MOTM

> I've seen the same schematic.  It's just a sequential timer -- the first
> timer sets the delay time, the second timer sets the length of the gate
> out.  It does not preserve the pulse width of the incoming gate, in fact,
> it treats an incoming gate as a trigger -- completely ignoring the
trailing
> edge.  As such, it should be called a trigger delay.  Nor does it
recognize
> incoming triggers after the first timer is still armed.

hello all,
interesting, but since it's only going to cost around \ufffd2 in parts i'm going
to give it a go
then i can also learn how to buffer an LED properly...

cheers
paul b