Re: Update (motm-480)
2008-03-04 by Girts R
from message #21430: Extreme abuse of the MOTM-480 CS-80 VCF: www.synthtech.com/demo/rr_480demo.mp3 There are 2 abuses of the VCF: a) the voltage-controlled
Messages
Browse messages
Page 79 of 690 · 34488 messages matched
Re: [motm] Re: Update (motm-480)
2008-03-04 by loopcycle
I would be very interested in hearing that demo. RR did show me the 480 in use, but this was long before I got my hands on one. I m also curious how he does
Re: Update
2008-03-04 by Girts R
Ah... Seems I am not the only one ... it is just everyday loneliness that happens to everyone :) never mind, I will wait again (insert delay line here)
Re: Update (motm-480)
2008-03-04 by Girts R
Thanks for sharing the MOTM480 sound clip. It seems this filter excels more in the nasty/extreme side. I remember Robert Rich has made great demo using MOTM480
Re: Update
2008-03-03 by jneilnyc
... however ... Where does this leave incomplete orders placed *before* 3/1/2006? JN
Re: [motm] Re: Update (motm-480)
2008-03-03 by loopcycle
I m still learning the 480, but it definitely changes character depending on the input signal amplitude, just as the 440 does. Because it has two outputs, one
Re: [motm] Re: Update
2008-03-03 by Stephen Drake
I can t really answer all your questions, but I can say that the 480 is certainly an extraordinary filter. I use mine all the time, and am always pleased with
Re: Update
2008-03-03 by Girts R
This state of the current backlog makes me mad. please, tell me it is still worth to wait ... Or just say something good about MOTM-480. Will it track 1V/oct
Update
2008-03-03 by Paul Schreiber
I was able to ship quite a few kits out last week, and shipping more tomorrow. I have to put MOTM aside for most of this coming week, however (real work!).
Re: [motm] stooge cable troubles
2008-03-01 by Mark
... I haven t tested them to see if it is a short or discontinuous. Although I can t see how a loose barrel could cause a short, as there is an inner plastic
Re: [motm] panel for SKB mixer case
2008-03-01 by Jason Proctor
Larry s design also incorporated an MOTM-900 PSU. i have two of these modules in my synth and they are much loved. IIRC, Stooge Moe still has the panel
panel for SKB mixer case
2008-03-01 by groovyshaman
I was wondering if anyone has done a 2U high module/front panel for a MOTM synth in a SKB mixer pop-up case that would fill the bottom 2U of space. I know
Fw: [AH]Announcing AHNE 2008
2008-02-29 by Paul Schreiber
The passing of Allen Strange
2008-02-29 by djbrow54
I haven t seen much on this. Allen Strange passed away on Wednesday February 20, 2008 in Seattle Washington. I didn t know that he worked with Donald Buchla
Mythical "MOTM kits" begin to ship
2008-02-28 by Paul Schreiber
The first set of 65 MOTM kits begin shipping 28Feb. This is not a misprint ... Paul S.
RE: [motm] stooge cable troubles
2008-02-27 by Adam Schabtach
... Nor have I, FWIW. --Adam
Re: stooge cable troubles
2008-02-27 by RRossen
Yeah, I ve had problems with the stooge cables too, intermittent and all. The Teflon tape and/or LocTite will definitely work for the loose collars but really
Re: [motm] stooge cable troubles
2008-02-27 by Dave Bradley
I ve never had any cable problems with my several dozen stooge cables. It is always important to unplug each cable by holding the plug barrel. If you pull on
Re: [motm] stooge cable troubles
2008-02-27 by Richard Brewster
I wrapped all my Stooge cable threads with Teflon tape to stop them coming loose. Works like a charm. No problems otherwise. Richard Brewster
Scope is sold
2008-02-26 by Paul Schreiber
Thanks for the interest. I may have another one, a 2465B (even higher end, with all sorts of measurements built-in) available in a month or so. Paul S.
Re: stooge cable troubles
2008-02-26 by Koos Fockens
The problem of loose collars is quite common I find. I have several Stooge cables that came from Stooge Industries, they do have a tendency to go loose. A
Re: [motm] stooge cable troubles
2008-02-26 by Ti_
One easy way to take care of the outer collar always getting loose is to use that teflon plumbers tape around the threads. I ve got a number of cables I
Re: [motm] stooge cable troubles
2008-02-26 by Scott
I had one cable where the signal was permanently shorted to ground, but Larry replaced it right away (that was one cable out of 144). Occasionally I ll find a
stooge cable troubles
2008-02-26 by Mark
Speaking of things branded Synthesis Technology , has anyone else had any problems with the patch cables Larry sold a few years back?? It seems that most of
Anyone need a *good* scope?
2008-02-26 by Paul Schreiber
I am thinking of selling one of my Tek 2465A 350Mhz, 4ch scopes. I paid $600 for it. They were about $8,700 new in the late 80s. Of course, works perfect, has
Re: [motm] Paul's Syntech brand?
