed
2006-01-30 by gil_we
Yah I ment 367... It looks like it hasn t be 100% repaired... Can you see corrosion on other boards as well ? ... involved ... with ... probably ... alright