Re: [milter-greylist] End of Yahoo groups
2019-10-17 by Rik van Kekem
... As I understand it, Yahoo groups won t shut down. It will just become limited. The mailinglist function should remain intact. (It will also become private
Messages
Browse messages
Page 1 of 144 · 7199 messages matched
Re: [milter-greylist] End of Yahoo groups
2019-10-16 by Trev
... Be aware that the zero-cost allows only 1GB of storage for emails, images, attachments etc etc. 10GB of storage is $US 10/month, 1TB of storage is $US
Re: [milter-greylist] End of Yahoo groups
2019-10-16 by Greg Troxel
manu@netbsd.org [milter-greylist] ... I don t really want to volunteer, but as I understand it, groups.io is the least icky
End of Yahoo groups
2019-10-16 by manu@...
Hello As I understand, Yahoo groups is going to shut down. Any volunteer for providing a mailing list somwhere else? -- Emmanuel Dreyfus
EOL of yahoo groups...
2019-10-16 by Bill Levering
As of October 21, users will no longer be able to post new content to the site, and on December 14 Yahoo will permanently delete all previously posted
Re: [milter-greylist] CVS/git source code repository
2019-07-16 by manu@...
Bruncsak, Attila attila.bruncsak@itu.int [milter-greylist] ... Well, the machine hosting the repository died a few months ago, I still need to replace it
RE: [milter-greylist] CVS/git source code repository
2019-07-16 by Bruncsak, Attila
... Sure, that is what I am normally doing, such as downloading the latest full package, thanks. On the other hand, I thought it is possible to access the
Re: [milter-greylist] CVS/git source code repository
2019-07-15 by Bill Levering
Did you try: https://ftp.espci.fr/pub/milter-greylist/ Bill
[milter-greylist] CVS/git source code repository
2019-07-15 by Bruncsak, Attila
Hello, Seemingly, the CVS source code repository referred at http://hcpnet.free.fr/milter-greylist/ and http://milter-greylist.wikidot.com/downloads with the
close connection on racl blacklist list
2019-06-25 by Marcus Schopen
Hi, since a few weeks I see a lot of delivery attempts on my mail servers to non-existent and existent addresses from hosts that are listed on the common
configure problem using option "--enable-dnsrbl"
2019-06-25 by Jens Schleusener
Hi, after migrating to a new OS with gcc version 7.4.0 (before version 4.8.5) I got a problem while building milter-greylist 4.6.2. If I use the configure
Re: [milter-greylist] Re: Possible SMTP RCPT flood, throttling and confBAD_RCPT_THROTTLE
2019-06-07 by Greg Troxel
Marcus Schopen lists-yahoogroups@localguru.de [milter-greylist] ... Why do you say it is incorrect? The milter said that recipients would not be accepted,
RE: [milter-greylist] Possible SMTP RCPT flood, throttling and confBAD_RCPT_THROTTLE
2019-06-07 by Bruncsak, Attila
... Probable explanation is: for the sendmail to decide what recipient is valid or not, it takes into account the return from the milters as well: 2xx code
Re: [milter-greylist] Re: Possible SMTP RCPT flood, throttling and confBAD_RCPT_THROTTLE
2019-06-07 by Marcus Schopen
... I don t think that s right. From sendmail docs: If set and more than the specified number of recipients in an envelope are rejected, sleep for one second
Re: Possible SMTP RCPT flood, throttling and confBAD_RCPT_THROTTLE
2019-06-07 by yahoo@...
... confBAD_RCPT_THROTTLE sets the maximum number of connections permitted per second per sendmail daemon. After this many connections are accepted, sendmail
Re: [milter-greylist] Possible SMTP RCPT flood, throttling and confBAD_RCPT_THROTTLE
2019-06-07 by manu@...
