Emax

Ted again thanks :-)
I know a friend who could do this for me in Paris.
But where can i buy this kit? Also that scsi that is not recognised either internal or external HD/CD what could this be?
Can this be fixed as well with a simple chip replacement/resistor soldering/removal ?
Dear emax friends, are some of you ok to sell one of those kits to me?
By the way any chances that one of you could sell me an expansion board? ;-)


Envoyé de mon iPhone

> Le 7 juin 2014 à 08:32, "Ted Summers djtbs1@... [emax]" <emax@yahoogroups.com> a écrit :
> 
> If you print out the upgrade instructions and take the kit to any decent electronics repair shop, they should be able to do it for you.
> It takes me about 35 minutes to complete the modifications to the board, and another 10 minutes or so to test it out and verify it's working. So figure labor would likely be 1 hour - 1.5 hours at the shop rate.
> 
> I expect you would probably have to take a SCSI drive with you so they could test it.... or if your local university has electronics courses, you might find a student that would be interested to do it for you as a project, since they gain practical experience...
> 
> -Ted
> 
> 
>> On Fri, Jun 6, 2014 at 11:24 PM, sweetsynthchuck@... [emax] <emax@yahoogroups.com> wrote:
>>  
>> buying the kit is simple finding someone that can install it is a different question.
>> 
>> any one in europe fit these kits?
>> 
>> if so much is the going rate?
>> 
> 
>