Analogue-sequencer

> I've gone for one of the nice hammond cases, like this ;-
> http://monopole.ph.qmw.ac.uk/~thomas/synthdiy/TBbox1.htm

Those are nice looking boxes.

> no problem, the case I have is 356mm wide 216mm deep (panel area, 
not case
> depth). its 38mm high at the front and 76mm high at the back, so I 
should
> be ok..
> I may have to mount some things a little closer , but I'm sure I 
will
> survive.

That could fit if you put the keypad above the step-switches and 
pots, rather than at the side. But it might be a squeeze getting the 
LCD above the keypad, and it sort of needs to be there so that the 
soft-function keys line up with the LCD. Unless you want to run wires 
from the keypad board to the switches, then you could place them 
where ever you like.

Colin f