Marcus Schopen lists-yahoogroups@localguru.de [milter-greylist] ... You can throttle with milter-greylist, see ratelimit clauses in the man page. -- Emmanuel
Possible SMTP RCPT flood, throttling and confBAD_RCPT_THROTTLE
2019-06-06 by Marcus Schopen
Hello, i found by chance a strange phenomenon in my logfile: after three rcpt to to existing(!) addresses, which are marked with milter=greylist,
Re: [milter-greylist] Mailog message: milter-greylist: smfi_getsymval failed for {daemon_port}, using default smtp port
2019-05-16 by Marcus Schopen
Am 6.5.2019 05:43, schrieb Jobst Schmalenbach jobst@barrett.com.au ... I use in sendmail.mc: define(`MILTER ,1)
Re: [milter-greylist] Mailog message: milter-greylist: smfi_getsymval failed for {daemon_port}, using default smtp port
2019-05-07 by Jobst Schmalenbach
... Not quite ;-) as sendmail.cf gets destroyed upon restart. A better way in sendmail.mc before specifying INPUT_MAIL_FILTER:
Re: [milter-greylist] Mailog message: milter-greylist: smfi_getsymval failed for {daemon_port}, using default smtp port
2019-05-06 by manu@...
Jobst Schmalenbach jobst@barrett.com.au [milter-greylist] ... In sendmail.cf look for the O Milter.macros.connect and add {daemon_port} to the list. --
Mailog message: milter-greylist: smfi_getsymval failed for {daemon_port}, using default smtp port
2019-05-06 by Jobst Schmalenbach
Hi Install is CentOS 7.X, sendmail 8.14.7-5.el7, milter-greylist 4.6.2-2.el7 I constantly get a message in the logs: milter-greylist: smfi_getsymval failed
Re: [milter-greylist] milter-greylist and postfix
2019-05-02 by Grammes, Carsten
Am 02.05.2019 um 16:37 schrieb Serge Stepanov serhioz@gmail.com ... Yeah. Finally manged to get it running by using milter-manager in between postfix and
Re: [milter-greylist] milter-greylist and postfix
2019-05-02 by Serge Stepanov
Postfix is chrooted in /var/spool/postfix. чт, 2 мая 2019 г., 17:15 Grammes, Carsten cgrammes@gmx.net ... Postfix is chrooted in /var/spool/postfix.
milter-greylist and postfix
2019-05-02 by Grammes, Carsten
I m running sendmail with milter-greylist for 10+ years without any problems. Wanted to switch to postfix on a new machine and find no working way how to
Re: [milter-greylist] dealing with mail relay "pools"?
2019-04-25 by Steve Rikli
... After checking the milter-greylist src README for ideas & references, I found the section dealing with mail farms which mentions SPF as one (partial?)
Re: [milter-greylist] dealing with mail relay "pools"?
2019-04-25 by Christian Pélissier
Le jeudi 25 avril 2019 à 08:12 -0400, Andrew J. Schorr ... Sorry gmail.com and nasa.gov are not good examples because MX receive mail and SPF listed TXT
Re: [milter-greylist] dealing with mail relay "pools"?
2019-04-25 by John_Damm_S=c3=b8rensen
I think if you go through the logs you will see that the servers handling a retries of a specific mail are all on the same subnet. That s what I observed.
Re: [milter-greylist] dealing with mail relay "pools"?
2019-04-25 by Andrew J. Schorr
... But if you look at the SPF records for gmail.com, which I think are more relevant than the MX records for this purpose, you see more subnets: dig +short -t
Re: [milter-greylist] dealing with mail relay "pools"?
2019-04-25 by Christian Pélissier
Le mercredi 24 avril 2019 à 22:22 +0200, John Damm Sørensen ... subnetmatch /16 or less /12 is better. For example gmail has four MX CIDR:74.125.0.0/16 and
Re: [milter-greylist] dealing with mail relay "pools"?
2019-04-24 by John_Damm_S=c3=b8rensen
Provided that the members of the relay pool reside in the same subnet this statement is your savior: subnetmatch /24 Best John Den 24-04-2019 kl. 15:45 skrev
Re: [milter-greylist] dealing with mail relay "pools"?
2019-04-24 by Bob Friesenhahn
... Using whitelisting DNS validation and/or SPF validation and some measure of trust for hosts which pass these tests might be acceptable when greylisting is
dealing with mail relay "pools"?
2019-04-24 by Steve Rikli
I ve been happily using milter-greylist for a few years, with pretty great results -- spam level is barely noticeable, and I m only using greylist by itself at
Re: [milter-greylist] racl greylist with extended regex
2019-04-12 by manu@...
