RE: Cabinet ideas sought!
1999-09-13 by Dave Bradley
... Paul will tell you that distributing audio signals on a buss is asking for noise and crosstalk. Control voltage signals would be less sensitive - you might
Messages
Browse messages
Page 661 of 690 · 34488 messages matched
Re: MOTM Pre-amp
1999-09-13 by thudson@cygnus.com
... Yes, except I ve found a swell mod to the Foxx that Prescription Electronics designed in to one of their devices. I plan on playing with that at some
Tolex
1999-09-13 by Tkacs, Ken
Does *everyone* dislike Tolex...? Personally, I *love* wood-if I make something out of wood, I never paint it. Always let the true beauty of a material, be it
Re: I"m back
1999-09-13 by thudson@cygnus.com
... Well, I ve gone as far as purchasing wood. I bought paduak. It is a deep burgundy wood w/ nice grain. But I m still trying to determine just what
RE: A Radio Shack Anecdote
1999-09-13 by joe.pavone
Just about the same thing happened to me. Of course in the RS near me when I asked for heat sink compound they did at least try to help by bringing me a heat
A Radio Shack Anecdote
1999-09-13 by Tkacs, Ken
When I ordered an MOTM-300 VCO kit last week (which just arrived moments ago, Paul-Thanks!), I was advised to have some heat sink compound handy for assembly.
Zvex Fuzz Factory
1999-09-13 by joe.pavone
I have to chime in and agree with Rob here. I recently aquired one of these and it is amazing. I cracked mine open so you all can see what s inside... check
Re: Re: MOTM Pre-amp
1999-09-13 by Paul Schreiber
Yep. Paul S. hard-headed German ... From: J. Larry Hendry To: motm@onelist.com Date: Sunday, September 12, 1999 9:59 PM
Re: Re: Re: MOTM Pre-amp
1999-09-13 by Paul Schreiber
10 days, max. Average of 5 days. Paul S. ... From: RSchwim295@aol.com To: motm@onelist.com Date: Sunday, September 12,
Re: Re: MOTM Pre-amp
1999-09-13 by J. Larry Hendry
So, does this mean we are back to 3 input pre with one guitar input and two line levels? LH From: Paul Schreiber ... works. ... get
Re: Re: Re: MOTM Pre-amp
1999-09-13 by RSchwim295@xxx.xxx
Hello--How long would you need them for? Rob
Re: Re: MOTM Pre-amp
1999-09-13 by Paul Schreiber
I am gathering opinions/schematics on the MOTM-480 Effects Farm (catchy title, huh!) I can t spend $1500 buying all this stuff. So, if anybody *has* an effect
Re: Re: MOTM Pre-amp
1999-09-13 by RSchwim295@xxx.xxx
Hello-- I ve gotten no response to my post regarding the Z. Vex Fuzz Factory which is probably the best fuzz I ve had the pleasure of messing with. Please,
Re: Cabinet ideas sought!
1999-09-13 by JWBarlow@xxx.xxx
My real concern is attaching the rails to the sides of the cabinet (I m leaning towards just bolting the rails together and using large L brackets bolted
Re: MOTM Pre-amp
1999-09-13 by JWBarlow@xxx.xxx
... I played with my Serge Wave Multipliers and Waveshapers today. One of the Multipliers will add odd harmonics to a sine wave while another adds even
Re: I"m back
1999-09-13 by J. Larry Hendry
Oh goodie. Maybe some valuable replacement parts..... Hey... No other responses from John s cabinet post. Oh! I bet some of you guys are doing this MOTM
I"m back
1999-09-12 by Paul Schreiber
Just a note: I m back in town after rooting around in Doug Curtis storage shed. Watch AH/DIY for some news! (CEM related) Paul S.
Re: MOTM Pre-amp
1999-09-12 by Hugo Haesaert
Hi Thomas n All ! The idea of a sort of morphing between a rectified sine and square, is originally a Buchla idea . The Wiard synth had a module based on this
RE: whoops, another DoMOAS thing
1999-09-12 by Tentochi
Finally, someone brought up what is truly important at the moment. And several others have alluded to it. HARDWARE. The software can be modified down the
Re: Cabinet ideas sought!
1999-09-12 by J. Larry Hendry
... MOTM ... build, ... built ... as ... Well, I have not built yet, BUT, I have been thinking about it quite a bit. Since you have the rack rails, that is a
Cabinet ideas sought!
1999-09-11 by JWBarlow@xxx.xxx
I recently got two pair of 21U rack rails as I plan to move my growing MOTM in to a Moog 35 style cabinet. I m not sure whether I ll go fine wood or
Re: DoMOAS live performance features
1999-09-11 by Andy Hartley
Hear Hear or is it Here Here. I was also a bit disappointed to hear MOAS was to be cut down in its prime. I was hoping for at least a Regel Werk or is it
Re: Re: doMOAS
1999-09-11 by Gur Milstein
yes it is possible i saw it in the old Elector quantizer, it worked pretty well. Gur Milstein
RE: DoMOAS
1999-09-10 by Dave Bradley
Yes, it would have to have an ADC to read the panel pots for storage in patterns. Also a DAC for quantizing. Dave Bradley Principal Software Engineer
RE: whoops, another DoMOAS thing
1999-09-10 by David Bivins
This sounds good, and your previous e-mail s points are well taken!
whoops, another DoMOAS thing
1999-09-10 by David Bivins
I d also like to throw in my vote for a manual step button. I don t want to have to run the sequence slowly to alter voltages! David Bivins Creative Strategist
RE: DoMOAS live performance features
1999-09-10 by David Bivins
I was very disappointed to hear that MOAS may never be implemented. Therefore, for what it s worth, I want as many features as possible. I don t want to have
RE: DoMOAS: KISS vs Gimme more!
