Re: candelas?
2015-01-25 by billhansen2008@...
Using Spyder 4.0.2, calibrating the monitor to 121 cd/m^2 (and yes, I got the number right this time), my prints from an Epson 1430 printer are still too dark,
Messages
Browse messages
Page 3 of 112 · 5574 messages matched
Re: [datacolor_group] Profiling software
2015-01-24 by David Miller
... I ll look into this - I m not aware of any Javascript issues with Spyder4 software. Which version are you trying to install - have you downloaded the
Re: [datacolor_group] Profiling software
2015-01-24 by elo
all I see is this on their siteà. did you try thisà. Troubleshooter ╗ Can t start Spyder4 installation under Mac OS X 10.9.5 / 10.10 Can t start Spyder4
Re: candelas?
2015-01-22 by bill hansen
I wrote - I ll try to re-calibrate to a brightness of 60 or 80 ds/m^2. Obviously, that was a typo. I meant to write ....cd/m^2 Bill
Re: candelas?
2015-01-21 by billhansen2008@...
I think I wrote in an earlier post that the choice of brightness in my previous version of Spyder3Pro was dependent on eyeballing - choosing between a
Re: candelas?
2015-01-21 by billhansen2008@...
It was an upgrade from an earlier version of 4, and the notification of its availability came as I was beginning to re-calibrate my monitor. Bill ... Hi Bill,
Profiling software
2015-01-20 by James Lawson
I recently submitted a ticket but haven t been able to get an answer. I bought a spyder 4 Colorimeter through Integrated Color for use with their profiling
Re: candelas?
2015-01-16 by tlbtlb@...
... I would sure hope so! I figured if I spelled it out, there would be less of a chance of misunderstanding when reading quickly... -}} Terrie
Re: [datacolor_group] candelas?
2015-01-15 by David Miller
It would have been 120 cd/m2 ( one hundred twenty ), not 20 ( twenty ). :-) ... David Miller Senior Software Developer, Digital Color Solutions Datacolor
Re: candelas?
2015-01-15 by tlbtlb@...
... Are you SURE he said 20 ??? That s very, very, very DARK! Most people shoot for about 120cd/m2 (One Hundred Twenty cd/m2 --not Twenty). There is a section
Re: candelas?
2015-01-14 by exe.rpd@...
Hi Bill, Was the upgrade from 3 to 4 free or did you pay for the upgrade???? I assume you had to pay. Thanks! Bruce
Re: candelas?
2015-01-14 by bill hansen
Several hours after I wrote my initial post to this thread, Spyder3Pro had an update to version 4, which does allow adjustment to specific candela levels. I ve
Re: candelas?
2015-01-14 by Tanel Kindsigo
Hi, Spyder3Pro should actually let you choose the target brightness before calibrating. Don t remember what the default is, but I tend to use 180cd/m2. 20 is
candelas?
2015-01-13 by billhansen2008@...
Is there a way to measure the brightness of a monitor in candelas, using the Spyder3Pro ? I recently had a professional printer profile made by a well
Re: [datacolor_group] Coming back to Spyder Print, I've forgotten -
2014-12-11 by jvlist@...
Just wanted to wish you the best C. David Tobie on your new endeavors. I ve known you for over 15 years and you ve always have been a pleasure to talk with!
Re: [datacolor_group] Coming back to Spyder Print, I've forgotten -
2014-12-10 by David Miller
Bill, The most likely problem is that you printed the target incorrectly. When that happens, no matter what you do afterwards, nothing will give you good
Re: [datacolor_group] Coming back to Spyder Print, I've forgotten -
2014-12-10 by billhansen2008@...
CD - Many thanks for your reply. Stumbling around, I discovered what I was doing incorrectly, and I think I m okay now, and the target is okay too. When I did
Re: [datacolor_group] Coming back to Spyder Print, I've forgotten -
2014-12-10 by Cdtobie
Hi Bill, I am no longer with Datacolor, so won t be monitoring this list for questions. But saving edits is not the best approach here. You are most likely
Coming back to Spyder Print, I've forgotten -
2014-12-09 by billhansen2008@...
I ve been away from Spyder Print 3 for quite a few months. Today I made my first try at a printer profile using SpyderPRINT version 4.2.3 library veriosn 185.
Re: [datacolor_group] Lightroom Flickering
2014-08-26 by debalbe@...
It actually made the problem much worse. I have now set the profile to PhotoPro since that seems to make the problem better. Will that be ok with my Spyder?
Re: [datacolor_group] Lightroom Flickering
2014-08-26 by Cdtobie
They are recommending that you set sRGB as your display profile? That will trash your color management. It might be a valid test to see if your display profile
Re: Yellow Tint on my Dell Inspirion 17 r
2014-08-25 by Aworkofmarc
I was having major problems getting my brand new, but cheapo monitor (Viewsonic 2730) calibrated too.... and I sent many a angry email to their tech support.
Lightroom Flickering
2014-08-25 by debalbe@...
I am having issues with Lightroom flickering and Adobe advised me to change my profile to sRGB IEC61966-2.1 ; how will this affect the color management with
Yellow Tint on my Dell Inspirion 17 r
2014-08-24 by darkuser089@...
Hi :) i have a little problem. I bought a Spyder 4 Pro and try to calibrate my LCD Monitor and my Laptop. The LCD Monitor calibration went well but on my Dell
Re: Newbie Issues.
