Here's a quantizer in MOTM format. Although it has white a metalic/white panel. It's also a 1/4 inch banana combo. http://www.analogic-acs.com/quantizer.html Cheers! Tobias Enhus > > For quantizing applications the wavetable output is used as a control > voltage. In this mode the Miniwave is set to the 0-10V scale, which > takes positive input voltages and puts out positive voltages. A > quantizer PROM has a table that translates the incoming voltage to the > nearest quantized value, assuming a 1V/octave control voltage. The > standard Blacet PROM has 16 quantized scales, and the Quantizer PROM > offers 256. http://stretta.com/~matthew/resources/waveproms/index.html > (Too bad these are not currently available.) > > -Richard Brewster > > > Jeff Laity wrote: > >> When you do this, are you using the PCM sample wave playback as an >> audio source or as a control voltage? >> >> On Jan 15, 2005, at 4:05 PM, Richard Brewster wrote: >> >> Many of us use the Wiard/Blacet Miniwave as a quantizer. It so >> happens >> I was just using it today. >> >> http://www.blacet.com/MW.html >> >> It comes with a quantizer bank in the PROM and there is another >> quantizer PROM available. Check the links on the page above. Larry >> Hendry has a Stooge panel (several different ones, actually) >> available >> in MOTM format for the Miniwave, and you can also use Front Panel >> Express to make a panel for it. Dave Hylander has a great >> expander for >> the Minwave that holds 10 EPROMs. >> >> http://www.hylander.com/miniwave.html >> >> http://www.wiseguysynth.com/larry/panel.htm >> >> -Richard Brewster >> >> Jeremy wrote: >> >>> Hi all, >>> >>> Just wondering if there's an analog voltage quantizer out there in >>> MOTM format? Or something similar? I've been using a Serge >>> quantizer but the whole banana + 1/4" jack thing gets annoying. >>> Cheers for any help. >>> >>> - Jeremy >>> >> > > > > > > Yahoo! Groups Links > > > > > > >
Message
Re: [motm] Quantizer
2005-01-16 by Tobias Machine Head