Re: panel dividing
1999-07-03 by Dave Bradley
... Larry, you dog, you beat me to it. The local campus book store has been closed for the holiday weekend, and I was going to try it today. Glad to hear it
Messages
Browse messages
Page 673 of 690 · 34488 messages matched
Re: 420 status / setting gain
1999-07-03 by Dave Bradley
Everyone, I have one of my two kits running, and wanted to share a tip. When I first cranked it up, I couldn t get nasty resonant sweeps at all. In fact, it
panel dividing
1999-07-03 by J. Larry Hendry
There has been discussion on and off about how to cause a visual division when looking at the MOTM modules. Some of us like that look because it reminds us of
Re: 420 status
1999-07-03 by JWBarlow@xxx.xxx
I wanted to finally get my review of the 420 in. I ve been preoccupied with other stuff, so it took me a few days to get it going, but I found it to be the
Site links fixed now
1999-07-03 by Paul Schreiber
The joy of case-sensitive Unix....*&#*&#$*&#$!!! Site is all better. Will add new stuff as weekend allows ( 420 gets it s own official page). I d have fixed
Allen keys
1999-07-02 by Paul Schreiber
The Allen key needed for MOTM is 1/16 or about 1.58mm Paul S.
Re: New member
1999-07-02 by Dave Bradley
Welcome to the list, Andy! Dave Bradley Principal Software Engineer Engineering Animation, Inc. daveb@eai.com
Re: controller
1999-07-02 by james holloway
Count me in too. Best, just post it to the list. Jim
New member
1999-07-02 by Andy Finch
Hi Everyone, Just thought I would introduce myself to the list. I m from Surrey in the UK. I got my first MOTM kits this week. Built the Power Supply no
Re: controller
1999-07-02 by J. Larry Hendry
... Sounds cool Doug. I hope no one minds mentioning products that can go WITH MOTM but are not in competition with any of the MOTM products. I felt fairly
Re: controller
1999-07-01 by Doug Pearson
I realize it s bad form to mention *other* manufacturers here (sorry, Paul!), but I currently have a controller on order from W!@ D that sounds incredibly cool
Re: controller
1999-07-01 by J. Larry Hendry
Tom Polk the designer assured me the controller was high on his priority list a couple of weeks ago. I have not heard from him since. I hope it is going
controller
1999-07-01 by james holloway
Larry, How is the new controller kit comming along? I still have interest in it. Jim
Re: New Patch
1999-07-01 by james holloway
Here it is, I hope you got my modules sent ok. ... _______________________________________________________________ Get Free Email and Do More On The Web. Visit
Re: New Patch
1999-07-01 by james holloway
here it is, I sent Paul a copy and the MP3 also. ... _______________________________________________________________ Get Free Email and Do More On The Web.
Re: New Patch
1999-07-01 by J. Larry Hendry
Steve, I think this is a great idea. I sometimes get requestes for information on my small contributon (the end cap) and people ask about my power supply
Good & Bad
1999-07-01 by Paul Schreiber
Good Received 250 Bourns panel pots today, 3 weeks *ahead* of schedule! Also, all of the wire is here by tomorrow (I bought tons & tons). Bad Time is such that
Re: New Patch
1999-07-01 by Steve
I have a ton of available web space for something like this. I could host a MOTM user s page if people would want that. Upload pics and .mp3 s of everyone s
Re: New Patch
1999-07-01 by J. Larry Hendry
Sure, I ll take a copy. Thanks, Larry Hendry ... just e-mail me and I ll send it to you as an attachment. Onelist won t let me make an attachment, at least I
New Patch
1999-06-30 by jimh54@hotmail.com
I have a GIF image of the patch I wrote about before. If anyone wants it just e-mail me and I ll send it to you as an attachment. Onelist won t let me make an
420 status
1999-06-29 by Paul Schreiber
I have shipped out about 1/3 of them. Tomorrow is non-MOTM day. Thursday another 1/3 will ship, but the rest will have to wait until next Tuesday due to the
420's
1999-06-28 by jimh54@xxxxxxx.xxx
Received 2 MOTM 420 s on Saturday. Got them built up and on line by Sunday. What we have here folks is a complete basic Synth. These filters are too cool!! If
Site Maintanence
1999-06-27 by Paul Schreiber
The home page at www.synthtech.com will be down for maintanence. Please use email, fax (817-498-3792) or phone from 4PM-11PM. Paul S.
Ribbon disaster
1999-06-26 by Dave Bradley
I m bummed. I finally get the info together to document how to attach power to my Moog 1150 ribbon controller. Start to reassemble it after meticulously
MOTM-19A rails
1999-06-26 by Paul Schreiber
I am out: MOTM-420s shipped today did not include these. I am due more on Tuesday. Paul S.
