MOTM

At 11:17 AM -0600 2003/01/23, J. Larry Hendry wrote:
>The straight cabinet is 10" deep.  For comparison, dot com are 8 1/2" and my
>personal cabinets are 11.5".  10' seems quite nice.  I have never actually
>had a 900 power supply in my hands (cough, cough), so I cannot comment on if
>10" would be deep enough to allow the power supply on the back.  I guess it
>depends on the recess of the front rack rails.  10" was plenty deep to have
>the power supply mounted inside and put a MOTM size module in front of it.
>However, Blacet and other deep brackets sized modules could not go in front
>of the power supply in the 10" deep cabinet.

I built my upper cabinets 10" deep and they are fine with a 900 in 
the back and regular MOTM modules in front. I just can't put a Time 
Machine directly in front of the 900 because the TM is too deep. I 
guess this will apply to any module that uses the looooong Stooge 
bracket. But all other modules seem to fit fine.