This could be as well! I've made my own midimarimba, same probs berk >-- Oorspronkelijk bericht -- >To: Simmons_Drums@yahoogroups.com >From: Jacquot.Patrice@... >Date: Tue, 01 Jun 2010 09:37:31 +0200 >Subject: Re: [Simmons Drums] Problem with simultaneous trigger >Reply-To: Simmons_Drums@yahoogroups.com > > > >Hmmm... sounds like a polyphony problem no ? >it used to happen on VDrums ... you would play 2 or 3pads right in the smae >time & some sounds would disappear. A sort bad polyphony managment. > >Check if there isn't anything to assign or if it's the triggering module >architecture which is like this. > >It might not be that ...But it happens... > >good luck > > > > >Selon Myrios <myrios@...>: > >> I've got an older Simmons hexpad set (kick and all) setup on a Gibraltar >> stand connected to an Alesis DR4. It sounds great, but it appears that >my >> "high tom" pad won't trigger if played simultaneously with other pads (at >> least not with the kick). I tried a bit of swapping things around (pads, >> cables) and adjust the trigger sensitivy in the DR4 to no avail. Is this >a >> common problem? >> >> thanks, >> jeff >> >> > >
Message
Betr: Re: [Simmons Drums] Problem with simultaneous trigger
2010-06-01 by Berk Aarts
Attachments
- No local attachments were found for this message.