1999-09-10 by Dave Bradley
May be possible. The display Paul is talking about is only 21 characters by 2 lines. Dave Bradley Principal Software Engineer Engineering Animation, Inc.
Re: DoMOAS: KISS vs Gimme more!
1999-09-10 by Cary Roberts
Why not have four soft buttons under the display? The buttons could be user definable and the display would list their function ala Ensoniq ESQ, Akai S3000,
RE: whoops, another DoMOAS thing
1999-09-10 by Christopher Jeris
... Maybe it depends on how willing each of us is to write our own firmware? The functionality provided actually matters less to me than the fact that the
RE: whoops, another DoMOAS thing
1999-09-10 by Dave Bradley
Me, I like a pushbutton for each stage that sets it active. Then you can remove the clock and manually set each stage for tuning, or run the clock and play
DoMOAS: KISS vs Gimme more!
1999-09-10 by Dave Bradley
Paul s original idea of a modular sequencer may serve us well here. We have the keep it simple to use folks and the I want to do sophisticated stuff folks.
Re: MOTM Pre-amp
1999-09-10 by Mark Pulver
... When Ric Miller was building systems as ARF (Aural Research Facilities) he offered this circuit as a module. I have two of them. They re pretty dang
Re: MOTM Pre-amp
1999-09-10 by thudson@xxxxxx.xxx
... Thanks ... Actually, after I wrote this I remembered there was an Electronotes article about a wave shaper that would give a smooth transition (vc of
RE: DoMOAS live performance features
1999-09-10 by james holloway
Ditto!! K.I.S.S. why make it too complex. I got a modular system because I didn t like the programming of digital systems.
RE: DoMOAS live performance features
1999-09-10 by JWBarlow@xxx.xxx
If Paul follows all my past (dare I say brilliant) suggestions and utilizes some form of Thomas s personality concepts, then this WILL BE MOAS regardless of
Re: MOTM Pre-amp
1999-09-10 by JWBarlow@xxx.xxx
Hi Thomas, I really like your ideas (below) and agree that it could make a really good MOTM module. Maybe a dual sound fuzz (meaning A/B) which could have
Re: doMOAS
1999-09-10 by Jeff McLaughlin
... How about non-western scales, either user-defined or preset? Analogamelan! Forgive my ignorance, but is this technically possible?
RE: DoMOAS live performance features
1999-09-09 by David Bivins
... Ditto!
RE: DoMOAS live performance features
1999-09-09 by David Bivins
... Well, as long as my boss doesn t mind getting this new client proposal a little late ;) ... But I want it! :) I know it s not the MOAS, but I really don t
RE: DoMOAS live performance features
1999-09-09 by Mark Pulver
... It s one of many classic applications for a 2 row x N sequencer... Multi-Row sequencers can also be used for setting up moving chord patterns. ... I
DoMOAS
1999-09-09 by Thomas Hudson
I may have missed this, but will DoMOAS have an ADC? It would be nice for things like: - Voltage controlled stage select. - Quauntitizing external voltages. -
RE: DoMOAS live performance features
1999-09-09 by John Speth
On Thursday, September 09, 1999 2:56 PM, Mark Pulver ... Isn t Variable stage timing just the classic application of a 2 row x N step sequencer? Row 2 CV
RE: DoMOAS live performance features
1999-09-09 by Mark Pulver
I ve only been skimming the messages here, so I apologize for any cross-over. ... Did anyone mention variable GATE_ON time per stage? ie, the stage will take
EG Mod
1999-09-09 by Tkacs, Ken
The post of a one-wire modification to the MOTM-800 looked interesting. I searched the archives though and gave up-that search engine is far too primitive to
RE: DoMOAS live performance features
1999-09-09 by Andrew Schrock
... I think both modes of mounting the PCB could, with a little forethought, work fine. Many successful sequencers are rackmounted (MAQ-16, etc). ... I would
RE: DoMOAS live performance features
1999-09-09 by Dave Bradley
... in ... is ... is ... closed... Seems like if you are using a whole row of pots up for gates, as in your trigger sequencer scenario, then a rest is just a
RE: DoMOAS live performance features
1999-09-09 by Dave Bradley
Absolutely! That s what I meant. First and foremost, it s a MOTM module. I was only trying to point out a potentially lucrative secondary market. Thinking
RE: DoMOAS live performance features
1999-09-09 by james holloway
Please!! Not a stand alone. Retrofit it in a box if you must but let me rack mount mine.
RE: DoMOAS live performance features
1999-09-09 by Dave Bradley
A couple more features for the wish list: Glide knob, turned on and off from an input jack. Octave +/- transpose Dave Bradley Principal Software Engineer