RE: [Fwd: Fwd: [Fwd: Fwd: AOL & MICROSOFT]]
1999-10-16 by David Bivins
Please, please, please don t send garbage like this to the list. I understand that you do not know that what you forwarded is a well-publicized hoax or prank
Messages
Browse messages
Page 653 of 690 · 34488 messages matched
Re: [Fwd: Fwd: [Fwd: Fwd: AOL & MICROSOFT]]
1999-10-16 by Paul R Bower
Subject: [motm] [Fwd: Fwd: [Fwd: Fwd: AOL & MICROSOFT]] so Paul S is going to be very busy over the coming months what with all this free cash floating around
[Fwd: Fwd: [Fwd: Fwd: AOL & MICROSOFT]]
1999-10-16 by thebass
From: Bruce Forat Subject: [Fwd: Fwd: AOL & MICROSOFT]Date: Fri, 15 Oct 1999 01:19:02 -0400 From: JSPEEDYJ@aol.comTo:
[Fwd: Fwd: [Fwd: Fwd: AOL & MICROSOFT]]
1999-10-16 by thebass
From: Bruce Forat Subject: [Fwd: Fwd: AOL & MICROSOFT]Date: Fri, 15 Oct 1999 01:19:02 -0400 From: JSPEEDYJ@aol.comTo:
OT: Server hell
1999-10-15 by J. Larry Hendry
My ISP s server crashed, and I fear much mail over the last two days is lost. This is a test. Sorry. Stooge Larry Why those knuckle heads. I ought to....
RE: Module status/update MOTM uVCO
1999-10-15 by Dave Bradley
... 6) Triple preamp/uVCO/Env follower I would love to get these out this year. But if I m lucky, I can get 1. Probably the preamp just because it s the easier
RE: Module status/update MOTM uVCO
1999-10-15 by william Hanson
I love it ! When will these puppies be out ? =====
R68 and 410
1999-10-14 by John Speth
It s a shame the R68 of the 410 wasn t designed jumper selectable! Maybe on rev B. In the meantime, I d sure like the option of rapidly switching in/out R68.
RE: Module status/update
1999-10-14 by Dave Bradley
The final design mentioned had a TRI out and a VARiable out going from square to saw. Projected price $159.00, attached is the proposed panel image. Dave
Re: MOTM-300 VCO Test
1999-10-14 by Paul Schreiber
They are 300 degree pots! Good eyeballs! Paul S.
RE: MOTM-300 VCO Test
1999-10-14 by Tkacs, Ken
I figured that the PW limits _were_ part of the design. My dear old MS-10 s Pulse Width control, for example, seems to go to DC at about 2 and 8 which
Re: MOTM-300 VCO Test
1999-10-14 by Paul Schreiber
Note that the WIDTH control is like that *on purpose* as I didn t want anybody thinking it was broken when the pulse goes away (to DC, actually). I think the
MOTM-300 VCO Test
1999-10-14 by Tkacs, Ken
Paul, I finally got twenty minutes to myself last night to fire up the VCO I built a month ago. This was just a bench-test-by ear-I didn t calibrate it or use
Re: Module status/update
1999-10-14 by JWBarlow@xxx.xxx
I haven t seen a reply to this yet. We were talking about this maybe a month ago. It is simply a 1U VCO (hence micro) with basic features like 1V/OCT and LIN
Re: Module status/update
1999-10-13 by Zsolt Homlokos
... whats a uVCO ? never heard of it. thanks Zsolt
RE: wires, wires, wires....hhhmmm
1999-10-13 by David Bivins
http://www.wackykovacy.com/ is the address. He s good. And he will custom-make them using your choice of color for the cable and color for the heatshrink, so
Re: wires, wires, wires....hhhmmm
1999-10-13 by J. Larry Hendry
Aaron, Few would argue that the Neutrik connectors are about as good as it gets for a ~ $2 connector. However, one might argue that since we are all
Re: wires, wires, wires....hhhmmm
1999-10-13 by Paul Schreiber
The concensus is this guy called Wacky Kovaky (for real!) that makes them up for $5ea using Switchcraft plugs. I personally like Mogami cable, Paul S. ...
wires, wires, wires....hhhmmm
1999-10-13 by aaron@xxxxxxxx.xxx
Ok, Being new, and having NOT gone thru ALL the archives, and alergic to cats.... What are the opinions on patch cables? Good lengths? Good brands - audio -
Re: Need specs for washers!
1999-10-13 by JWBarlow@xxx.xxx
... Goofy, yuck! Are you sure it s goofy? Not zany? Not wacky? I guess nutty would be a little too ... er, uh goofy, so even if they re nutty that would be
Re: Mixers....again.
1999-10-13 by J. Larry Hendry
... activated ... turning ... KNOB ... out ... Oh yeah !!! I could go for that. Now don t forget Shemp... ... better ... Sob, couldn t get to the P.O. box
RE: Mixers....again.
1999-10-13 by JWBarlow@xxx.xxx
My idea is that when a plug is NOT inserted into the jack, a uP is activated which looks at the voltage on the wiper of the sub pot. If that voltage changes
Re: Mixers....again.
