Emax

I order the Teensy boards directly from PJRC.com (original source). They are only 16 USD (13 EUR).
My local electronics shop in town is providing the UA963xxx RS422 drivers/receivers ICs (I don't know their supplier).
For most other components (resistors, caps, leds, print boards, connectors, wires, case, ...) I'm using Conrad.

I hope this helps to keep costs under control ;)

///E-Synthesist  


--- In emax@yahoogroups.com, "freddy1771994" <freddy1771994@...> wrote:
>
> That's fairly cheap, because the teensy board itself costs 25euros (on german ebay). And the rest has mainly to be imported. 
> Where do you order your parts? Maybe I did just bad research.
> 
> Thank you very much!
> Freddy
> 
> 
> --- In emax@yahoogroups.com, "esynthesist" <esynthesist@> wrote:
> >
> > Thanks.
> > The cost for EmuSer parts slightly depends on the supplier; but especially the parts shipping costs can be annoying (not many suppliers can provide all parts, so typically multiple shipments are involved). 
> > I would say between 30 and 40 EUR.
> > The time to build the thing should not be under-estimated (hours !), especially due to the required mechanical processing of the case and the print board. Building it on an experimental board can be done very fast ;)
> > 
> > Regarding new stuff for the Emax, I haven't planned a lot.
> > Nothing at the hardware side. On the software side, EMXP v2.12 will contain bank construction functions for all supported samplers including Emax-I and Emax-II (current version v2.11 only supports construction of Emulator-I banks). Probably also full floppy disk images will be supported (besides EMX, EM1, EM2 files). And there will be some enhancements in the conversion engine for the Emax-I and Emax-II.
> > EMXP v2.12 will contain some other new features, but these will not be unique for Emax samplers ;)
> > 
> > ///E-Synthesist
> > 
> > 
> > 
> > --- In emax@yahoogroups.com, "freddy1771994" <freddy1771994@> wrote:
> > >
> > > Hi Kris,
> > > 
> > > just want to ask the expert. How much do you think do the emuser parts cost all in all?
> > > 
> > > I'm wondering if you have any exciting new emax related hardware or software (updates...) plans? 
> > > 
> > > And furthermore I just want to thank you for all your work concerning the emax (emxp...). You really keep the instrument alive!
> > >
> >
>