Anyone installed Lotharec's SD Floppy Emulator Rev F ?
2012-10-27 by Gil
There were some talks a while ago about the new Rev. F of Lotharec s floppy emulator. Has anyone installed it in their E-II ? Any impressions ?
Messages
Browse messages
Page 2 of 48 · 2353 messages matched
The currents (in amperes) for the PSU
2012-10-23 by gregalt57
Hello to everyone, Does anyone know for sure the currents (in amperes) for each of the four power rails of the PSU? I need this information very much....
Re: Sound Designer didnot find the E2 Sound on CD....
2012-10-21 by Wolfram Niessen
pre listen will take its time. Mutch more easy is to use EMXP to convert them to SF and pre listen in Kontakt. Gruß aus Köln ;-)
Re: Sound Designer didnot find the E2 Sound on CD....
2012-10-21 by tonmann1970
I thought that would be the best way to select sounds and to make a prelisten .. Thanks for the information, greetings fron Bochum/Germany
Re: Sound Designer didnot find the E2 Sound on CD....
2012-10-21 by Wolfram Niessen
No, as I now not. If you want to edit just a Sample you must receive a single sample from the EII. But why do you want to open it in Sounddesigner?
Re: Sound Designer didnot find the E2 Sound on CD....
2012-10-21 by tonmann1970
Is it not possible to transfer the sounds from CD in SD first ??
Re: Sound Designer didnot find the E2 Sound on CD....
2012-10-21 by Wolfram Niessen
If it is a CD with SD2 or EII Files you can You use the Send to EII function in Sounddesigner. A File select Window will open and you can select you file and
Sound Designer didnot find the E2 Sound on CD....
2012-10-21 by tonmann1970
Hello everybody, i have a E2 + with MAC SE30 and Sound Designer runs fine. I have also a CD with Sounds for Sound Designer. My question is, how must i convert
Re: [emulatorII-list] Re: EII HxC Floppy problem
2012-10-17 by dblondin@dblondin.com
That sounds similar to a problem I was experiencing last night. Whenever you create an HFE file with the HxC software, check the file size. If it s spitting
Re: EII HxC Floppy problem
2012-10-17 by Wolfram Niessen
YES, if I save d Disk by the EII, I can load it from the HxC. And I Build a EII Image by EMXP and this works too! So it seams that the HxC Software did not
Re: [emulatorII-list] EII HxC Floppy problem
2012-10-17 by dblondin@dblondin.com
If you can boot the OS then you have a working HFE file correct? After booting have you tried saving a bank and loading it back in? Trying to get a better
EII HxC Floppy problem
2012-10-17 by Wolfram Niessen
Hi, I build a HxC Floppy in my EII HD+ and I can boot from it. But I can t load a Bank. ??? When I boot (OS 3.1 HD, or non HD) the EII say Null Present and
Re: [emulatorII-list] Re: EMXP runs on vintage Macintosh?
2012-10-15 by James Ulibarri
Gary, Sorry, non for sale. You can build one yourself. Find a clean vintage Macintosh case, source a new 8 Century monitor from Japan. Buy the fastest Mac
Difference between the S3528 and S3528B circuits
2012-10-14 by gregalt57
Does anyone know the difference between the S3528 and S3528B circuits? Is the S3528B a 100 percent substitute for S3528 ?
Re: EMXP runs on vintage Macintosh?
2012-10-14 by garypratt560
Hi, That is beautiful. Did Apple start making these old units again? Or is this some kind of custom thing? That unit wouldn t happen to be for sale would it?
Re: [emulatorII-list] Re: EMXP runs on vintage Macintosh?
2012-10-09 by James Ulibarri
8 (foot) image I meant, not 8 inch. my bad. I ll post an image soon.
Re: [emulatorII-list] Re: EMXP runs on vintage Macintosh?
2012-10-09 by James Ulibarri
Thanks. I actually swapped cases from a Macintosh Classic II to a Mac Plus since I shot that image. It looks even more nostalgic. Those cases are tough to
Re: EMXP runs on vintage Macintosh?
2012-10-09 by woioioi
WOW!!!! Awesome :)))
EMXP runs on vintage Macintosh?
2012-10-08 by James Ulibarri
Runs like a champ off a 2012 Mac Mini Server. 16gb of Crucial memory. 2 Crucial SSD hard drives. 2.0GHz quad-core Intel Core i7 running Boot Camp with OSX
Re: E II +HD OS3.1 image
2012-09-30 by esynthesist
You can download this here: http://www.emxp.net/Additional_downloads.htm
E II +HD OS3.1 image
2012-09-29 by Wolfram Niessen
Hello, can anybody send me an Image of an OS 3.1HD? Thanx
Re: Sampling Noise Problem?
