Korg Mono/Poly

in need of service

2008-03-10 by A

Please help my VCO3 is way outta tune it is very high pitched and sounds real bad. I found the service manual online but I don t really know where to take it

Thread view Attachments: 0

Re: monoploy arpeggiator

2008-03-07 by alanmdicker

If you using a computer to sequencer and you want to sync the monopoly arp up to it then there is a simple way that I found to work with any synth with an arp

Thread view Attachments: 0

Re: [korg_mono-poly] monoploy arpeggiator

2008-03-07 by Florian Anwander

Hi Vince ... as you can read in the text, doepfer does: ...We offer such a special cable at a price of about Euro 20.00 - 25.00 (depends upon cable length and

Thread view Attachments: 0

RE: [korg_mono-poly] monoploy arpeggiator

2008-03-07 by vince a

thanks florian!!! looks not too hard...hehe umm would there be anywhere or anyone who sells this type of adapter? thanks again. vince ...

Thread view Attachments: 0

Re: [korg_mono-poly] monoploy arpeggiator

2008-03-07 by Florian Anwander

Hi Vince ... Originally the arpeggiator clock in is a switched trigger input (means: shorten tip to ground advances the arpeggio one step). To use it with a

Thread view Attachments: 0

monoploy arpeggiator

2008-03-06 by devsaroopsingh

Hi there, just wondering how i can trigger the arpeggiator? Would a tr 808 work ...or what can i use to trigger this? thanks, vince

Thread view Attachments: 0

You have received a NEW friend request!

2008-03-04 by matchbkyfriends

You have received a NEW friend request! Check this request here: http://www.beep.com/memberdateien/members/kinbegen

Thread view Attachments: 0

RE: [korg_mono-poly] New Member and Mod Question

2008-02-24 by Casey Grabowski

Oops! Opened it up, and it doesn t go anywhere! All the wires are snipped! Guess it was an idea gone sour. I would still like to know what kind of cable I

Thread view Attachments: 0

Re: [korg_mono-poly] New Member and Mod Question

2008-02-19 by Anwander, Florian

Hi Casey ... The picture doesn t say too much. It would be more helpful to open the MonoPoly and take a shot from the inside to show where the cables go to.

Thread view Attachments: 0

New Member and Mod Question

2008-02-19 by tricmagazine

Hi, I m a new member as of a few minutes ago! I hope you all don t mind, but I made a new photo album called mods for people to share their Mono/Poly mods,

Thread view Attachments: 0

Re: [korg_mono-poly] Re: Oscillator Tuning (Scaling)

2007-12-27 by Scott Deyo

Change your electrolytics, maybe. I had to replace mine on my filters a couple years ago. If you re having global problems, maybe it s your power supply. Maybe

Thread view Attachments: 0

Re: [korg_mono-poly] Re: Oscillator Tuning (Scaling)

2007-12-27 by Chase Smith

Hello, Upon the previous suggestion, I was able to get a bit closer to the problem, but still no solution. However, I am hoping that my new information makes

Thread view Attachments: 0

Re: [korg_mono-poly] Re: Oscillator Tuning (Scaling)

2007-12-27 by Chase Smith

Hello, Upon the previous suggestion, I was able to get a bit closer to the problem, but still no solution. However, I am hoping that my new information makes

Thread view Attachments: 0

Re: [korg_mono-poly] Re: Oscillator Tuning (Scaling)

2007-12-23 by Florian Anwander

Hi Chase ... You might try to isolate the error also by disconnecting some boards, and measure the rest: +++ means switch power on --- means switch power

Thread view Attachments: 0

Re: [korg_mono-poly] Re: Oscillator Tuning (Scaling)

2007-12-23 by Chase Smith

Yeah, I did that awhile ago but in the course of him fixing that problem another problem arose and I ran out of money so now I have to fix it myself. Now I

Thread view Attachments: 0

Re: Oscillator Tuning (Scaling)

2007-12-23 by envia94

Maybe you should contact a professional synth repair man. It will ofcourse cost a little, but save your own time to a profitable work.

Thread view Attachments: 0

WTB: EES MIDI CV-7

2007-12-12 by Florian Anwander

Hi, I am looking for a EES MIDI CV 7 MIDI/CV-interface. I am in the european union, but world wide offers are welcome. Florian

Thread view Attachments: 0

Re: [korg_mono-poly] MIDI-Retrofit from Mungo-Systems

2007-12-06 by Florian Anwander

Hello Alan That s good news. Is there anyone in the european union interested in a bulk buy of the kit version (John told me he can do good offers for the kit,

Thread view Attachments: 0

Re: [korg_mono-poly] MIDI-Retrofit from Mungo-Systems

2007-12-05 by Alan Dicker

I installed one of these in my Juno 6. I got my self the £50 self esembelt option. John was very helpfull over email whern I came up against a few problems

Thread view Attachments: 0

MIDI-Retrofit from Mungo-Systems

2007-12-05 by Florian Anwander

Hello, I found a great MIDI Retrofit for the MonoPoly. Its produced by Mungo Enterprises in Australia. http://home.netspeed.com.au/aistorm/midiretrofits.html

Thread view Attachments: 0

Re: Info need please

2007-11-07 by alanmdicker

... I paid £450 on ebay for mine but have seen them go for £420/30 before now.

