Yahoo Groups archive

Vintage Simmons Drums (UK) Users Group

Index last updated: 2026-04-13 23:32 UTC

Message

Re: [Simmons Drums] Re: Silicon Mallet suggestions

2010-07-03 by jesper

derrick simpson skrev:
> This is helpfull...if I can use a 1 rack space box to trigger the SDS
> V, that would be great. I wonder how SDSV sounds and the midi note
> numbers show up on the mallet?....maybe kick is low 'C' and snare and
> toms go up chromatically?.

The MTM and the midi2sds2 are assignable. I have all my drums mapped out 
in the lowest octave(s) on separate channel(s). So, in my case, as an 
example, I have the SDs-V mapped: kick, snare, tom1, tom2, tom3, cymbal, 
hihat. I'm also researching the possibility to midify the pedal input to 
close and open hihats.

-- 
electronically yours, jesper

- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.