2012-09-13 by ataritt
Check the 1 and 10 Uf capacitors in the anti-aliasing filter. Probably consists of a series of op-amp IC s and a bunch of those cap s. First look for oxydation
Re: [emulatorII-list] Emulator II Sequencer Question
2012-09-09 by Simon Forsyth
Oh boy!.. you still have a UMI?l... if you ever decide to sell, let me know S ________________________________ From: umi4m@yahoo.com To:
Re: [emulatorII-list] Emulator II Sequencer Question
2012-09-09 by umi4m@yahoo.com
And hence my email address name origin is discovered:). Still have The old umi4m running off a Master 128 actually. Not very practicle anymore Innovative for
Re: [emulatorII-list] Emulator II Sequencer Question
2012-09-09 by clem fallon
Hi Simon Ahh! Thanks for the info. I knew I d hear something along them lines before. I d say there was plenty of teeth gnashing when the DM80 went down. Clem
Re: [emulatorII-list] Emulator II Sequencer Question
2012-09-09 by Simon Forsyth
It is indeed a BBC Micro.. coupled with the UMI 4M sequencing system. they used this for many years(until Violator I believe). Alan didn t use the MC50.. and
Sad, but I have to put my EIIs up for sale
2012-09-09 by timothymoney
Emotionally devistating, but due to medical bills... my EII+HD and EII are on EBAY. I guess I ll find out if they are still as I think they are. If you know
Re: [emulatorII-list] Re: loading Mirage samples into DPX-1
2012-09-04 by Nick Zampiello
awesome, i m impressed SDII was even accurate. Alchemy always sounded better while doing DSP but i suppose that the SDII isn t doing any math so it should be
Re: loading Mirage samples into DPX-1
2012-09-04 by Robert
Yes, the bottom four are still empty. :) I m so impressed by the Mirage sample sound transformation that I had to verify. I ported an 8-bit Mirage sample
Re: Sampling Noise Problem?
2012-09-02 by dykesh666
Tyler, Thanks for the reply. The noise floor I had originally was only about 50db so I did have quite a bit of noise. I have cleaned the input jack with
Re: WTB: One or two disks to test an EII
2012-08-29 by its_peake
Thank you everyone! :) -Mike
RE: [emulatorII-list] Re: WTB: One or two disks to test an EII
2012-08-27 by carl schmidt
Sorry. I wasn t trying to gouge anyone, and I hadn t meant to send that to the whole list. The only source I could find (northstar) were $20 a pop! You re
Re: WTB: One or two disks to test an EII
2012-08-27 by JMP
You ve got to be joking... $25 for copying three library 5.25 disks ! That s hardly in the EII community spirit. The two looking for disks, pay the postage
RE: [emulatorII-list] Re: WTB: One or two disks to test an EII
2012-08-27 by carl schmidt
Hi, I ve got a some doubles i can sell. They d be $10 a pop, 3 for $25 shipping included in the US. Let me know if there s any particular sounds your after,
Re: WTB: One or two disks to test an EII
2012-08-27 by bbassville
Hi , i am in the same situation , i m looking for one or two diskettes for testing my emulator 2 Thanks you alls Peace
WTB: One or two disks to test an EII
2012-08-27 by its_peake
Hi, I have one of these beauts stuffed away due to my living situation and I ve never had an opportunity to test it. I m looking to purchase one or two
Re: [emulatorII-list] Sampling Noise Problem?
2012-08-27 by Tyler Burns
Dykesh - What kind of noise floor are we talking, here? At 0db on the Gain setting, I m guessing that noise floor should be about -80dBu or -85dBu, which
e-mu done
2012-08-27 by James Ulibarri
anyone catch the * *In the Loop - Art & Technology - Episode 8 EMU Systems video? it s $5 to download it. there was some interesting history there. when the
Sampling Noise Problem?
2012-08-26 by dykesh666
I am trying to sample for the first time with my Emulator II and I have some questions. When sampling with the Gain set to 0, I hear a good bit of background
Re: [emulatorII-list] Re: loading Mirage samples into DPX-1
2012-08-26 by Nick Zampiello
its truly amazing how much that device makes the old mirage samples shine. but i don t think it s the 8 to 12 bits though as the bottom 4 are still empty
Re: loading Mirage samples into DPX-1
2012-08-25 by Robert
Just an update, got the floppy drive to work, had to tap on the case a bit, there was something stuck inside. It seems fine now, will still probably try to
Re: loading Mirage samples into DPX-1
2012-08-23 by Robert
I figured out how to make a classic Mirage sample disk in standard OS3.2, and that doesn t load, so I seem to have 3 1/2 floppy issues to look at. Guess I ll
Emulator II Manual
2012-08-22 by Tyler Burns
Has anyone else had trouble with printing the Emulator II manual? I downloaded the one from Cyborgstudio.com (top Google result for Emulator II Manual ) and
Re: [emulatorII-list] Disk Formatting Question
2012-08-22 by Nick Zampiello
i don t have an EiiHD. i just figured it was the first place to look. what does the manual say it wants to see? i know the DPX wants DD and will not see
Re: [emulatorII-list] loading Mirage samples into DPX-1
2012-08-22 by Nick Zampiello
i loaded all of my factory and personal mirage disks onto the DPX just fine. aren t all mirage disks formatted in masos from the formatting diskette? sorry
loading Mirage samples into DPX-1
2012-08-22 by Robert
I just got a DPX-1. I also have samples created on a Mirage using MASOS. In the DPX-1 manual version 1.0 it says that samples created under MASOS cannot be
Re: [emulatorII-list] Disk Formatting Question
2012-08-22 by Tyler Burns
Nick - It says it s a double-sided, double-density disk. Is there a particular brand I should be buying these days? Tyler ... From: Nick Zampiello
Re: [emulatorII-list] Disk Formatting Question
2012-08-22 by Nick Zampiello
are you using the right kind of disk? many old samplers are very sensitive to SD/DD/HD disk types. z NEW ALLIANCE EAST!!!! ... New Alliance East -
Disk Formatting Question
2012-08-22 by Tyler Burns
Hi - I have an EII+HD with one floppy drive. When I try to format a blank floppy the machine says, Use Floppy Sftwe & Erase Mem? Y/N. I press YES and
Emu II dimensions
2012-08-21 by John
Does anyone know or have the case dimensions? I m drawing up the case in Illustrator as blue prints for a new project and I cannot find the case dimensions.