Re: [newmellotrongroup] Grammys
2013-02-11 by john barrick
I haven t watch any award shows in decades, Clay, but I m glad you found it good. ... -- john barrick *Leo got it right the first time* *then he added a second
Yahoo Groups archive
Messages
Page 47 of 376 · 18798 messages matched
2013-02-11 by john barrick
I haven t watch any award shows in decades, Clay, but I m glad you found it good. ... -- john barrick *Leo got it right the first time* *then he added a second
2013-02-11 by Hammonddave
I thought it sucked... 71 seconds of a tribute to Dave Brubeck? Give me a break! Sent from my iPad
2013-02-11 by lsf5275@aol.com
Everyone except for... Hellen Keller In a message dated 2/10/2013 11:33:08 P.M. Eastern Standard Time, e4103s@yahoo.com writes: If it s one thing I ve learned
2013-02-11 by lsf5275@aol.com
I thought it was the best one I d ever seen. In a message dated 2/10/2013 11:21:05 P.M. Eastern Standard Time, ecclesre inson@rogers.com writes: Well the show
2013-02-11 by Jack Younger
If it s one thing I ve learned over all these years, it s that everyone is allowed to hear what ever they want to. ________________________________ From:
2013-02-11 by ClayE
Well the show has been sucking bad the last few years but tonight it was quite good I think. I saw someone playing a digital mellotron (Markus-o-tron) during
2013-02-11 by fdoddy@aol.com
It s true though...whatever gets it done! ... From: lsf5275 To: newmellotrongroup Sent: Sun, Feb 10, 2013
2013-02-10 by john barrick
Hey! Maybe I can use that one at work! ... john barrick *Leo got it right the first time* *then he added a second pickup and got it righter*
2013-02-10 by lsf5275@aol.com
So all you newcomers to the group, this is how, after you make a pretty convincing point, you carefully CYA. Nice one! In a message dated 2/10/2013 2:41:44
2013-02-10 by tron400
Well that didn t format too well. The MC2 and MX300 are both sidechained (I think). Bernie
2013-02-10 by tron400
Just to clarify, here s my Mellotron path (and Hammond SK1 and Dotcom modular synth): Tron -- Mackie DFX-12 |-- Joe Meek MC3 |-- ... I m only considering
2013-02-10 by Jack Younger
I have this thing about using too much in the signal flow....I ve found the only reason to go through anything other than a nice direct box (we have a few
2013-02-10 by Chris Dale
Are you guys 100% sure these sounds are M300? I was under the impression the M300 didn t come out until late 1968, and this album was made early to mid 1968. I
2013-02-10 by fdoddy@aol.com
I d go with parametric, or something tunable myself. fritz ... From: tron400 To: newmellotrongroup
2013-02-10 by tron400
The ART Prochannel II and the PreSonus Channel strip both look really nice and the price is the same, but both of my Trons are going through a Joe Meek MC2
2013-02-10 by Tom Doncourt
At the end link of my syatem there are two prosonus tubepres that give a little extra punch and route things to the monitor amps and the mains. That means that
2013-02-10 by fdoddy@aol.com
Yes! A very nice unit. Here is the link to the unit I ve seen some folks using. I m going to give it a try as well...
2013-02-10 by John Hammaren
Hi Bernie, I use the ART Prochannel II. They offer a lot of value for the price. It s hard to find a tube pre in the price range of these. I have another ART
2013-02-10 by fdoddy@aol.com
Just saw this. This is the little tube pre I use at work. It s really nice! fritz ... From: Tom Doncourt To: newmellotrongroup
2013-02-10 by fdoddy@aol.com
At work I have a bunch of those Vintech NEVE knock offs and a few Summits. I don t like the Summits. I also have a ProSonus TubePre!! I use it at least fifty
2013-02-10 by fdoddy@aol.com
Sadly, I generally don t use either when going into the computer. All my processing to date has been in the box. Occasionally, I ll run it through my little
2013-02-10 by Tom Doncourt
Hi Bernie, Prosonus also makes a DI/Pre with a tube in it for a little over $100.I ve used them on the tron as well and I like it alot.
2013-02-10 by tron400
Just looked at some on eBay. A little out of my price range, but it looks like a really nice unit. Bernie
2013-02-10 by Tom Doncourt
I really like my UA 610 ...I go from that into an amp(Reeves) and use the tone controls then miked . ________________________________ From:
2013-02-10 by tron400
OK, but which or both? Brands?
