MOTM

John Blacet sells his Input module that would do the trick. 1/8" 
jacks, though, which can be tricky with guitar even if you have a 
nice STooge 1/4 to 1/8 cable.  The torque from walking around and 
stuff could mangle the not-so-robust jacks.  An alternative is to 
build that into a Stooge Panel or a Schaeffer panel.

Also, Tony does sell completed units and pre-populated boards.

Mike

--- In motm@yahoogroups.com, Dino Leone <d_p_leone@y...> wrote:
> This is exactly what I'm looking for!! I've been
> thinking about feeding my guitar into the MOTM filter,
> but it would be a lot more fun to trigger the EG with
> the guitar and thus modulate the cutoff etc.
> Is there an alternative to the below-mentioned Oakley
> EFG? It would certainly be fun to build the EFG myself
> - I guess I can order the PCB from oakley, but I still
> would need the front panel - and looking at both
> Schaeffer and FrontPanelExpress web pages left me
> pretty depressed... as a Mac user I'm out of luck.
> They just don't like us, right? ;-) Seriously, Is
> there any way for a Mac user to order an EFG front
> panel?
> All suggestions would be very welcome!!
> 
> With Best Wishes,
> Dino
> 
> 
> 
> --- Mike Marsh <michaelmarsh@s...> wrote:
> > The other thing I do (a lot) is to connect the
> > guitar through the 
> > various modules.  I have an Oakley EFG Deluxe and
> > from there I can 
> > get a gate and also send audio to one of the many
> > tasy MOTM 
> > filters.  FUnky!  The 510 makes an excellent hard
> > distortion device, 
> > btw.
> > 
> > Mike
> 
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Check out the new Yahoo! Front Page. 
> www.yahoo.com