MOTM

I agree!  Looks great.

I would definitely concur that a trigger button on the panel would be
useful (although not essential).

The per-stage LED's would be much more essential for me.

I find the graphic by the transition-type switch to be perfectly sufficient.

Unfortunately, I seem to be in the minority by saying, PLEASE keep the
smaller knobs!!!  Going to a 4U width seems a bit extreme, the reasons for
not going to a 10U height are extremely good, and I wouldn't want to lose
any of the 8 stages.  Also, I would expect the knobs on an EG to see far
less real-time use than, say, knobs controlling filter cutoff, VCO
modulation attenuators, sub-octave level, LFO shape, etc. (although I
*know* there's gotta be someone out there who tweaks EG settings all the
time and rarely touches the other knobs I mentioned), so the size wouldn't
be as much of a concern to big-fingered folk (to be fair, I'll point out
that I have tiny little violinist's fingers, although that doesn't prevent
me from playing bass guitar).  And, actually, compared to the logically
finger-sized knobs on the other two modulars I'm using (or, for that
matter, on my old Korgs / Yamahas / EML101 / P600), I'm finding the larger
MOTM knobs to be overkill.  Which is not a bad thing, just an unnecessary
thing (for me!).

	-Doug
	 ceres@...

At 05:35 AM 08/22/2000 GMT, "thomas white" <djthomaswhite@...> wrote:
>Better in my opinion. A button to trigger the cycle from the panel would be 
>a cool addition!
>
>Thomas White
>
>
>>From: "Tony Karavidas" <tony@...>
>>Ok, here's a slightly modified version:
>>
>>(Same name, link provided for convenience)
>>
>>http://www.encoreelectronics.com/motm/ENVGEN2.JPG
>>
>>
>>The numbers around the knobs are gone, the stages have indicators above the
>>LEDs and the graphic is a little larger. (The name changed a bit too.)
>>
>>
>>Better...or worse?
>>
>>Tony