2013-02-10 by Tom Doncourt
yes ________________________________ From: newmellotrongroup@yahoogroups.com [newmellotrongroup@yahoogroups.com] on behalf of tron400 [tron400@yahoo.com] Sent:
2013-02-10 by tron400
Do you use a tube preamp or EQ on your M400/MkV? I m considering one or both for my M400. Bernie
2013-02-09 by m400s851
... Hi Sean, It does have that sound, plus the attack and release is different for each chord. Seen this? http://www.youtube.com/watch?v=aZx5y5eY3tE /Mattias
2013-02-09 by Sean
... Ah, that s what that sound is. Never did figure it out, then again I m not at all familiar with the 300 sounds. You ll also hear the MkII church organ in
2013-02-08 by Mattias
Hi Chris Thanks again for taking the time. I really appreciate learning more about this stuff! ... I had to lisen to Nightwalker again and you re right, they
2013-02-07 by Chris Dale
Hi Mattias, ... Yes, it has Cello, Violin, French Horn, Flute, Male Voice, Female Voice and two special sounds that Harry kept for himself in his Riviera. He
2013-02-07 by Tom Doncourt
I like the M300 Cello...wonder if it s available anywhere, I recall liking the clarinet alot too! On Feb 7, 2013, at 10:14 AM, Bruce Daily wrote: Hi all-
2013-02-07 by Bruce Daily
Hi all- ...And Fripp never smiled again for an album cover after that. -Bruce D. #1221 ________________________________ From: Mattias
2013-02-07 by Mattias
Chris, thanks for the response and info! I read somewhere that you own the Gino/Joe Vanelli M1. Cool! What special (Gino/Joe-) sounds does it have? I thought
2013-02-04 by tron400
I met this lady on the Thereminworld website. Her name is Amethyste. She says she s a fan of Mellotrons and she s a fine Thereminist. Flute:
2013-02-04 by Chris Dale
Welcome Mattias: Thanks for sending this. It s an interesting time capsule of sorts. It certainly sounds like MK II electric guitar in there but I doubt it s
2013-02-03 by P JONES
Thanks for posting that, Gino. I remember being knocked out by the program at the time, and recorded it onto a cassette tape. Does anyone know when it was
2013-02-03 by tron400
Very interesting. Thanks Gino! Bernie
2013-02-03 by marabus
Yes
2013-02-03 by 'tronster
That was great! Thanks, Dan
2013-02-02 by gino wong
Thanks, I was concerned that I was rehashing old links, really enjoable though don t you think ? g ... -- * * *Gino Wong Birgelo* BSComm, BSEE, ReRED
2013-02-02 by marabus
Thanks Gino for the link Pete
2013-02-01 by gino wong
http://www.youtube.com/watch?feature=player_embedded&v=tg-6F_pJoU8# -- * * *Gino Wong Birgelo* BSComm, BSEE, ReRED Recording, *Analog Sound Design* *Audio
2013-02-01 by tron400
Thanks, Gary. I will take a look at Reaper, Cubase Essentials is only $99, so if prices are competitive, the feature sets would be the determining factor.
2013-01-31 by Tom Doncourt
Hi Sean, what I should say is that you want boards where ,when you look at the ends the rays run vertical, you would get this with rift sawn, to a lesser
2013-01-31 by Gary Brumm
Hey Bernie, You might want to take a look at Reaper before investing in the new Cubase. I finally took Cubase (5.5) off of my machine and have Reaper for
2013-01-31 by Sean
I imagine you d have to have an incredibly soundproof room to get away with the amplification levels needed. I also imagine the resonant peaks of the wood
2013-01-31 by Bruce Daily
Hi all- It occured to me (and maybe others) that one could glue a veneer of wood to a metal plate, re-enforcing the desired effects of both. Admittedly,
2013-01-31 by Tom Doncourt
One day Bill, I m going to get one of those plate reverbs from you. I had a long standing dream of getting an EMT like we used in the 70 s but ....this seems
2013-01-31 by william Beith
Thinking about this at greater length, the wood plate would act more like a filter than a reverberation device. I try to get the plate (metal) to deliver as