Want To Buy an EX800
2014-04-02 by <siraltus@...>
Heyas fellow Korgers. I m looking to buy an unmodified EX800 in great cosmetic condition. Minor wear such as a few very small scratches are okay, but no major
Messages
Browse messages
Page 25 of 141 · 7050 messages matched
Re: Korg Poly-800 mkII // Digital Line Noise Issue...
2014-03-25 by <bperkins211@...>
have you tried using the MII in a different location/room/outlet (if on AC adaptor). How about running on batteries? Any evidence of someone inside the unit?
Korg Poly-800 mkII // Digital Line Noise Issue...
2014-03-25 by <quiet_channel@...>
Hello! My Poly-800 mkII has quite a high noise-to-signal ratio. I have listened closely and it sounds not like the white noise generator, but more like
Re: EX800 Rack Ears
2014-03-24 by <domgoold@...>
no but mine are off atm, and i could give you precise dimensions so you can have some made? ;-)
EX800 Rack Ears
2014-03-23 by <ritchiedrums@...>
I really need a pair of Rack Ears for my EX800. Any For Sale??
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-23 by <domgoold@...>
yes, and that knobman file is what i consider an optimal way to make these as custom graphics: i ve made the same one before with much more effort! :) this is
More Soft LFO (VST) goodness..
2014-03-23 by <bperkins211@...>
Been doing some more tweaking on the VST versing of the GUI I ve been working on. I swapped out the Filter s msg from the GUI to be simply CC74, instead of the
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-22 by <bperkins211@...>
Dom, the only way to dump from or to the HAWK via MIDI is with a Sysex msg that begins with a few bytes of header info followed by either a single dump for
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-22 by <domgoold@...>
(you had asked for a LCD font)
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-22 by <domgoold@...>
ah :D wow, was a bit voluble/hyper yesterday :) and mixing discussion with creating plugin. was wondering if you can restore a patch sending MIDI CCs instead
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-22 by Michael Hawkins
Can the HAWK do sequential type full patch dump/load with MIDI CC(?) A: I am not quite sure I understand what you mean. Can you rephrase the question? Mike,
Using a Roland PCR to control Hawk 800 and others Sysex help?
2014-03-21 by F Aitken
Hi, I m in the process of setting up a PCR30 to control my HAWK 800. The easiest approach is probably just to assign each knob/slider/button a CC# to control
Using a Roland PCR to control Hawk 800 and others Sysex help?
2014-03-21 by F Aitken
Hi, I m in the process of setting up a PCR30 to control my HAWK 800. The easiest approach is probably just to assign each knob/slider/button a CC# to control
Using a Roland PCR to control Hawk 800 and others Sysex help?
2014-03-21 by F Aitken
Hi, I m in the process of setting up a PCR30 to control my HAWK 800. The easiest approach is probably just to assign each knob/slider/button a CC# to control
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-21 by <domgoold@...>
Blaine, try just faking the LFO with events spaced at 16ths or somet ing, that should be more than enough to get a reasonable curve - i listen to some things,
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-20 by <bperkins211@...>
there may be ways to decrease the resolution of data from the soft LFO. The one I have used so far is FL and there are tweaks for MIDI controls I have yet to
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-20 by Alex Drinkwater
Having a stepped LFO quantized to MIDI clock divisions is also quite cool as an effect in its own right. a|x ________________________________ From: Michael
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-20 by Michael Hawkins
software induced LFO I guess there might be a time resolution option that you can set to slow down the number of CC s that are sent for any shape waveform.
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-20 by <bperkins211@...>
I think the problem is when I use a software induced LFO, drawn out and it tries to send to the HAWK very quickly a series of numbers between 0-99, twice. One
Re: [korgpolyex] Re: VST gui Plugin Sneak Peek
2014-03-20 by Michael Hawkins
1) HAWK does not have a sysex message for changing a single parameter. That s a feature I should add to the code. 2) There are MIDI CC s for every HAWK
Re: VST gui Plugin Sneak Peek
2014-03-19 by <domgoold@...>
ah! now i remember where i got the digital font from :) i m using it here - didn t Mike want a digital font? that s pretty good, except it aligns wrong for a
Re: VST gui Plugin Sneak Peek
2014-03-19 by <domgoold@...>
do you have to deal with float in Ctrlr? if you want it to reset centre, that s 0.5 on a 0 to 1 range, even if your values go eg: -1 to +1(it would reset at
Re: VST gui Plugin Sneak Peek
2014-03-19 by <domgoold@...>
ah you ve mastered Ctrlr - i ve found that quite painful to get around, so i left it alone, but i think he develops it all the time. i think i wished it could
Re: VST gui Plugin Sneak Peek
2014-03-19 by <snugglepussyisme@...>
This is truly awesome, thanks for sharing your hard work! Do you plan to release a VST-enabled version soon?Thanks for doing this!!! I ve been wanting to
Re: VST gui Plugin Sneak Peek
2014-03-18 by <bperkins211@...>
Thanks Dom. I doubt I can thin the data out enough. I have tried many different ways w/out any luck. I have done this to my Kawai K3 and it performs
Re: VST gui Plugin Sneak Peek
2014-03-17 by <domgoold@...>
hey that looks really cool - you can always thin out the CC data, can t you. thanks for pointing out that MIDI CC knob prefab :D excellent, hadn t seen that -
VST gui Plugin Sneak Peek
2014-03-16 by <bperkins211@...>
I have started to dig in to the GUI I ve been working on and posted for download awhile back. I managed to make it so it can be ran as a VST plugin and only
Re: Rack mount kit
2014-03-16 by <snugglepussyisme@...>
I like it!
