Vintage Simmons Drums (UK) Users Group

Well done ...
So what was the problem  ?





Selon ALFONSO PACHES <alfpaches@...>:

> Great
> the sds7 is working perfectly. Thanks
>
> --- El sáb, 13/3/10, Jacquot.Patrice@... <Jacquot.Patrice@...>
> escribió:
>
>
> De: Jacquot.Patrice@... <Jacquot.Patrice@...>
> Asunto: Re: [Simmons Drums] simmons sds7 triggering
> Para: Simmons_Drums@yahoogroups.com
> Fecha: sábado, 13 de marzo, 2010 15:35
>
>
>  
>
>
>
> Selon alfpaches <alfpaches@yahoo. es>:
>
> > Hi
> > I have problems to tigger my sds7. There is no problem with the analog
> sounds
> > but when I use the digital sounds they sound saturated. I set the
> sensitivity
> > pots very down but the response it´s the same. I´m triggering the sds7 by
> a
> > yamaha rx5 drum machine and when I push the pads the sound is good but when
> I
> > play a pattern or sequence from the drum machine the sound is saturated.
> > Could it be because an eprom fail?,or could it be for another reason?.
> Thanks
> >
> >
>
> If it's ok when you play from pads , your Eproms are ok.
> Jesper should be quite close to the problem...
>
> Inside the RX5 the velocity of the pads might be not set as loud as the
> sequencer dynamics...
> you could try first to check the output signal from the RX5 following your
> different triggering sources.
> or You have the solution of filtering the signal, through MTM or whatever...
>
> good luck...
>
> Patrice.
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>