Re: Spyder 3 Print
2017-12-02 by JN2@...
... On the contrary -- upgrading from Windows XP is the best way to solve the OP problem, in part because it kills another important bird with the same stone.
Messages
Browse messages
Page 1 of 112 · 5574 messages matched
Re: Spyder 3 Print
2017-12-02 by tlbtlb@...
Late to the party as usual but... -}} ... Not very useful advice and essentially pointless as it doesn t answer the user M Cook s question. M Cook...I d
Re: Spyder 3 Print
2017-11-06 by JN2@...
You should not be using Windows XP. It s a security disaster.
Spyder 3 Print
2017-11-06 by M Cook
I am using Spyder 3 Print with Windows XP. The program suggests that I update to version 5.0.2. Would this version work with XP please, or should I stay
Re: [datacolor_group] Green tint appear on my screen after calibrating with Spyder5pro
2017-10-02 by David Miller
Please contact Support at the Datacolor website, and open a support ticket for this. Best regards, David Miller Manager/Lead Developer, Consumer Software
Re: Green tint appear on my screen after calibrating with Spyder5pro
2017-10-01 by JN2@...
Computer (make and model)? Monitor (make and model)? Operating system (including version)? Did you warm up the monitor before calibration? Were there any error
Green tint appear on my screen after calibrating with Spyder5pro
2017-09-30 by jctalk18@...
Dear Admin/ Tech support, As above subject, my screen appear greenish after I ve done the calibration.I had set everything to default on my display but to no
Re: [datacolor_group] Spyder 4 Express calibration WAY off
2017-06-25 by David Miller
... I’ll check about that with support tomorrow (Monday). Thanks for the heads-up! On Jun 25, 2017, at 10:40 AM, JN2@navasgroup.com [datacolor_group]
Re: [datacolor_group] Spyder 4 Express calibration WAY off
2017-06-25 by JN2@...
With respect, David, I reported the same software problem with my Spyder 3 Express in May 2016. Ticket ZGE-837-67242.
Re: [datacolor_group] Spyder 4 Express calibration WAY off
2017-06-25 by David Miller
... I’m not aware of any issues with Spyder4Express software freezing. The last software update we did on it, in February 2016 (version 4.5.9) is the latest,
Re: Spyder 4 Express calibration WAY off
2017-06-25 by JN2@...
Same thing happened with my Spyder 3 Express. Turned out to be hardware failure. Is yours still under warranty? Mine wasn t, so I replaced it with a 4 Express,
Spyder 4 Express calibration WAY off
2017-06-24 by ericpedersenphotography@...
I have a spyder 4 express, I used it recently to calibrate my laptop screen (Sony svs15), the color came out way off, it s extremely pink. I ve tried redoing
Re: [datacolor_group] Re: SpyderUtility preferences
2017-03-05 by JN2@...
[Apology for repost, but mangling by Yahoo makes it a necessity.] @David Miller Yes, it’s needed. For “+” users who have the new software upgrade (Pro+,
Re: [datacolor_group] SpyderUtility preferences
2017-03-04 by lcunning@...
First, thank you for the detailed and very helpful response, this is exactly what I was hoping for when I posted my questions. Regarding the Load Video Card
Re: [datacolor_group] SpyderUtility preferences
2017-03-04 by David Miller
... This will be for any dialogs that SpyderUtility might put up on the screen, while it’s running. (Display recalibration alert, for example). The idea is
Re: [datacolor_group] Re: SpyderUtility preferences
2017-03-04 by David Miller
... Yes, it’s needed. For “+” users who have the new software upgrade (Pro+, Elite+) which has the new Room Light Switching feature: if you use that
Re: SpyderUtility preferences
2017-03-04 by JN2@...
None of that is true. Your questions likewise make assumptions that aren t true. And you don t seem willing to listen. That said, when you re not willing to at
Re: SpyderUtility preferences
2017-03-04 by lcunning@...
I m more than happy, and thankful, to accept free advice when it at least attempts to address the question I m asking. No one even tried to respond to my
Re: SpyderUtility preferences
2017-03-04 by JN2@...
You should always take unauthenticated advice with a grain of salt. Your best option is to open a Support Ticket. And i suggest you be less critical of free
Re: SpyderUtility preferences
2017-03-04 by lcunning@...
I was informed, in that photography forum, that Datacolor people are actively involved in this group. The poster specifically stated that I could get answers
Re: SpyderUtility preferences
2017-03-04 by JN2@...
With that attitude, probably just as well, and you re asking detailed questions that only Datacolor people can really handle in any event.
Re: SpyderUtility preferences
2017-03-04 by lcunning@...
Thanks for the suggestion, but I prefer to restrict my trouble ticket submissions to actual problems. I m not having any problems, I m seeking basic knowledge
Re: SpyderUtility preferences
2017-03-04 by JN2@...
Open a Support Ticket here http://support.datacolor.com/index.php?/Tickets/Submit.
Re: SpyderUtility preferences
2017-03-04 by Larry Cunningham
Anybody able to address my actual questions? Please? Larry
Re: SpyderUtility preferences
2017-03-04 by JN2@...
That s your choice, but the Datacolor utility is not a panacea. In fact, it can be part of the problem rather than the solution, fighting with other software,
Re: SpyderUtility preferences
2017-03-03 by lcunning@...