Re: MOTM-420's *Officially have shipped*
1999-06-25 by J. Larry Hendry
Would that be the non-coax kits including mine? I have been so busy at work that getting to my office has not been a priority. However, if I knew that I
MOTM-420's *Officially have shipped*
1999-06-25 by Paul Schreiber
Beleive it or not, I actually shipped 10 kits out today. Whew!! Rest will start shipping next Tuesday. Paul S.
Re: 1U multi
1999-06-24 by JWBarlow@xxx.xxx
Just a thought: maybe just making a punched 1U panel available which each user could configure to his/her own desires (be it a particular adapters or
Non-wire kits ship tomorrow/1U multi
1999-06-24 by Paul Schreiber
Due to TI sucking 85% of yesterday and today s BW, non-coax kits will have to ship tomorrow. Full kits will start shipping Tuesday. Paul S. BTW: 1U multi is
Re: Tiny little module suggestion
1999-06-24 by John Speth
Me too. I would value a quartet patch module more than the M940. I envision it 1U wide and, I think, it would hold 4 quartets. Real cheap too. How about it?
Re: Cable News Network
1999-06-24 by Dave Bradley
If it s not too late, hold my order until next week, since I can t get delivery at work over the weekend anyway! Dave Bradley Principal Software Engineer
MOTM modules
1999-06-24 by jimh54@hotmail.com
Steve, I still have not received the modules I bought from you. When, and what carrier did you send them? I m sorry I have to send this through the list but I
Tiny little module suggestion
1999-06-24 by Christopher Jeris
Maybe this is too tiny even to merit the name module . I find that on my 940 patch panel I use the 1/4 quartets much more heavily than the type-changer sets
Fw: [AH] filterbanks and ringmods
1999-06-23 by Paul Schreiber
I would be grateful if some of you mention the MOTM to him. Paul S. ... From: Chris Meyer To: analogue@hyperreal.org
Cable News Network
1999-06-23 by Paul Schreiber
The latest from CNN: The original cable supplier (you know, the one that kissed me off as small potatoes ) has had a change of heart. Meaning, he needs $$$.
Re: Minimoog aux socket pinout?
1999-06-22 by Dave Bradley
... I checked this out last night. Resistance of the metallic foil laminated to the ribbon is very low, about 2 ohms. Resistance of the embedded wirewound
Re: ID this IC?
1999-06-22 by Dave Bradley
Thanks guys, found it on icmaster.com. Dave
Re: between the lines...
1999-06-22 by David Bivins
Hi Paul, list, Whoops! While satisfying my appetite for module specifications I must have missed the gap spec. I have every desire to use these as designed
Re: ID this IC?
1999-06-22 by Paul Schreiber
AHA! Hugo is correct. This is an upgrade to a LM3046! Pin-fo-pin. It is mentioned deep within early Electronotes (around #20 or so) Paul S. ... From: Hugo
Re: ID this IC?
1999-06-22 by Hugo Haesaert
Hi All ! From an 1982 ic master :) : SG3821 Silicon General differential pair and three npn transistors no other info, this heading lists a slew of other ic s,
Re: between the lines...
1999-06-22 by J. Larry Hendry
... many ... meet ... was ... look? David, Some of us have discussed the aluminum between teh modules for that Moog look, but have yet to find anything exactly
Re: Minimoog aux socket pinout?
1999-06-22 by JWBarlow@xxx.xxx
Hi Dave, Thanks for answering the questions. I hope you can figure out the IC. I found an OB-1 a couple of years ago with a bad power transistor but couldn t
Re: between the lines...
1999-06-22 by Paul Schreiber
1) First, the cracks between the panels are there *on purpose*. The reason is if you don t do that, the dirt/dust/cat hair all gets sucked in through the jack
Re: Latest date?
1999-06-22 by Paul Schreiber
Most likely I ll start shipping Mon. of next week. This week is TI week. Paul S. ... From: Dave Bradley To: MOTM List Date:
Re: between the lines...
1999-06-21 by David Bivins
... Exactly. Especially considering that the modules have the aesthetically pleasing tendency to have all the knobs and jacks line up! If there s nothing
Re: Latest date?
1999-06-21 by Andrew Schrock
Speaking of which: If you need coax, I stumbled opon some shielded stranded belden cable Sunday which will do fine. I ll let it go super-cheap for MOTM people
Latest date?
1999-06-21 by Dave Bradley
Paul, For those of us signed up for coaxless filter kits, what s the latest info on ship date? Rocket Moe
Re: between the lines...
1999-06-21 by Dave Bradley
I certainly qualify for a post many times daily type, so I ll answer. I m looking for a solution, but don t have one yet. Larry mentioned milling down HO
between the lines...
1999-06-21 by David Bivins
I guess I caught a bit of this discussion among a couple of you post many times daily types, but is anyone putting anything *between* the modules and/or on
Re: More Moog ribbon controller (long)
1999-06-21 by J. Larry Hendry
I thought YOU would enjoy this Dave. LH :) ... uses ... text,