Re: [milter-greylist] Weird problem with Microsoft domains
2018-11-26 by Stefan Suurmeijer
Hi Emmanuel, that s good news! I ve been unable to find release notes or changelogs about that though. In which version was it changed?
Yahoo Groups archive
Messages
Page 2 of 144 · 7199 messages matched
2018-11-26 by Stefan Suurmeijer
Hi Emmanuel, that s good news! I ve been unable to find release notes or changelogs about that though. In which version was it changed?
2018-11-22 by manu@...
Stefan Suurmeijer stefan@raptorweb.nl [milter-greylist] ... There has been a recent change about DKIM key retrieval failure. Before: it always produced a SMTP
2018-11-21 by Stefan Suurmeijer
Nope, it s not. If you can see my follow-up we already worked out that apparently my nslookup command was the issue, dig resolved just fine. But thanks for the
2018-11-21 by Mauricio Teixeira
The TXT record is too big for a UDP packet, so the system is retrying in TCP mode. Most likely your firewall is blocking DNS via TCP. On Tue, Nov 20, 2018 at
2018-11-21 by john
Hi Stefan,I understand now. It seems like you cannot disable DKIM easily.Based on the link below, I assume something likedacl greylist dkim noneFollowed by
2018-11-21 by Stefan Suurmeijer
Hi John, No, not yet! I was looking for a configuration option to disable DKIM. I found this /dkim DKIM status (if build with DKIM support). Possible
2018-11-21 by john
Hi StefanHave you tried to set dkim to none in the configuration file?BestJohnStavefejl og lignende krediteres min Samsung Galaxy 8. ... Hi Atilla, DNS
2018-11-21 by Stefan Suurmeijer
Hi Atilla, DNS isn t the issue. Apparently nslookup (or my command) was the issue there, since: root@myhost:~# dig +short txt
2018-11-21 by Bruncsak, Attila
... You must have an issue with the domain name resolution. Try to fix it. For me it just works: $ dig +short txt
2018-11-20 by Stefan Suurmeijer
Hi list, I ve recently installed milter-greylist on 2 new servers. But I m running into a strange problem. Everything seems to work fine, except for mails
2018-11-11 by David Woodfall
Thanks. On Sunday 11 November 2018 14:57, ... -- The seven eyes of Ningauble the Wizard floated back to his hood as he reported to Fafhrd: I have seen much,
2018-11-11 by Jayson Smith
Hi, I assume what s happening is that Milter-Greylist is logging how long the message was actually delayed, based on not only the rule you have set up, but
2018-11-11 by David Woodfall
Right, I assumed that is the case, but I still don t see why Milter-Greylist is using a delay other than what I set it to. On Sunday 11 November 2018 14:37,
2018-11-11 by Jayson Smith
Hi, Just because you tell Milter-Greylist to delay for thirty seconds, that doesn t mean the remote server is going to try again that soon. The remote server
2018-11-11 by David Woodfall
Hello I have set greylisting as default with a short delay time: racl greylist default delay 30s autowhite 60d But I sometimes see in the logs that it s
2018-11-09 by Fred Smith
... GAH! I must be blind! thanks! -- ... The Lord is like a strong tower. Those who do what is right can run to him for safety.
2018-11-09 by Jens Schleusener
... Additionally one may get some according informations via the soure code diffs -reports on fossies.org https://fossies.org/diffs/milter-greylist/ Jens
2018-11-09 by Bruncsak, Attila
... Dear Fred, Those IP addresses were appropriately listed by IP based blacklist(s). I suggest you to try the DNSBL provider cbl.abuseat.org. Here is my
2018-11-09 by manu@...
Fred Smith fredex@fcshome.stoneham.ma.us [milter-greylist] ... Did you try the ChangeLog file in the distribution? -- Emmanuel Dreyfus
2018-11-09 by Fred Smith
Hi! I m looking for a version-history list so I can see what has changed between versions, but so far I ve not found it. Can someone of you point me in the
2018-11-05 by Bob Friesenhahn
... I see that my own spf rules (based on ideas from Jim Klimov) are perhaps excessively permissive: racl greylist spf softfail delay 120m racl greylist spf
2018-11-05 by Bob Friesenhahn
... Since SMTP is based on connection-oriented TCP, it is not possible to spoof the origin IP address. The origin IP address needs to at least be stable
2018-11-05 by manu@...
Fred Smith fredex@fcshome.stoneham.ma.us [milter-greylist] ... I note qq.com publishes SPF records, and none of the source IP addresses in your case match it.
