Analogue-sequencer

Colin,

> Good question.

I'm full of those ;-)

> The desktop case I used has a usable control panel area of about 17"  x
> 6" (430mm x 150mm).

kewl..

> means the case needs at least 1.5" (38mm)depth.

good..

> Are you thinking of doing a rack case, or desktop ?

desktop, I've gone for one of the nice hammond cases, like this ;-
http://monopole.ph.qmw.ac.uk/~thomas/synthdiy/TBbox1.htm

> It may be possible to make the case slightly narrower, as the pro
> boards are slightly smaller than the home-made boards.
> But I need to add the function selector buttons & LEDs somewhere,
> which is likely to be just to the left of the keypad - using up the
> spare width freed up by the smaller boards.

no problem, the case I have is 356mm wide 216mm deep (panel area, not case
depth). its 38mm high at the front and 76mm high at the back, so I should
be ok..
I may have to mount some things a little closer , but I'm sure I will
survive.

Thanks
Paul

P.s. let me know when you want some money (oh, and how much)