1999-10-12 by J. Larry Hendry
... made ... I bow humbly in your presence oh greatest of the Stooges. Please promise not to knuckle-head me too bad. Lowly Stooge Larry
Re: Quick 410 question
1999-10-12 by Paul Schreiber
I suggest putting it in, then deciding later if the levels are too low. It s easier to cut it out than soldering it in from the top. The reason is that there
Re: Quick 410 followup
1999-10-12 by hodad1@xxxxxxxxxx.xxx
If it s an issue of levels-- What about synths that have Lo Audio & Hi Audio outs? Hi Audio will drive headphones easily enough: is that likely to be a hot
RE: Quick 410 question
1999-10-12 by Dave Bradley
Eventually, when Paul ships the preamp, you could just set it up for the 300 level signals, and run external audio through the preamp (although that doesn t
Quick 410 question
1999-10-12 by hodad1@xxxxxxxxxx.xxx
Paul-- Just got my kit in & was glancing at the instructions. I noticed the thing about R68 being optional, depending on how you use the module. Well, what
Module status/update
1999-10-12 by Paul Schreiber
1) MOTM-800 Rev B The Rev B adds the circuitry to get full ADSR action with GATE only. The older Rev A pcbs are all gone. These will ship starting next Monday.
Re: Stuff to the right... (fwd)
1999-10-12 by Mark Pulver
... Yeah, but what s that keyboard thing sitting to the right of the MOTM case? Not that red Nord Lead thing, the other one... I can t quite make it out... ...
Stuff to the right... (fwd)
1999-10-12 by Dave Fulton
I ment to send this to the list. JB? That stuff below the TC to Event Box, MW2, MW2xt (The orange thing!) and the Eventide 949is a custom panel with some Serge
RE: Mixers....again.
1999-10-12 by Dave Bradley
... You will recall, my dear boy, that when this subject came up before, I made the absolutely brilliant suggestion that the knob for the submix pot be
MOTM-300 questions/problems...
1999-10-12 by Tkacs, Ken
Thanks for asking! I am really embarrassed to admit this, but... I haven t tried it yet! I built the power supply and VCO weeks ago and I still haven t fired
RE: EIA...got the ^@&@!! spec
1999-10-12 by Tkacs, Ken
That s pretty interesting-I never thought of that as an issue, but I guess that really could be a problem. (Might even screw up a NASA space probe launch,
Re: Re: the joy of rackmount
1999-10-12 by Paul R Bower
... nevermind - i had to check (but getting the human league in the studio next door up for it is a kosher one - yes..?) as for elliott & rosencat, they re far
Re: Re: the joy of rackmount
1999-10-12 by J. Larry Hendry
... joint. ... Hummm... Typical musician. LH
Re: Re: the joy of rackmount
1999-10-12 by Seth Redmore
... Yeah, my cat has to use two or three papers when he puts together a joint. Really harsh on the lungs -- it s like I m smoking solder. :) --Seth
Re: Need specs for washers!
1999-10-12 by J. Larry Hendry
... means ... bit ... I will mention that I did find some others before that were 0.875 OD. I bought 4 or 5 to try. They looked totally goofy in my opinion.
Re: Need specs for washers!
1999-10-12 by JWBarlow@xxx.xxx
... I would think that a larger OD would be in order since this is the sole means of identifying which jacks are connected. I was thinking 0.75 or even a bit
Re: Need specs for washers!
1999-10-12 by Paul Schreiber
The Switchcraft jack washers are 0.618 OD x 0.375 ID x 0.021 thick Paul S.
Re: Need specs for washers!
1999-10-12 by J. Larry Hendry
The ones I found that fit the Switchcraft jack very well are as follows: ID = 3/8 , OD = 5/8 (OD not critical and can vary with taste) Thickness can vary,
Re: Daves MOTM page
1999-10-12 by JWBarlow@xxx.xxx
Dave, That case looks great! A real inspiration as I (continue to) ponder my cabinet needs. Hey, what s all that other stuff in your studio -- to the right? Is
Need specs for washers!
1999-10-12 by Mark T
I may have found a source for the colored washers. Can anyone provide me with exact dimensions, and what type of material should be used? This outfit may have
Re: Re: the joy of rackmount
1999-10-12 by J. Larry Hendry
... Hey, if he gets by with the cat, then I must insist that my wife counts. After all, at least she can solder. So far, I have not been able to get my cat to
Re: Mixers....again.
1999-10-12 by J. Larry Hendry
... pots. ... currently ... jack ... Oh come on Dave. You can do better than that. I say that the switch in the 1/4 jack that drives the 7 analog switches
Re: Get 50% off your next module!
1999-10-12 by J. Larry Hendry
I knew somebody had to be Paul s favorite. Now we all know who it is. Rapid winking, Larry ... so ... MIDI- CV,
Re: Re: the joy of rackmount
1999-10-11 by velure
... my cat, curtis, wishes to buy several modules. since he has trouble typing, i am sending you this email. curtis wishes to buy a 420, a 410, and an LFO.
Re: Re: the joy of rackmount
1999-10-11 by Paul Schreiber
Let s see, you signed up yourself? :) How about your cat? Paul S. ... From: Paul R Bower To: motm@onelist.com
Re: the joy of rackmount
1999-10-11 by Paul R Bower
... (I emailed Doepfer a while ago to ask them how wide was a Eurorack ... yep, it s the same standard originally designed for military / telecommunications -
RE: Get 50% off your next module!
1999-10-11 by David Bivins
What? I thought you said you were paying me by the *hour,* not for the honor! Damn! Fantasy blown, no money.... ;)
RE: Mixers....again.
1999-10-11 by Dave Bradley
Ya want a panel mockup? I need: layout and labels module name Inartistic Igor