Emax

I have to say I just checked this project out on youtube and its pretty
impressive.
On Jul 11, 2012 2:26 PM, "freddy1771994" <freddy1771994@...> wrote:

> **
>
>
> That's fairly cheap, because the teensy board itself costs 25euros (on
> german ebay). And the rest has mainly to be imported.
> Where do you order your parts? Maybe I did just bad research.
>
> Thank you very much!
> Freddy
>
> --- In emax@yahoogroups.com, "esynthesist" <esynthesist@...> wrote:
> >
> > Thanks.
> > The cost for EmuSer parts slightly depends on the supplier; but
> especially the parts shipping costs can be annoying (not many suppliers can
> provide all parts, so typically multiple shipments are involved).
> > I would say between 30 and 40 EUR.
> > The time to build the thing should not be under-estimated (hours !),
> especially due to the required mechanical processing of the case and the
> print board. Building it on an experimental board can be done very fast ;)
> >
> > Regarding new stuff for the Emax, I haven't planned a lot.
> > Nothing at the hardware side. On the software side, EMXP v2.12 will
> contain bank construction functions for all supported samplers including
> Emax-I and Emax-II (current version v2.11 only supports construction of
> Emulator-I banks). Probably also full floppy disk images will be supported
> (besides EMX, EM1, EM2 files). And there will be some enhancements in the
> conversion engine for the Emax-I and Emax-II.
> > EMXP v2.12 will contain some other new features, but these will not be
> unique for Emax samplers ;)
> >
> > ///E-Synthesist
> >
> >
> >
> > --- In emax@yahoogroups.com, "freddy1771994" <freddy1771994@> wrote:
> > >
> > > Hi Kris,
> > >
> > > just want to ask the expert. How much do you think do the emuser parts
> cost all in all?
> > >
> > > I'm wondering if you have any exciting new emax related hardware or
> software (updates...) plans?
> > >
> > > And furthermore I just want to thank you for all your work concerning
> the emax (emxp...). You really keep the instrument alive!
> > >
> >
>
>  
>


[Non-text portions of this message have been removed]