Yahoo Groups archive
Messages
Page 24 of 168 · 8362 messages matched
2009-08-19 by Colin Fraser
> In one of your posts in this thread you mention a P3 OSv4.5, > which leads me to ask (again) if and when a finalised, > non-beta version of the v4 OS for the P3 will be available.. We could just call the current v4.0 a release version. Does that help ? ;-) There is a 4.5 beta.
2009-08-18 by ch.³l
hi Colin, I only just saw the Cirklon prototype vid.. nice work! In one of your posts in this thread you mention a P3 OSv4.5, which leads me to ask (again) if and when a finalised, non-beta version of the v4 OS for the P3 will be available.. grtz, Chiel
2009-08-06 by hell_mat
Still available? price? --- In analogue-sequencer@yahoogroups.com, "ringmod45" wrote: > > > > Hi Everyone, > > I have a mint factory made for sale. Pix and references available, thanks. > > Regards, > RM >
2009-08-05 by Miguel Mendoza
Yes, sometimes it happens... You'll have to buy a display kit to Colin and replace it, not too painfull though... Regards! ----- Original Message ----- From: mikesonic77 To: analogue-sequencer@yahoogroups.com Sent: Thursday, August 06, 2009 12:59 AM Subject: [analogue-sequencer]
2009-08-05 by mikesonic77
hi eeveryone i didn't used my p3 for a year and a half. today we wanted to make fun session and after switching on the p3 every lamp is greeting me, but no display. the display is only black does anybody know any help? thanks mike
2009-08-03 by ringmod45
Hi Everyone, I have a mint factory made for sale. Pix and references available, thanks. Regards, RM
2009-07-28 by srmaietta
Put my kit-built P3 in the bay. $400 starting price - basically what it cost me to get all the kit parts and stuff assembled. It does not work, once the display died I replaced with a blue/white LCD. (same color as Colin's replacements) After replacement, it would not boot up. th
2009-07-23 by Colin Fraser
> I had a look at enapas P3 kit today and noticed that he's got > an old kit with a 18MHz crystal. This means that the firmware > available for download will not work since it is for running > the AVR at 24MHz as far as i know. No, the later CPUs at 24MHz have a different bootloa
2009-07-23 by quasifzet
I had a look at enapas P3 kit today and noticed that he's got an old kit with a 18MHz crystal. This means that the firmware available for download will not work since it is for running the AVR at 24MHz as far as i know. The problem is that it will only run the first step in every
2009-07-23 by Colin Fraser
> Thanks for replying and sorry for not looking at the recent > posts before posting! Just wanted to add that I'd also be > very interested in native CV / gate processing. Native CV is a no-brainer, since the CPU has internal 12 bit ADCs and DACs. Best regards, Colin Fraser Seque
2009-07-23 by Stoffel
> Before then, I may release a small number of hand-built beta test units. > I'll be working out what sort of price they would need to sell for shortly. Me want, me want!!!! Just because i didn't write so much anymore in this newsgroup I'm still reading it. And I still use the P3
2009-07-23 by kkonkkrete
Thanks for replying and sorry for not looking at the recent posts before posting! Just wanted to add that I'd also be very interested in native CV / gate processing. --- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > Saw the pic from SDIY UK on Matrixsynth a
2009-07-22 by Colin Fraser
> Tryed transfer the bootloader, and the P3 says Bad data! This means? > > Tryed diffrent midiinterfaces and programs, on my mac. There are a couple of common causes of bad data. First is that there is not enough gap between sysex blocks. There should be somewhere you can configu
2009-07-22 by Colin f
> I finished most of my kit, it boots and when i not hold down > run it just flickers and when i hold play it delivers > din-sync but i can do much more. Will get it checked up > tomorow, anything speciall to look up? First thing to do is a power-on initialise. Hold F1 + step key
2009-07-22 by enapaenapa
Tryed transfer the bootloader, and the P3 says Bad data! This means? Tryed diffrent midiinterfaces and programs, on my mac. /enapa --- In analogue-sequencer@yahoogroups.com, "enapaenapa" wrote: > > Hello! > > I finished most of my kit, it boots and when i not hold down run it jus
2009-07-22 by enapaenapa
Hello! Just initialised it and it works now! Will update the os now, thnx!! /enapa --- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > > > > I finished most of my kit, it boots and when i not hold down > > run it just flickers and when i hold play it delivers > > din-sy
2009-07-22 by Richard Scott
we're waiting like vultures colin :) Richard -- I am using the free version of SPAMfighter. We are a community of 6 million users fighting spam. SPAMfighter has removed 1253 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len The Professional
2009-07-22 by Colin Fraser
> Saw the pic from SDIY UK on Matrixsynth and wondered if > there's any more news on the Cirklon? There's no fixed release date yet. I need to do the production PCB and case designs, and get the firmware a bit further on. Before then, I may release a small number of hand-built be
2009-07-22 by enapaenapa
Hello! I finished most of my kit, it boots and when i not hold down run it just flickers and when i hold play it delivers din-sync but i can do much more. Will get it checked up tomorow, anything speciall to look up? I assembled most boards exept mainboard, and i think i got em r
2009-07-22 by kkonkkrete
Saw the pic from SDIY UK on Matrixsynth and wondered if there's any more news on the Cirklon?
