Bruford ordering a Simmons
2017-05-08 by airflamesred@...
https://www.youtube.com/watch?v=2jVjJLawhFk https://www.youtube.com/watch?v=2jVjJLawhFk
Messages
Browse messages
Page 5 of 173 · 8603 messages matched
Re: [Simmons Drums] Re: my sds9 has os v6.0
2017-05-08 by Ewan Colsell
i obviously know even less about 8031 assembly! must have mixed it up with the ensoniq mirage, which was the last synth whose schematics i had my nose in. did
Re: my sds9 has os v6.0
2017-05-07 by philmurr@...
I had a look through the code a couple of years ago when I found V6.0. Not a huge number of changes, generally timing and such like, probably to make it more
SDS1 Schematic needed
2017-05-03 by lou@...
hello out there! I have 5 SDS-1 drum units and none work properly. I ve managed to get some sounds to play on 2 of them but they appear to work differently.
Re: my sds9 has os v6.0
2017-05-01 by ewanuno@...
i have no idea what the difference is between versions though! what i can tell you is that my sds9 with os v6.0 behaves exactly as the manual describes. even
Re: [Simmons Drums] my sds9 has os v6.0
2017-05-01 by Gwyn Clarke
Thanks! Does anyone know what the differences are between OS versions, and therefore what the benefits are? Regards, Gwyn
my sds9 has os v6.0
2017-05-01 by ewanuno@...
i was just doing some work on my sds9 and i realised that i have os v6.0 this seems to be newer than anything else i can find online. v4.0 was the newest i
Trying to reassemble my TMI
2017-04-29 by hamsterdrum85@...
I finally got my Simmons TMI out of storage and I took the machine apart to sand and repaint the chassis which was pretty rusted in places. Does anyone have
perfect clock for simmons drums fans
2017-04-18 by Adam Calaitzis
http://www.newfrog.com/p/multi-function-led-digital-alarm-clock-night-light-temperature-display-200487.html?
Re: Townhouse Tom EEPROM image?
2017-04-11 by philmurr@...
Yes I have the image. Send me a message with your email address and I can send it to you
Townhouse Tom EEPROM image?
2017-04-11 by bongo2001@...
Hi everyone. I owned one of these EPROMs in the mid-80 s and used a home made circuit to generate the audio. In my experiments I damaged the chip and I ve
SV: [Simmons Drums] Re: Finally replacement 3D Printed MTM Knobs
2017-03-31 by Lars Johansson
Got mine too ! Haven´t taken them out of the bubblewrap yet. WT Från: Simmons_Drums@yahoogroups.com [mailto:Simmons_Drums@yahoogroups.com] Skickat: den 30
Re: Finally replacement 3D Printed MTM Knobs
2017-03-30 by edrose1@...
Mine arrived today and they look and work great! If you look incredibly closely you can tell they are made differently but once they re installed it s
FS: Three kit cards for the SDS-2000
2017-03-25 by jesper
Hi hexaheads! I bought those cards I mentioned but cannot find much use for them in my Simmons machines. I basically wanted to save them for some gearhead so
Re: Finally replacement 3D Printed MTM Knobs
2017-03-12 by mr_adams_beard@...
Hi Gang, Firstly a big thanks to Chris for helping with the project and trusting his one original MTM knob to the vigours of the postal system. Couldn t have
Re: [Simmons Drums] Finally replacement 3D Printed MTM Knobs
2017-03-12 by Chris Cronin
Hi guys, We ve been working on this for a couple of months now. I only had one knob on my MTM which was used as the template - but Simon did all the hard
Re: [Simmons Drums] Finally replacement 3D Printed MTM Knobs
2017-03-12 by WT
I miss a few too. Lets say I d need five ! WT
Re: [Simmons Drums] Finally replacement 3D Printed MTM Knobs
2017-03-12 by jesper
Looks nice! How much do you want for them? I miss 10 knobs on my three units... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Finally replacement 3D Printed MTM Knobs
2017-03-12 by mr_adams_beard@...
Designed some replacement MTM knobs almost a month ago now and are the latest in my line of 3D printed Simmons parts. Pictures added to the gallery.
Re: SV: [Simmons Drums] Genesis / Phil Collins Simmons rack for sale !
2017-03-10 by philip antoine karneef
FUCK ITS SOLD ALREADY???? WHYYYYYYY YGHghHhh On Fri, Mar 10, 2017 at 12:06 PM, Nick Zampiello newallianceeast@yahoo.com ... FUCK ITS SOLD ALREADY???? WHYYYYYYY
Re: SV: [Simmons Drums] Genesis / Phil Collins Simmons rack for sale !
2017-03-10 by Nick Zampiello
what does all that custom stuff do? NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S On Thursday,
SV: [Simmons Drums] Genesis / Phil Collins Simmons rack for sale !
2017-03-09 by Lars Johansson
Cool stuff ! WT Från: Simmons_Drums@yahoogroups.com [mailto:Simmons_Drums@yahoogroups.com] Skickat: den 26 februari 2017 20:10 Till:
Re : [Simmons Drums] Simmons kit cards
2017-03-07 by Jacquot.Patrice@...
