Demographics
1999-10-27 by Fred Becker
Age: 43 Location: Silicon Valley, USA Modules: None yet Other Instruments: Arp 2600, Korg PS-3100, Synergy II+ and more Styles: Ambient, space, art music,
Messages
Browse messages
Page 649 of 690 · 34488 messages matched
Re: Demographics
1999-10-27 by Seth Redmore
Unlike the rest of you, I m not named Dave. :) Age: 28 Where: Silicon Valley Modules: one of each Other instruments: K2500, Waldorf Q, Nord Lead, Sherman
Re: Sloped rails
1999-10-27 by JWBarlow@xxx.xxx
... First, let me make this clear -- I m wondering how to attach the center rails (of a two row cabinet) to the sides of the cabinet. Again L brackets is all
Re: Backwards time travel on MOTM webpage
1999-10-27 by JWBarlow@xxx.xxx
... I hope Celeste will post to the list (and keep us in line, this place is starting to smell like a high school boys locker room). It seems like every Moe,
Re: Re: thoughts from a newbie / rapidly becoming old lag
1999-10-26 by J. Larry Hendry
... I have never heard of Bagpuss. However, I am not much of a TV guy, so maybe I have just missed out. Larry Hendry
Re: Re: thoughts from a newbie / rapidly becoming old lag
1999-10-26 by Paul R Bower
hello, well, after finally getting to build the thing on Friday night, i realised the colour coding of CV / audio / gates on the MOTM would be a waste of time
Re: Re: demographics and other nonsense...
1999-10-26 by Paul R Bower
what a nightmare (just found 97 emails in my inbox) - that last communication has been sat in my outbox for the past 4/5 days, and after a bit a of dial-up
RE: More cabinet stuff - was: Sloped rails
1999-10-26 by Dave Bradley
... You are correct sir. Sides full width, tops thin, bottoms thin except for bottom cab. Dave Bradley Principal Software Engineer Engineering Animation, Inc.
RE: More cabinet stuff - was: Sloped rails
1999-10-26 by Dave Bradley
... Standard 2U MOTM panels, mounted sideways. So the cab has 3 rows: 1 bottom row 2U high, with custom stuff, middle and top row 5U each high with standard
Re: Re: thoughts from a newbie
1999-10-26 by J. Larry Hendry
... Welcome to the wonderful world of MOTM Paul. ... From a guy that does mains work for a living, I say good idea. Maybe the inside of the shield should be
Re: Demographics
1999-10-26 by Dave Trenkel
Just another of the 7 Daves (Am I Sleepy, Dopey or Grumpy (usually all at once), And where s Snow White? ). Age: 37 Location: Corvallis, Oregon, USA Modules:
More cabinet stuff - was: Sloped rails
1999-10-26 by J. Larry Hendry
... inset ... the ... I never really noticed this until you pointed it our Dave. Now that I look, I am seeing that on the sloped cabinets (it appears to me)
Re: woodworking, was Sloped rails
1999-10-26 by Mark Pulver
... Lemme fan the flames... This is what Kevin refers to as The Truth Zone: http://www.dennishoulihan.com And something similar involving Gibson (no bearing on
Re: woodworking, was Sloped rails
1999-10-26 by J. Larry Hendry
Dave, please do post the photos. I have some I got from Kevin s site, I was going to post to the list to illustrate details of this discussion, but I was
RE: woodworking, was Sloped rails
1999-10-26 by CHRIS PARKER
Try: http://machines.hyperreal.org/manufacturers/Moog/Modular/ CRP ... From: Tkacs, Ken One of the sites (Synthfool? Analog Heaven? I
RE: woodworking, was Sloped rails
1999-10-26 by Mark Pulver
... Kevin s got some: http://www.synthfool.com/pics.html#moog http://www.synthfool.com/broc.html Music Machines has more:
RE: Sloped rails
1999-10-26 by Cary Roberts
... Even if you can find 12 walnut, I d suggest ripping it down to 4 widths, and flipping every other piece and regluing. That will prevent warping. If
RE: woodworking, was Sloped rails
1999-10-26 by Tkacs, Ken
One of the sites (Synthfool? Analog Heaven? I can t remember) has a series of detailed photos of the front, back, and insides of a 55 cabinet that might help
RE: woodworking, was Sloped rails
1999-10-26 by Dave Bradley
Yep, I ll drive back to Missouri to use my dad s fantastic wood shop when the time comes. He has all the planers, joiners and saws, etc. etc. that I need. He
MOTM wives - was: Backwards....
1999-10-26 by J. Larry Hendry
... wife ... Steve (# ? of 3), You can print this and hand it to your wife, but that s as close as I will come to telling her. My wife likes MOTM (qualifies
MOTM names was backwards......