2009-07-15 by Andy Wilson
Hi Dave, Probably from about 10:00 onwards. depends whenever Neil Johnson unlocks the door. If you arrive earlier then check out the breakfast room in J8 of Robinson College. You'll find some bleary-eyed Synth geeks munching tea & toast. See you there. Andy On 14 Jul 2009 at 18:4
2009-07-14 by em_dkj
> Hopefully it'll be a bit further on by the time I take it to Cambridge for > Synth DIY. What time do the doors open on Saturday? Dave
2009-07-08 by Jim Combs
The 2009 Creative Loafing Best of Atlanta voting has begun and anyone can vote (one ballot per email address). Please consider voting for Sensitive Chaos for Local Electronic Act. http://bestofatlanta.technomile.com/bestofatlanta.php I'm going for my third win in this category (I
2009-07-06 by Richard Scott
"so if you wanted to use them all to trigger drums, you can, but you also have the option to use them for additional CVs now that would be something! yes, a very good idea personally if I could use the sequence to sequence 8 or 16 different destinations on my modular I'd be very
2009-07-06 by jason/solvent/suctionrecords
hi, > > At the moment, nothing is final except that there will be some > native CV > output. > The CPU itself has a built-in 12 bit DAC, so it would be daft not > to at > least have 2 channels of CV/gate. i would like to request, pretty please (!), that you have at least 2 channe
2009-07-05 by Softroom
Gert van Santen wrote: > you rock, Paul :-) :) Mostly, I roll. Or lol. -- Paul --- http://www.SmokyFrog.com http://www.JointIntelligenceCommittee.com
2009-07-05 by Gert van Santen
you rock, Paul :-) -- :-) G e r t v a n S a n t e n - - - - - - - - - - - - - - - - - - - www.gertvansanten.nl
2009-07-05 by Paul Nagle
From: Jim Combs >One of my favorites so far! I especially like the mid part when you put the frosting on the cake using the V-Synth. Loverly! Cheers. Not sure it's a definitive version but each time I play this one it's substantially different. >I got a last minute gig for next S
2009-07-05 by Jim Combs
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > I've uploaded some video too... > http://www.youtube.com/watch?v=peCibFsZFbE Sweet! -Jim
2009-07-05 by Jim Combs
--- In analogue-sequencer@yahoogroups.com, Softroom wrote: > Heyup gang, another Youtube P3 doodle: > > http://www.youtube.com/watch?v=XQ1D5rqvVLY One of my favorites so far! I especially like the mid part when you put the frosting on the cake using the V-Synth. Loverly! I got a
2009-07-05 by Colin Fraser
> I'd be interested to know something about the proposed CV > functionality? > > analog drum triggers and normal CV outs as standard? how many > I wonder? At the moment, nothing is final except that there will be some native CV output. The CPU itself has a built-in 12 bit DAC, so
2009-07-05 by Colin Fraser
> Is this the prototype? (got any spares?;-) It is a prototype. The step board is likely to be final, but I may decide to alter the layout or number of keys on either side of the display. > It looks small, I expected it bigger. Guid gear gangs in sma bulk. > Those rotary encoders
2009-07-04 by Richard Scott
I'd be interested to know something about the proposed CV functionality? analog drum triggers and normal CV outs as standard? how many I wonder? Richard -- I am using the free version of SPAMfighter. We are a community of 6 million users fighting spam. SPAMfighter has removed 122
2009-07-04 by Tom Adam
Aha, This looks very cool! Is this the prototype? (got any spares?;-) It looks small, I expected it bigger. Those rotary encoders look very professional. Maybe you could post a high res pic? Do you have a current "function' list? And most important, when will it be available and
2009-07-04 by Softroom
Ditton33 wrote: > Well, it's hard not to get excited about that sneak-peek of the Cirklon. You said it bro. > But your vid is also awesome. Musically, and visually. Aw, ta. > That blissed-out change at the 4 min mark is sublime. I sorta play them different each time, hard to do o
2009-07-04 by Ditton33