It would appear that I ve stumbled into a pre-existing and ongoing disagreement about using SpyderUtility and using a screensaver, which wasn t my intention.
Re: [datacolor_group] SpyderUtility preferences
2017-03-03 by C. David Tobie
... Perhaps, but with LCD displays, screensavers don’t actually save your screen, the same wear and tear is occurring whenever they are on. So putting the
Re: [datacolor_group] SpyderUtility preferences
2017-03-03 by JN2@...
With respect, that s wildly exaggerated FUD. I ve profiled a great many Windows machines without any 3rd party utilities without issues. All it takes is proper
Re: [datacolor_group] SpyderUtility preferences
2017-03-03 by C. David Tobie
... That depends on how you define “needed”. If you mean that there is an OS level functionality in both Mac and Windows these days which can, if properly
Re: SpyderUtility preferences
2017-03-03 by JN2@...
Despite what Datacolor will tell you, the Datacolor utility is not needed. See http://tips.navas.us/2016/05/windows-monitor-calibration-issue.html
SpyderUtility preferences
2017-03-03 by lcunning@...
I purchased and installed Spyder5Pro earlier this week, and used it to calibrate both Dell monitors in a dual-monitor system (Windows 10 in case it makes any
Re: the data from the profile was not loaded into the video card
2017-02-26 by jvlist@...
Tell us more about your computer! What OS and graphics card? Thanks, John
the data from the profile was not loaded into the video card
2017-02-26 by pg@...
SpyderPro5 has suddenly begun to inform me that data from profile NOT loaded into video card when I calibrate. What could be the reason?
Re: [datacolor_group] Dual Monitor Color Corruption
2017-02-17 by JN2@...
Windows can be made to load color profiles properly without a 3rd-party application, as demonstrated by my own Lenovo ThinkPad running Windows 8.1 x64, if
Re: [datacolor_group] Dual Monitor Color Corruption
2017-02-17 by David Miller
... I have a guess. If you’ve disabled SpyderUtility from running, then yes, the calibration tables from your profiles won’t be loaded into the video card
Dual Monitor Color Corruption
2017-02-17 by finephotographics@...
All the sudden with no changes to Spyder profiles I m having issues with color on two monitor setup. Display 1 Dell laptop wide gamut laptop monitor. Has blue
Re: video on laptop
2016-12-22 by Randy Gentry
What operating system are you using? If we know what the OS is we can go from there. Aloha from Maui
video on laptop
2016-12-22 by billhansen2008@...
I ve never used a computer to take video of myself, but it looks like I m going to have to learn how to do that. I ve recently signed up for an art course
Re: [datacolor_group] Dull colours after installing spyder pro 5 onto iMac,
2016-11-29 by David Miller
... Ok, so then that’s a completely different issue, and doesn’t have anything to do with Spyder5Pro itself or display calibration. What you’re
Re: [datacolor_group] Dull colours after installing spyder pro 5 onto iMac,
2016-11-21 by roland randall
Thanks , I will try that and see how it compares to present results ... On Saturday, 19 November 2016, 16:47, David Miller dm2363@optonline.net
Re: [datacolor_group] Dull colours after installing spyder pro 5 onto iMac,
2016-11-21 by roland randall
Hi , The display is good , its just printing with a canon pro 100 I cannot get vibrant colours at all.... On Saturday, 19 November 2016, 16:47, David Miller
Re: Dull colours after installing spyder pro 5 onto iMac,
2016-11-20 by daniel_v@...
Did you find a solution to your problem? Most peoples don t know but there is a software calibration function in the System Prefs monitor under OS X. This is a
Re: [datacolor_group] Dull colours after installing spyder pro 5 onto iMac,
2016-11-19 by David Miller
... I’d asked, but it’s impossible to follow up on the original question any further, without understanding what the question was really about. Was it
Re: [datacolor_group] Dull colours after installing spyder pro 5 onto iMac,
2016-11-03 by James Holtzman
Does it print with dull colors or only on the display? Sent from my Verizon 4G LTE Droid On Nov 3, 2016 12:32 PM, David Miller dm2363@optonline.net
Re: [datacolor_group] Dull colours after installing spyder pro 5 onto iMac,
2016-11-03 by David Miller
... Hi Ron: Which version of software have you installed? (Should be 5.1, which is the latest and which we released at the beginning of September). I can
Re: Dull colours after installing spyder pro 5 onto iMac,
2016-11-03 by dannie.says@...
Try another calibration software, and see if you get similar results. If you want true and accurate colors, they may not be as vibrant as you re used to.
Dull colours after installing spyder pro 5 onto iMac,
2016-11-03 by strawberryvale2001@...
Hi , I have just Installed spyder pro 5 on my iMac but am finding the colours much worse than before installing they are flat dull and not as vibrant pre
that's really amazing
2016-10-12 by geoff
Hello, I ve been looking for some nice stuff and have come across those amazing things, just take a look Very truly yours,
Re: Keep Datacolor software installed?
2016-05-14 by JN2@...
Thanks to both of you, but with additional research, I now know (a) what was going on and (b) how to fix it: Windows can be made to load the LUT without any
Re: Keep Datacolor software installed?
2016-05-13 by lisamarie.savard@...
As far as I know, you should keep the software. On my computers, that s what loads the right colour profile when my computer starts up.