Thread view Attachments: 0

Re: [korg_mono-poly] Info need please

2007-11-07 by Florian Anwander

Hi Balthazar, I find it usually useful to search in ebay for Completed listings only - though it is not necessarily the real measure. I paid for mine 590

Thread view Attachments: 0

Re: Info need please

2007-11-07 by strayn2000

... This may not be too helpful to you in determining a reasonable price for this synthesizer, but I got mine free from a local high school, clearing out a

Thread view Attachments: 0

Info need please

2007-11-07 by balthazarr8

New here. Just interested in what the range in prices is for these.

Thread view Attachments: 0

Re: Looking for a few parts for my Mono/Poly

2007-09-10 by plus_321

Check ebay for a seller called chipforbrains or something similar and he sells at least volume (oscillator, main) pots and the push buttons. I believe the push

Thread view Attachments: 0

Oscillator Tuning (Scaling)

2007-09-09 by plus_321

Hello, I recently acquired a mono/poly that has oscillator 1 out of scale. I ve read the calibration procedure in the service many and I m not sure if I am

Thread view Attachments: 0

Patch Settings

2007-08-31 by cprescott08

Just picked up a Mono/Poly and wanted to know if anyone has some cool patch settings they d be willing to share. Thanks!

Thread view Attachments: 0

Looking for a few parts for my Mono/Poly

2007-08-26 by hoggybogger

I am wondering if anyone has any tips or leads on where to find these parts for a mono/poly: - Main volume potentiometer - Frequency potentiometer (the first

Thread view Attachments: 0

Re: [korg_mono-poly] cymbal synthesis

2007-07-30 by Florian Anwander

Hi ... The the MonoPoly lacks a hipass filter, which is most relevant part for a synthesized cymbal. Cymbal produce more low frequencies, than you would

Thread view Attachments: 0

Re: [korg_mono-poly] cymbal synthesis

2007-07-28 by Scott Deyo

try this: get a really clangorous unison patch going (use fm and freq mod, detuning, etc.) now turn all the oscillators down in volume quite a bit, but turn

Thread view Attachments: 0

cymbal synthesis

2007-07-28 by MATT

does anyone know any good ways to get a good crisp cymbal sound out of my mono/poly? ive been trying and filtering then eq ing white noise just isnt cutting

Thread view Attachments: 0

Irukandji

2007-07-24 by MATT

ive been working on a project recently that uses the mono/poly as the only synth. the sounds from the mono/poly are recorded into my powerbook then sequenced

Thread view Attachments: 0

Re: Just got a Mono/poly

2007-05-05 by vldmrssnsgrbjrn

Hi, Thanks, I´ll have to chech this stuff out, I noticed that when I turn the mono/poly on all of the lights flash, also the one on the poly button, Every

Thread view Attachments: 0

Re: [korg_mono-poly] Just got a Mono/poly

2007-05-03 by Florian Anwander

Hi vldmrssnsgrbjrn (???) ... I don t think that the uP is the cause. Does selecting the polymode unselect the Unisono or Uni/share mode? If yes - only the LED

Thread view Attachments: 0

Re: Just got a Mono/poly

2007-05-02 by vldmrssnsgrbjrn

What I am perhaps most concerned with is if this has anything to do with the micro computer which I believe governs the function of these buttons or if it is a

Thread view Attachments: 0

Just got a Mono/poly

2007-05-02 by vldmrssnsgrbjrn

Hi, I just purchased a mono/poly which is pretty great except that I can t seem to assign the poly button, It doesn t light up and I seem to be stuck in either

Thread view Attachments: 0

Re: [korg_mono-poly] Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by Florian Anwander

Hi Rich ... All you said is valid for me (with the exception, that I am using Ableton Live and/or Logic). It would be perfect to have the five octaves as

Thread view Attachments: 0

Re: [korg_mono-poly] Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by Jase From Outta Space

... Just a (contraversial) suggestion: Have you tried Korg s own Mono/Poly VST model which comes part of the very cheap Analogue Edition 2007 package?

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: Anyone using the MidiJack on their Mono/Poly?

2007-03-29 by hoggybogger

I would like to be able to utilize the arpeggiator and poly modes, I think it might depend on how much it costs to buy a unit that does it. I also own a

Thread view Attachments: 0

Re: [korg_mono-poly] Anyone using the MidiJack on their Mono/Poly?

2007-03-28 by Florian Anwander

Hi Rich, ... Looks, like the MIDI-Jack is a simple standard MIDI to CV/Gate interface. It is definitely NOT cheap. A Doepfer MCV4 costs may 20 USD more, but

Thread view Attachments: 0

Re: [korg_mono-poly] Anyone using the MidiJack on their Mono/Poly?

2007-03-28 by Florian Anwander

Hi Rich, ... Looks, like the MIDI-Jack is a simple standard MIDI to CV/Gate interface. It is definitely NOT cheap. A Doepfer MCV4 costs may 20 USD more, but

Thread view Attachments: 0

Re: [korg_mono-poly] Anyone using the MidiJack on their Mono/Poly?

2007-03-28 by Florian Anwander

Hi Rich, ... Looks, like the MIDI-Jack is a simple standard MIDI to CV/Gate interface. It is definitely NOT cheap. A Doepfer MCV4 costs may 20 USD more, but

Thread view Attachments: 0