2014-08-21 by Marc Whittemore
LOL. NOT really. I went a couple rounds with their tech support and then promptly got what amount to the kiss off with the message: In the end, all this
Re: [datacolor_group] Newbie Issues.
2014-08-16 by C D Tobie
This is exactly the type of situation that Datacolor Support is excellent at working out. Please go to
Newbie Issues.
2014-08-16 by idesofmarc@...
So.. just got my Spyder4 elite. Nothing seems to work right.... for example when I tried to calibrate my secondary monitor Viewsonic mh2703 I get to the screen
Wonkyness Abounds
2014-08-16 by idesofmarc@...
So.. just got my Spyder4 elite. Nothing seems to work right.... for example when I tried to calibrate my secondary monitor Viewsonic mh2703 I get to the screen
Re: [datacolor_group] Eizo FlexScan S2000 calibration
2014-07-25 by oneoneone8
Thank you for answer! I ll use those settings then. Regards, Mika ... On Sun, 7/20/14, Cdtobie CDTobie@aol.com [datacolor_group]
Re: [datacolor_group] Eizo FlexScan S2000 calibration
2014-07-20 by Cdtobie
This model was released in 2006, long before Eizo moved away from CCFL backlights. So it would be wide gamut, CCFL backlight. C. David Tobie Imaging Product &
Eizo FlexScan S2000 calibration
2014-07-20 by m_rev2@...
Hi I m trying to calibrate Eizo flexScan S2000 with Spyder4Elite, but need to know what to choose in Gamut and Backlight options. I googled a lot, but couldn t
Eizo FlexScan S2000 calibration
2014-07-20 by oneoneone8
Hi I m trying to calibrate Eizo FlexScan S2000 with Spyder4Elite, but need to know what to choose in Gamut and Backlight options. I googled a lot, but couldn t
Re: Problem with the Spyder's colour profile
2014-07-12 by tlbtlb@...
... Then, it seems to me that you need to look into the differences between Lightroom and Photoshop with respect to both color management and your settings...
Re: Problem with the Spyder's colour profile
2014-07-07 by lisamarie.savard@...
Yes, you are correct. Photos from Lightroom look fine, but not from Photoshop. I saved them for web using the four available presets and the result it always
Re: Problem with the Spyder's colour profile
2014-07-07 by tlbtlb@...
... But...if I m remembering correctly, you said that if you process it only in Lightroom when you upload to web/social media the image looks ok? If that is
Re: Problem with the Spyder's colour profile
2014-07-07 by lisamarie.savard@...
Thank you both for your answers! @ David: You got it right. The less saturated photo (titled 2.JPG) is the wrong version and it s how it appears in some
Re: Problem with the Spyder's colour profile
2014-07-05 by tlbtlb@...
... save it. That s what I was getting at when I asked what the settings were for the Save As options--although I have CS6, I ve never actually gotten around
Re: [datacolor_group] Problem with the Spyder's colour profile
2014-07-05 by David Miller
... I think your problem is this: - When you re editing your images on your calibrated display, you re doing so inside of color managed applications -
Re: Problem with the Spyder's colour profile
2014-07-04 by lisamarie.savard@...
I haven t changed anything to my photo-saving routine in the past months, that s why I m so puzzled. I always use Save as... , then save them as JPGs or
Re: Problem with the Spyder's colour profile
2014-07-04 by tlbtlb@...
I don t think this is a Spyder/calibration problem. It may perhaps be a Photoshop problem--what are your settings for Saving an image--or something to do with
Re: Problem with the Spyder's colour profile
2014-07-04 by lisamarie.savard@...
Oops, sorry about that. I changed the privacy setting, but here they are again if you can t have access to them. My working space is already sRGB. Could it be
Re: [datacolor_group] Problem with the Spyder's colour profile
2014-07-04 by David Miller
Those photos on your Flickr page can t be viewed, due to permissions problems. In Photoshop s Color Settings dialog (can t know for sure since I can t view the
Problem with the Spyder's colour profile
2014-07-04 by lisamarie.savard@...
Hello, I got a Spyder4Pro last December. I ve never had a problem with it, until a few weeks ago when I ran my monthly fullcal. Here is an example to
Re: [datacolor_group] Is this group still alive?
2014-07-01 by Peter Marquis-Kyle
On 1/07/2014 10:00 PM, David Miller dm2363@optonline.net ... Thanks David My issue concerns a Windows 7 PC with dual monitors and Spyder3Elite. It
Re: [datacolor_group] Is this group still alive?
2014-07-01 by dwaynepippin@yahoo.com
The onlyvissue I had was when I recalibrated my monitor. It would save the new info. Found out I have to run it as administrator even tho I am the only user on
Re: [datacolor_group] Is this group still alive?
2014-07-01 by jvlist@...
Yep still alive.... seems like there are no issues with Datacolor products.
Re: [datacolor_group] Is this group still alive?
2014-07-01 by dwaynepippin@yahoo.com
Ya im on here. lol Sent from Yahoo Mail on Android
Re: [datacolor_group] Is this group still alive?
2014-07-01 by David Miller
Hi Peter: We always monitor the list - it s just been quiet. What s going on? Tech support should normally be able to answer your questions, but if it s not
Re: Is this group still alive?
2014-07-01 by ladonna.at.momndads@...
Rather than starting a new discussion, I d first post here. Then everybody who is still following this discussion (like me) will get an email about it (like I
Is this group still alive?
2014-07-01 by Peter Marquis-Kyle
There has been very little traffic on this list lately. I am just posting this to check whether it is worthwhile starting a discussion here.... I have been