1999-10-26 by J. Larry Hendry
... AND four (of the three) Stooges. And yes, he gets them messed up too. I got a nice package (thanks Paul) addressed to Larry Moe Hendry. I appreciate
RE: Sloped rails
1999-10-26 by CHRIS PARKER
Are you going to do the wood work yourself, Dave? If so, where did you find 12 wide 3/4 walnut and how much did it cost you? I still have hopes of getting
RE: Sloped rails
1999-10-26 by Dave Bradley
OK, here s what I m thinking currently. Look at an old Moog 55 cabinet. It is 3/4 thick, but the modules are inset into the front edge such that it only
Re: Backwards time travel on MOTM webpage
1999-10-26 by velure
... Glad to see that not only men (boys) are doing the Modular thing. My wife has boldly stated that only men seem to dig synths and things. If you want to
Re: Backwards time travel on MOTM webpage
1999-10-26 by Paul Schreiber
That s the *other* Ken, Ken. MOTM customers include: 7 Daves 5 Johns 3 Kens 3 Scotts 3 Steves 1 Celeste
RE: Backwards time travel on MOTM webpage
1999-10-26 by Tkacs, Ken
Okay, I ll change my name to Bruce. ... From: Paul Schreiber [mailto:synth1@airmail.net] That s the *other* Ken, Ken. MOTM customers include: 7 Daves 5 Johns 3
RE: Demographics
1999-10-26 by Tkacs, Ken
Dave, if you re interested, the epic poem Aniara was based on was just translated into English this past February (see Amazon). It helps shed some light on the
RE: Backwards time travel on MOTM webpage
1999-10-26 by Tkacs, Ken
Yes, please! I ve fallen and I can t get up! :-) Just kidding-I am very anxious, of course, but they say that delay of gratification is the hallmark of
RE: Having another one of my spells
1999-10-26 by Tkacs, Ken
Did I say FAQ ? Oops. I meant the *catalog,* right under it. Check the page for the VCO, the third line on the page (part of the headline): NOTE: This kit
RE: Carriers, Modulators, Sawtooths, & Ramps
1999-10-26 by Tkacs, Ken
No, you re right-it is an arbitrary distinction. But there was a movement to MAKE a distinction that apparently didn t leave the East Coast. ... without
Re: Demographics
1999-10-26 by J. Larry Hendry
Since Ken started this: Name: Larry Hendry Age: 43 Locale: Indiana, USA MOTM Modules: One or more of each (except the 900/940) Styles: old (70s) progressive
Re: Sloped rails
1999-10-26 by J. Larry Hendry
... row ... Well, I certainly thought that direction too. However, I have wondered recently if it was not excessive. However, maybe excessive describes
Re: Demographics
1999-10-26 by DAVEVOSH@xxx.xxx
In a message dated 99-10-25 15:48:31 EDT, you write: ken, the barrons album is
Re: Re: Bill's Babble & Ken's ranting I agree!
1999-10-26 by DAVEVOSH@xxx.xxx
In a message dated 99-10-25 15:12:27 EDT, you write: steve, md? where? i`m in upper marlboro...... best, dave
Re: Re: Bill's Babble & Ken's ranting I agree!
1999-10-26 by DAVEVOSH@xxx.xxx
In a message dated 99-10-25 14:44:04 EDT, you write: i used to have a pair of
Re: Backwards time travel on MOTM webpage
1999-10-26 by Paul Schreiber
OK OK I ll go fix it (I *really* need to ship Ken his kits so he can solder) Paul S. ... From: Elhardt@aol.com To: motm@onelist.com
HSC
1999-10-26 by Paul Schreiber
I need to add that to the FAQ. Paul S. ... From: Elhardt@aol.com To: motm@onelist.com Date: Monday, October 25, 1999 11:39
Backwards time travel on MOTM webpage
1999-10-26 by Elhardt@xxx.xxx
It s interesting that a couple of weeks ago the LFO module was due sometime this month (October). Now it has been moved backwards in time to a shipping date
Re: Having another one of my spells
1999-10-26 by Elhardt@aol.com
... The need for not supplied heat sink compound is also mentioned in bold print at the top of certain pages in the downloadable FAQ.
Re: Sloped rails
1999-10-26 by JWBarlow@aol.com
... Yes, these sound almost exactly like what I m thinking of except for my sloped cabinet I m thinking of two of your magic bus strips (one for each row of
Re: Carriers, Modulators, Sawtooths, & Ramps
1999-10-26 by JWBarlow@aol.com
... I usually refer to these as signal source and modulation source respectively. ... Yeah, I think Paul s designation of X and Y is more better since it
Re: Carriers, Modulators, Sawtooths, & Ramps
1999-10-26 by DAVEVOSH@aol.com
In a message dated 99-10-25 09:09:04 EDT, you write:
Good scope deal
1999-10-26 by Paul Schreiber
For those needing a good scope: see ebay item 186964336 Tek 475A with DVM44 option. This was a $3500 scope new! Now at $150. A beautiful scope. Paul S.
Demographics
1999-10-25 by Tkacs, Ken
Several suggested checking Onelist for info, but for some reason I ve been having problems hitting the site. The server seems to be wonky right now, or else
Re: Re: Bill's Babble & Ken's ranting I agree!
1999-10-25 by velure
name: steven c hanlon years aged: 27 style of noise: dub ambient trance locale: MD, USA, EARTH modules: 420 favorite cheese: extra sharp aged cheddar favorite
RE: Re: Bill's Babble & Ken's ranting I agree!
1999-10-25 by Christopher Jeris
... There s a thread on this topic in the archives, I forget how long ago ... I made the mistake of asking list members how old they were :) (I m 23, for what
RE: Re: Bill's Babble & Ken's ranting I agree!
1999-10-25 by Dave Bradley
You can view the member profiles for the MOTM list at http://www.onelist.com. Age info is available, for those of us who chose to include it. Dave Bradley
RE: Re: Bill's Babble & Ken's ranting I agree!
1999-10-25 by Tkacs, Ken
I love your never die slogan! Ha! It would be interesting to see a demographic chart of MOTM owners-ages, geography, etc. But I guess some would see it as an
Re: Bill's Babble & Ken's ranting I agree!
1999-10-25 by J. Larry Hendry
I knew it. I knew it. There are more oldish guys out there than it first appears. Wollensak? Heck, my mom had one of those when I was in grade school
RE: Carriers, Modulators,Kens'ranting I agree!
1999-10-25 by william Hanson
Yeah what about even before that like when Subotnick had a wollensak tape recorder, a couple of hp sine generators a half built buchla- and a tape splice