Yahoo Groups archive

MOTM

Index last updated: 2026-04-28 23:35 UTC

Message

RE: [motm] UEG tweaks!

2001-02-22 by James Holloway

Go for it. I don't mind waiting a little longer for more features.

-- 
James Holloway
jimh54@... - email
(972) 993-2023 x1188 - voicemail/fax



---- "Tony Karavidas" <tony@...> wrote:
> Yes, I can't leave it alone!
> 
> What would you UEG owners say if the GATED-STEP mode (the simple sequencer
> mode) had this enhancement:
> 
> Allow the level to be adjusted WHILE the UEG is sitting still? This
> would
> aid in setting up pitch for each stage. Now if you like that idea,
> how about
> having LEVEL 1 through 7 control stages 1 through 7, AND IN ADDITION,
> have
> TIME1 control LEVEL8? Currently LEVEL8 must default to zero volts because
> there is no level control for stage 8. Robert Rich and I were on the
> phone
> and he suggested it's a little awkward to have to set the oscillators
> "base"
> note to correlate with the zero volt output from stage 8. (I kind of
> don't
> like burying things in the interface, but in this case it might be
> a good
> compromise)
> 
> If I here overwhelming "go for it" I'll add it to all the units that
> haven't
> shipped yet. For anyone that already has their UEG and wants this just
> send
> it to me and I'll update it.
> 
> I've also extended the TRIG OUT time to 5mS. This should help it trigger
> more things with ease.
> 
> Your quick reply is requested, people are waiting for these. The manual
> is
> done with exception of the above issues.
> 
> Tony Karavidas
> Encore Electronics
> 
> http://www.encoreelectronics.com
> 
> Designers of "The best MIDI to CV converter on the planet." -Keyboard
> Oct.
> 1997
> 
> 
> 
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
> 
> 
> 

__________________________________________________
FREE voicemail, email, and fax...all in one place.
Sign Up Now! http://www.onebox.com

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.