Yahoo Groups archive

Vintage Simmons Drums (UK) Users Group

Index last updated: 2026-04-28 23:14 UTC

Message

Mixed results (was "You hear about this kind of thing...")

2009-08-08 by Aaron Thomas

Just had my first chance to try the SDS-800 I picked up at a French market the other week...

It's okay, but I don't think it's right.

The bass channel is the least satisfactory.  If I turn the overall level down to zero, it's fine.  Otherwise I get a constant "howling" sort of noise.  The volume of the howling is governed by the Click Level pot.  With this turned fully clockwise, the howling is loud - with this pot turned fully anti-clockwise, the howling is quiet but still there.

I can still trigger the bass channel despite the howling, but it doesn't sound anything like a bass - it sounds quite high pitched, more like a tom.

The snare seems reasonbly okay although doesn't sound a lot like the classic Simmons snare I was expecting.  I can't seem to get that sharp Kraftwerk-esque sound I want.  Sounds more like a tom sound with resonance. 

Tom 1 seems absolutely fine - and triggers the run generator nicely.

Tom 2 is a little strange.  The Decay pot doesn't seem to have any impact on the length of the sound being produced.  It's constantly a short sharp sound.  In fact this channel seems to produce sounds which sound far more like a kick drum than the bass channel does!

And finally the output I get from the Headphone socket is a little noisy, compared to the individual outs and the stereo / mix outs on the back of the box.

It's a bit of a shopping list of problems!  Bearing in mind I'm a complete newbie to this, and have never opened one of these machines up before - where would you suggest I start?

Fingers crossed you guys can help - and thank you in advance for all advice given.

Aaron

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.