Re: [korgpolyex] Re: Power circuit repair.
2014-03-13 by Gordon JC Pearce
... I don t think they re quite as bad as people say. They *do* go, but if they do you know about it ;-) -- Gordonjcp MM0YEQ
Fw: [4]
2014-03-13 by makaom@...
Hello! http://jscans.baka-koneko.com/-news.facebook.com?jkiwezoqixohy ... Sent: Thu, 13 Mar 2014 10:02:55
Re: [korgpolyex] Re: Power circuit repair.
2014-03-13 by <backshall1@...>
Was there any truth to all the hype about bad tantalum caps in the ‘70s? I had an ARP Odyssey a couple of years ago that seemed okay so I didn’t touch
Re: Power circuit repair.
2014-03-12 by <bperkins211@...>
I agree that caps are not a typical failure point in 80 s gear.. late 90 s to late 00 s can be another thing though.. the great cap plague era. I did have a
Re: [korgpolyex] Re: Power circuit repair.
2014-03-12 by Gordon JC Pearce
... I don t bother to check them with an ESR meter. That can t tell you anything particularly useful. Diagnose the fault properly. Look at the symptoms, look
Re: Power circuit repair.
2014-03-12 by <bperkins211@...>
Doesn t anyone check electrolytic caps with an ESR tester before blindly replacing them? The kind of meter that checks them in circuit..
Re: [korgpolyex] Power circuit repair.
2014-03-12 by Sami Jumppanen
Good point! I wasn t clear enough. The failed components need to be pinpointed. I didn t mean caps can just be replaced in the hope of getting things better.
Re: [korgpolyex] Power circuit repair.
2014-03-11 by <backshall1@...>
Totally agree with Gordon on that one. Replace only bad caps, not the good ones, and low voltage electrolytics rarely fail. If your multimeter doesn’t have a
Re: [korgpolyex] Power circuit repair.
2014-03-11 by Gordon JC Pearce
... ... and I generally recommend people scrap equipment that s been subjected to re-capping when they bring it round for me to resurrect. I ve pretty much
Re: [korgpolyex] Power circuit repair.
2014-03-11 by Sami Jumppanen
Hi, some words about the 78 series regulators amd capacitors. Regulators are pretty failsafe. I just don t remember if they have overheat protection (check the
Re: [korgpolyex] Power circuit repair.
2014-03-11 by <backshall1@...>
What are the voltages like? Are the +5 and –5 reasonably close to what they should be? Don B From: josh.nursing@gmail.com Sent: Tuesday, March 11, 2014 4:29
Re: [korgpolyex] Power circuit repair.
2014-03-11 by <josh.nursing@...>
Thanks Don, I d be tempted to do that and sort it out, for now it looks like it draws too much current and I haven t been able to pinpoint the issue.
Re: [korgpolyex] Power circuit repair.
2014-03-11 by <backshall1@...>
I did a 7805 replacement once, but I didn’t take any pictures and I sold that one a few years ago. I removed EVERYTHING in the +5V regulator circuit, Q1, Q2,
Re: Power circuit repair.
2014-03-11 by <alpemannen@...>
If theres a fuse in there Id pick that up as well.
Power circuit repair.
2014-03-09 by <josh.nursing@...>
I am looking to solve the power issue completely once and for all in the Poly-800. What are the parts that I can order for repair and replacing existing ones?
Re: [korgpolyex] Rack mount kit
2014-03-05 by Michael Hawkins
I have created a display/keypad PCB that will fit into this
Re: [korgpolyex] Rack mount kit
2014-03-04 by Lasse T
Sounds interesting. Mvh / Lasse T. ... From: Michael Hawkins To: korgpolyex@yahoogroups.com Sent: Monday, March 03, 2014 10:09 PM Subject: [korgpolyex] Rack
RE: Joystick ???
2014-03-04 by <alpemannen@...>
No that didnt work, theyre obviously doing something. It does zero as its at the middle point between the other two taps, but it also moves from 0-5 depending
Re: [korgpolyex] Rack mount kit
2014-03-04 by Atom Smasher
... ================= i ve been out of the loop and lurking inconsistently over the last few years. i wonder if it would be feasible to make a rack-kit work
Re: [korgpolyex] Rack mount kit
2014-03-03 by Héctor David Polo Cheva
Great! I ll be waiting for it! Enviado desde mi smartphone BlackBerry 10. De: Michael Hawkins Enviado: lunes, 3 de marzo de 2014 16:10 Para:
Rack mount kit
2014-03-03 by Michael Hawkins
As an update that has been years in the making... I am working on the rack kit again. The goal is to produce a 1RU kit that allows you to take your EX-800 or
Re: [korgpolyex] Joystick ???
2014-03-03 by Michael Hawkins
Looks like it probably does the same thing for the Poly-61 as it does for the Poly-800. It s intended to zero the center position. Only problem is, the