It s not necessary crappy sounds (some are!!) but yes it s samples mate ;) Problem is in any case, are they still readable ? I ve got a few that I plan to
Re: [Simmons Drums] Simmons kit cards
2017-03-07 by jesper
They are: ambient, street/studio, practice and OK waveterm... message received - I will! :) /j. Den 2017-03-07 kl. 09:17, skrev Thomas Heckmann ... --
Re: [Simmons Drums] Simmons kit cards
2017-03-07 by WT
Buy them ! WT
Re: [Simmons Drums] Simmons kit cards
2017-03-07 by Thomas Heckmann
If you are into 80s gated and overproduced drums then get æem ;-) What cards are they ? IÆl check what I have laterà Thomas P. Heckmann troperecordings -
Re: [Simmons Drums] Simmons kit cards
2017-03-07 by jesper
OK, so it s those crappy kits... ;) (I used to have a Trixer II) Thing is that three cards are for sale here and I wondered if it was worth it. --
Re: [Simmons Drums] Simmons kit cards
2017-03-07 by Thomas Heckmann
Hey, I have one card for my SDS2000, but I also have the Trixer MK II that has all available cards / sets already installed. They are good and all taken from
Simmons kit cards
2017-03-07 by jesper
Hi list, there were white memory cards with kits for a Simmons set. These have the later (ugly) logo. Am I assuming correct that these was sold as add-ons to
Genesis / Phil Collins Simmons rack for sale !
2017-02-26 by troperecordings@...
Hi guys, just to leave everybody with big eyes I wanted to let you know that I m selling my Genesis / Phil Collins Simmons + more rack on Ebay ;-)
Favour? :)
2017-02-20 by jesper
Hi, I let this one pass since you stepped in so quickly. I hope you can solve the problem. Otherwise I ll need to put you under moderation. Good luck with the
Re: [Simmons Drums] Hello
2017-02-20 by Gwyn Clarke
lol, indeed. I apologise for the email, even though it wasn t sent by me - someone is spoofing my email address, it appears. Am attempting to get to the bottom
Re: [Simmons Drums] Hello
2017-02-20 by Nick Zampiello
lol NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S On Sunday, February 19, 2017 5:23 PM, WT
Re: [Simmons Drums] Hello
2017-02-19 by WT
No WT
Hello
2017-02-19 by Gwyn Clarke
Hi, Can i ask you for a quick Favour? Regards, Gwyn
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-11 by jesper
The sure look the same... http://medias.audiofanzine.com/images/normal/simmons-sds9-447560.jpg The grooves on the sides might differ a bit... Is the shaft 4mm
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-11 by jesper
The sure look the same... http://medias.audiofanzine.com/images/normal/simmons-sds9-447560.jpg The grooves on the sides might differ a bit... Is the shaft 4mm
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-11 by jesper
Hi Ewan, I dug out my knob spares... and realised I only have fresh green ones and a bunch of new K85 knobs. BUT, I do have a vintage Hill mixer in parts and
grey SDS caps
2017-02-04 by jesper
Hi, I m away for the weekend, but let me check upon arrival home on Monday and we ll sort something out. I might have knobs, but I m not sure. I know I bought
Re: SV: [Simmons Drums] Re: Q: SDS7 4 e-prom analog/digital card
2017-02-03 by Ewan Colsell
you can get proper isa prototype pcbs:
Re: SV: [Simmons Drums] Re: Q: SDS7 4 e-prom analog/digital card
2017-02-03 by hr.public@...
Moving this project slowly forward I ve might have found a way not to solder to my SDS7 before absolutely necessary. I ve ordered one of these 3$ ISA
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-03 by Ewan Colsell
jesper, I just need two grey caps, my sds9 isn t going to a museum anytime soon, so the colour match isn t that important. do you a have knob too? name you
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-03 by jesper
I have a couple of caps (green, blue, grey I think) from a set I bought on Ebay to restore a SDS-8. It depends on how picky one is with matching the colours.
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-02 by Ewan Colsell
google actually has quite a few results for cliff k85 octopart seems to have the knobs and caps. (not the grey ones though) after a proper check ir realised
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-02 by jesper
Knobs? I thought Ed Rose was the list s main supplier, or is that just for the caps? :) A store in my nearest town sells those knobs and caps. I bought for my
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-01 by Chris Wareham
The sales person at Cliff said their minimum order is 1,000 units - that would be a bout 700GBP for one order of knobs! Their suggestion was ordering via
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-01 by Jim Barber
Ask about the SDSV and SDS6 also. ... Ask about the SDSV and SDS6 also. On Feb 1, 2017, at 5:01 AM, jesper jesper@electronic-obsession.se [Simmons_Drums]
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-01 by Ewan Colsell
I need a few knobs for my sds9 too. One is missing completely and another two are missing their caps If you find a way to buy a small quantity let me know!
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-01 by Chris Wareham
Cool! I spoke to someone at Cliff and they suggested ordering the knobs and pots from Farnell. I m trying to track down the parts on Farnell s website, as they
Re: [Simmons Drums] Possible source of pots and knobs for Simmons SDS9 and others
2017-02-01 by jesper
Yes, Cliff are the maker of the knobs and have several coloured caps to choose from too. If you happen to own a EDP Wasp and a few other (often UK stuff, like