MOTM

On Thu, 9 Sep 1999, Dave Bradley wrote:
> From: "Dave Bradley" <daveb@...>
> Absolutely! That's what I meant. First and foremost, it's a MOTM module. I
> was only trying to point out a potentially lucrative secondary market.

I think both modes of mounting the PCB could, with a little forethought,
work fine. Many successful sequencers are rackmounted (MAQ-16, etc). 

> Thinking about a tabletop box might cause the form factor to be a little
> different behind the panel - for instance, mounting the circuit board
> parallel to the panel for a shallower depth, rather than at right angles as
> is normal with narrow panels.

I would think Paul would do this anyways... it's not very practical to
have to use flying wires to hook up individual pots when there are so many
of them. 

Andrew

-| Andrew Schrock | aschrock@... |-