Christian Pélissier Christian.Pelissier@onera.fr [milter-greylist] ... /^[a-z]{4,16}[bcdfghjklmnpqrstvwxz]{6,10}[a-z]{4,16}@[a-z]{4,16} .icu$/ delay 4h
Re: [milter-greylist] racl greylist with extended regex
2019-04-10 by Christian Pélissier
Le mercredi 10 avril 2019 à 13:47 +0200, Johann Klasek johann@klasek.at ... For the racl keyword , which env from is compared to /regex/ ? firstname
Re: [milter-greylist] racl greylist with extended regex
2019-04-10 by Johann Klasek
On Wed, Apr 10, 2019 at 10:08:03AM +0200, Christian Pélissier Christian.Pelissier@onera.fr [milter-greylist] wrote: [..] ... I m not sure, but you might
racl greylist with extended regex
2019-04-10 by Christian Pélissier
Hello I want to greylist envelope from address like the following one martinwbqxmgwlegros@thesmartpune.icu with the following regex directes in greylist.conf
Re: [milter-greylist] ftp.espci.fr down?
2019-04-03 by manu@...
Marcus Schopen lists-yahoogroups@localguru.de [milter-greylist] ... No outage reported. If it does not work with https for some reason, you caan try
Re: [milter-greylist] ftp.espci.fr down?
2019-04-02 by Bob Friesenhahn
... It is working for me. Patience is a virtue! Bob -- Bob Friesenhahn bfriesen@simple.dallas.tx.us, http://www.simplesystems.org/users/bfriesen/
ftp.espci.fr down?
2019-04-02 by Marcus Schopen
Hi, can t download source. https://ftp.espci.fr seems to be down. Cheers! M.
Re: [milter-greylist] Reading config data or lists from a second file?
2019-02-15 by manu@...
Jayson Smith jaybird@bluegrasspals.com [milter-greylist] ... There is no include mechanism, but as Attila pointed, you can generate the config file
RE: [milter-greylist] Reading config data or lists from a second file?
2019-02-15 by Bruncsak, Attila
... Hello Jayson, You can always write the main configuration file using a script. That is what I am doing; the current size of my greylist.conf is a bit more
Reading config data or lists from a second file?
2019-02-14 by Jayson Smith
Hi, What I m wanting to do is to make Milter-Greylist whitelist anyone who has ever sent to a particular Email address, as long as those messages are
Re: [milter-greylist] Is it Comcast or is it me?
2019-02-14 by manu@...
Jayson Smith jaybird@bluegrasspals.com [milter-greylist] ... I have no definitive information on that topic, but if that holds true, we have a broken site list
Re: [milter-greylist] Is it Comcast or is it me?
2019-02-14 by Jayson Smith
Hi, I don t think that s even the issue. As far as I can tell, Milter-Greylist is working correctly at my end. I assume the problem is that Comcast is trying
Re: [milter-greylist] Is it Comcast or is it me?
2019-02-13 by John_Damm_S=c3=b8rensen
Comcast is probably using many different mail servers to resend messages so my question is have you configured subnetmatch? From man page: /subnetmatch/ This
Is it Comcast or is it me?
2019-02-13 by Jayson Smith
Hi, I m using Milter-Greylist mainly to filter spam received by the submissions Email address for an online magazine, which by definition must be public. This
Re: [milter-greylist] Re: --enable-postfix debian stretch fails
2018-12-14 by Kovács Gábor
Thank you very much John! After this patch the package build is ok. ... +++ milter-greylist.h 2014-10-12 09:25:36.000000000 +0200 @@ -249,11 +249,9 @@
Re: [milter-greylist] Re: --enable-postfix debian stretch fails
2018-12-14 by john
Solution seems to be here https://milter-greylist.yahoogroups.narkive.com/kO7ThpBT/any-newer-version-than-4-3-9-co BestJohn Stavefejl og lignende krediteres
Re: --enable-postfix debian stretch fails
2018-12-14 by Kovács Gábor
Hello I wanted to greylisting emails only if they reach a spam score greater than 5. milter-greylist seems to be the only solution for this. I am using debian
Re: [milter-greylist] Weird problem with Microsoft domains
2018-11-27 by manu@...
Stefan Suurmeijer stefan@raptorweb.nl [milter-greylist] ... At least it is present in 4.5.15. -- Emmanuel Dreyfus http://hcpnet.free.fr/pubz manu@netbsd.org