Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Thread

SCSI plug

SCSI plug

2014-07-04 by monsieur escargot

Hi
Does it matter if the SCSI plug is DB25 or DB50 for installing a PCD-60 card reader externally? finally found an external enclosure for it, but it is DB50.

thanks!
dave


--
Monsieur E.
dave at mamakuproject dot com
mamakuproject dot com
youtube dot com/mamakuproject
NZ:+64 (0)273214581
France: +33 (0)675322709

HAVE YOU FOUND/LIKED MAMAKU PROJECT ON FACEBOOK YET?

Re: [emax] SCSI plug

2014-07-04 by Ted Summers

There are all kinds of cables and adapters which allow going from DB25 to 50pin or 68 pin.

look at computer sites or ebay.

On Jul 3, 2014, at 7:00 PM, ''monsieur escargot'' dave@... [emax] wrote:


Hi
Does it matter if the SCSI plug is DB25 or DB50 for installing a PCD-60 card reader externally? finally found an external enclosure for it, but it is DB50.

thanks!
dave


--
Monsieur E.
dave at mamakuproject dot com
mamakuproject dot com
youtube dot com/mamakuproject
NZ:+64 (0)273214581
France: +33 (0)675322709

HAVE YOU FOUND/LIKED MAMAKU PROJECT ON FACEBOOK YET?


Re: [emax] SCSI plug

2014-07-07 by monsieur escargot

adaptors yes, but is it ok to actually install a different plug on the emax back panel than the original DB25? I have DB50 plugs on PCB with adaptors to the grey ribbon cable part of the SCSI kit. So basically my question is, is it the same information going thru DB50 and DB25? will the SCSI kit read infos ok coming from DB50 plugs and cable? My guess is yes, on DB25 speed.

thanks
Show quoted textHide quoted text
On Fri, Jul 4, 2014 at 8:36 PM, Ted Summers djtbs1@... [emax] <emax@yahoogroups.com> wrote:

There are all kinds of cables and adapters which allow going from DB25 to 50pin or 68 pin.


look at computer sites or ebay.

On Jul 3, 2014, at 7:00 PM, ''monsieur escargot'' dave@... [emax] wrote:


Hi
Does it matter if the SCSI plug is DB25 or DB50 for installing a PCD-60 card reader externally? finally found an external enclosure for it, but it is DB50.

thanks!
dave


--
Monsieur E.
dave at mamakuproject dot com
mamakuproject dot com
youtube dot com/mamakuproject
NZ:+64 (0)273214581
France: +33 (0)675322709

HAVE YOU FOUND/LIKED MAMAKU PROJECT ON FACEBOOK YET?





--
Monsieur E.
dave at mamakuproject dot com
mamakuproject dot com
youtube dot com/mamakuproject
NZ:+64 (0)273214581
France: +33 (0)675322709

HAVE YOU FOUND/LIKED MAMAKU PROJECT ON FACEBOOK YET?

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.