2018-11-05 by John_Damm_S=c3=b8rensen
Sometimes I have been able to determine that the sender IP was from a cloud provider or similar in which case I added a firewall rule blocking the whole IP
2018-11-05 by Fred Smith
... might they be forged/spoofed addresses, such that the mail is not actually from those addresses? If so blacklisting blocks of them may be blocking innocent
2018-11-05 by Fred Smith
... Ah. thanks for the hint. I added: dacl blacklist header /From:.*qq.com/ flushaddr dacl blacklist header /From.*qq.com/ flushaddr dacl blacklist header
2018-11-04 by Bob Friesenhahn
... Recently I have found it necessary to explicitly blacklist blocks of IP addresses which are used by spam factories and use mailers which just don t give up
2018-11-04 by John_Damm_S=c3=b8rensen
I checked my spam archive and over the last 4 years I have also received spam where qq.com was used. It seems like qq.com was used in From: and Reply-To:
2018-11-04 by Fred Smith
I ve been using milter-greylist for a couple of years, with a huge reduction in spam. the past week or so I ve had a huge increase, and looking at
2018-08-10 by Brad Barnett
Running Debian stretch s version of milter-greylist, 4.5.11. I recently noticed an odd issue, after some local DNS changes. The reason why this issue cropped
2018-08-10 by manu@...
Jayson Smith jaybird@bluegrasspals.com [milter-greylist] ... IIRC, if you use spf clause in ACL, that disable the default SPF whitelist behavior, hence you can
2018-08-09 by Jayson Smith
Hi, I m new to the list. I ve been running Milter-Greylist for several months to try to cut down on spam received by an address which for various reasons must
2018-07-12 by manu@...
Bruncsak, Attila attila.bruncsak@itu.int [milter-greylist] ... I refered to the original problem, indeed. -- Emmanuel Dreyfus http://hcpnet.free.fr/pubz
2018-07-12 by Bruncsak, Attila
... I sent the patch in the attachment, yahoogroups show that in fact there is an attachment as web link, but it is inaccessible. May be yahoogroups is broken?
2018-07-12 by manu@...
Bruncsak, Attila attila.bruncsak@itu.int [milter-greylist] ... Hi Are you still working on it? -- Emmanuel Dreyfus http://hcpnet.free.fr/pubz manu@netbsd.org
2018-06-10 by Bruncsak, Attila
... It is normally a problem with the yahoo server. That may become visible after a while. By the way this patch is not really solves the problem, only
2018-06-10 by John_Damm_S=c3=b8rensen
Hi, The attachment does not exist on the server. Best John Den 10-06-2018 kl. 15:10 skrev Bruncsak, Attila ... Denne e-mail blev kontrolleret for virusser af
2018-06-10 by Bruncsak, Attila
... The bug was introduced around the beginning of 2010: 1c1
2018-06-08 by John_Damm_S=c3=b8rensen
I guess that the sync_send() function is called after the pending structure has been updated with the autowhitelist time. According to pending.h the structure
2018-06-07 by John_Damm_S=c3=b8rensen
I have now collected tcpdump trace illustrating the problem. When the peer is informed by an autowhitelist instance both times for the data and aw argument are
2018-06-07 by John_Damm_S=c3=b8rensen
Further testing seems to be realted to the fact that the date aw times sent to the peers are equal. This apparently tricks the peer to delete the entry. I
2018-06-06 by John_Damm_S=c3=b8rensen
Well I did some testing on my systems and indeed it seems like the autowhite information is not recorded by the peer. Instead when the del2 command is issued
2018-06-06 by John_Damm_S=c3=b8rensen
Also check in sync.c: #define SYNC_PROTO_CURRENT 3 On my system the sequence of commands sent to the peer are: vers3 del2 addr from rcpt
2018-06-06 by John_Damm_S=c3=b8rensen
Somewhat confusing the man page for the config file says that peer entries for the local host wil be ignored, which by the way also seems more reasonable.
2018-06-06 by John_Damm_S=c3=b8rensen
I don t know whether this matters. But one thing that crosses my mind is that it seems like you have all peers defined on all hosts. According to the man page
2018-06-05 by manu@...
Gienek Nowacki gieneknowacki@yahoo.pl [milter-greylist] ... I cannot think of a configuration problem that would let greylisting entries sync but not autowite
2018-06-05 by Gienek Nowacki
Hi, The connection between MX is working correctly. Maybe there is an error or mistake in my config file? The config is in the first post. The version of
2018-06-02 by manu@...
Gienek Nowacki gieneknowacki@yahoo.pl [milter-greylist] ... Well, I am stil wondering why it may be missing. Is it possible the connexion between the MX broke
2018-06-02 by Gienek Nowacki
Hi Readres, Could someone answer the question? Why the information about autowithe isn t distributed over all MX servers? Regards,Gienek 21:03 sobota,
2018-05-26 by manu@...
Bill Levering idbill@planx.com [milter-greylist] ... The domain still exists and belongs to proofpoint, but the fact they decided to not use it is quite odd.