Well, it's hard not to get excited about that sneak-peek of the Cirklon. But your vid is also awesome. Musically, and visually. That blissed-out change at the 4 min mark is sublime. You need to package all these together and release an album. Or is that a bit "old hat" now? :) >
2009-07-04 by Softroom
Colin Fraser wrote: > I've uploaded some video too... > http://www.youtube.com/watch?v=peCibFsZFbE LOL! I consider myself upstaged. :) -- Paul --- http://www.SmokyFrog.com http://www.JointIntelligenceCommittee.com
2009-07-04 by Richard Scott
Looks very impressive Colin very! Richard Colin Fraser wrote: > > > > I've uploaded some video too... > http://www.youtube.com/watch?v=peCibFsZFbE > > > > -----Original Message----- > > From: analogue-sequencer@yahoogroups.com > > > [mailto:analogue-sequencer@yahoogroups.com > ]
2009-07-04 by Colin Fraser
I've uploaded some video too... http://www.youtube.com/watch?v=peCibFsZFbE > -----Original Message----- > From: analogue-sequencer@yahoogroups.com > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Softroom > Sent: 04 July 2009 13:29 > To: analogue-sequencer@yahoogroups.c
2009-07-04 by Softroom
Heyup gang, another Youtube P3 doodle: http://www.youtube.com/watch?v=XQ1D5rqvVLY -- Paul --- http://www.SmokyFrog.com http://www.JointIntelligenceCommittee.com
2009-07-02 by tonylight222
Hi all I'm gonna to sell my p3 sequencer. I'm not using it so much and it's a shame. It's a kit build cpu number 2017. I've replace the oled display with a lcd one. Running v.4 software no memory expansion. I'm located in italy and for more infos and photos you can contact me at:
2009-06-21 by dab
thats my favorite signature, but sorry i dont know its name. acidmitch schrieb: > > > Hey Ya'll, > I'm trying to find out what time sig I'm in. > I start with a standard 4/4, 16 step, 1 bar pattern and then shorten > the amount of steps to 12 and change timebase to 16t. > This gi
2009-06-21 by boops.secretvibes
hi,we call this 6/8 or 12/8 if we consider triplet(a quarter :3);then you can count two bar ,or you consider sextolet in french,quarter (a beat:6)and you are two beat of sextolet...and you can call 2/24 but not usual...6/8 is the right sig, you count 123/223 also 323 423 for the
2009-06-21 by acidmitch
Hey Ya'll, I'm trying to find out what time sig I'm in. I start with a standard 4/4, 16 step, 1 bar pattern and then shorten the amount of steps to 12 and change timebase to 16t. This gives 2 beats with 6 steps each. What time sig have I changed to ?
2009-06-19 by philsmillie
Sold. Thanks for all the replies. Regards Phil
2009-06-17 by boops.secretvibes
hi,Phil ... £350 o.n.o.???also i am very interested...just need more informations about the tact switches ,if possible..best regards - In analogue-sequencer@yahoogroups.com, "philsmillie" wrote: > > DIY P3 #32 for sale.... > > http://d.yimg.com/kq/groups/9718583/sn/1669751684/nam
2009-06-17 by philsmillie
DIY P3 #32 for sale.... http://d.yimg.com/kq/groups/9718583/sn/1669751684/name/n_a N.B. needs new display fitting (display included). + another P3 kit minus CPU. N.B. CPU's no longer available and Colin has none either. :( also... Another new display plus an assortment of bits I
2009-06-04 by Softroom
duncan wrote: > so what's a "part", in v4? I'm asking on behalf of the noobs, aswell as old v3 users like me who went to v4 principally for the larger memory & who then lost the playlisting function.... You lost playlists but got multi-bar patterns with loop points. You can have
2009-06-04 by duncan
>>Probably the terminology. Chain them by holding down a range > > of part keys that will then loop round (unless you employ aux > > events to say different). You can set repeats and global bar > > lengths for each part too, as I bet you've tinkered with.
2009-06-04 by Colin f
> > I'm lost now. it may be the terminology.... how do I > > assemble parts into a larger sequence? damn, just when I > > thought I had it nailed. > > Probably the terminology. Chain them by holding down a range > of part keys that will then loop round (unless you employ aux > ev