2008-02-26 by Scott
Look for a TANDY label on the back, that s a sure sign it was made by Paul. ;-)
Re: [motm] Paul's Syntech brand?
2008-02-26 by Ben Stuyts
... At least you finally got your TV. (Must have been from the MOTV 0.5 era?) The rest of us are still waiting. ;-) Ben
Re: [motm] Paul's Syntech brand?
2008-02-26 by KA4HJH
... I was wondering something similar. Now that the courts have made adult toys legal in Texas, are you going to be offering a special module for
Re: [motm] Paul's Syntech brand?
2008-02-25 by eric f
Oh I built the kit. You really have to smash it down to make it fit in the 5U rack. In the end I sold it since the sound it made was too unpredictable and no
Re: [motm] Paul's Syntech brand?
2008-02-25 by groovyshaman
LMAO!! -George
Re: [motm] Paul's Syntech brand?
2008-02-25 by Dave Bradley
Paul is SYNTHTECH, not SYNTECH. Just sayin . Moe ... -- Dave Bradley
Paul's Syntech brand?
2008-02-25 by LD
I own a 17 analog color tv brand name SYNTECH (I am not making this up!), Obviously manufactured by Paul. I found it at the salvation army thrift store here
[motm] Re: Blacet/Wiard 2090 Mini Wave
2008-02-25 by Mark
... Not only that, but it s white. So it s more like the photo-negative of MOTM format :) ... I agree it s unfortunate. Not only is there MOTM format, there
[motm] Re: Blacet/Wiard 2090 Mini Wave
2008-02-25 by Jason Proctor
yes, the Modcan one includes a driver oscillator, too -- and the module is really expensive ($549). unfortunately Blacet no longer sells the basic (ie format
Re: Blacet/Wiard 2090 Mini Wave
2008-02-25 by leitner6
There s also the Modcan series-B blacet/wiard mini-wave which is already in MOTM format. The I/O is setup for lower voltage range. (+/- 5v) Personally I don t
MOTM-520 Cloud Generator additional demos
2008-02-25 by Paul Schreiber
MOTM System for sale
2008-02-24 by lfosynth2000
MOTM System for sale... Im selling a portable MOTM system. If intrested take a look att my ebay auction. The item number is: 260214516467 /Lfo Synth
Re: [motm] Re: [sdiy] Frequency Shifter FS-1A update
2008-02-24 by Andre Majorel
... Thanks. Something else : I was wondering how hard it would be to put N sets of boards behind the same panel for an N-voice frequency shifter module. The
Another chance to buy Tau Phaser boards!
2008-02-22 by JH.
Hi. Apparently my 20-pole Tau phaser project ( http://www.jhaible.heim.at/tau/jh_tau.html ) has created more demand than I had expected. The PCBs were sold
Re: For Sale MOTM,Doepfer
2008-02-22 by Carlos
The motm quad LFO is now taken.
For Sale MOTM,Doepfer
2008-02-22 by Carlos
have the following for sale. everythign is in perfect working condition and was assembled by manufacturer. I just gotta make some space for some new stuff.
Bracket CAD PDF files
2008-02-19 by Paul Schreiber
In the www.synthtech.com/tech directory, I added detailed CAD drawings for the regular BR-1 bracket (the colors are messed up, but you will get the general
Frequency Shifter PCBs update - deadline end of Feb. 2008
2008-02-18 by JH.
Hi, Made some tests with the two boards fixed on a piece of plywood, and everything connected. Apparently everything works as intended! I already have enough
MOTM rails again
2008-02-17 by Tom Adam
Where can I find a drawing of MOTM rails with some measurements on them? I m wondering about the overlapping distance panel/rail. Thanks. Cheers, ToAd
Re: [motm] RG-174/U Gauge size?
2008-02-16 by Mark
... For MOTM and module-building purposes I usually have to trim off some of the shield before I twist it up.
Any local module builders in Seattle area?
2008-02-16 by ivancu@aol.com
I ve got some module kits that still need building, looking for pro quality builders only. Thanks! Ivan
Re: [motm] RG-174/U Gauge size?
2008-02-15 by Andrew Sanchez
Hi, I found a datasheet that says the center conductor is 26 AWG. If I had to guess, I d say the braid is around 18 gauge when twisted up. Andrew
Quad Low Pass Gates Anyone?
2008-02-15 by Cynthia
Howdy! We ve received several requests lately for an MOTM format release of our popular Buchla Quad Low Pass Gates. So the answer is... YES, we ll do it! (just
Re: [motm] FS: motm-380 quad lfo -SOLD
2008-02-15 by loopcycle
Thanks for the interest, this is now sold. ... ____________________________________________________________________________________ Looking for last minute
New UTube Piece
2008-02-15 by Jim Gordon
To understand some timing problems I made this trivial piece. Some MOTM and Waldorf gear. You might find it amusing. U-Tube: