Vintage Simmons Drums (UK) Users Group

I'll steer clear of slot 1.  Good advice.  Many thanks Darren

--- In Simmons_Drums@yahoogroups.com, "Darren Craven" <Darren@...> 
wrote:
>
> Hi There
> 
> The service manual for the SDSV mentions that you should not fit 
the cymbal or hi hat modules into the channel one position as the 
5volt regulator on the piggy back board could short out on the cheek 
of the chassis.
> 
> Regards
> --
> Darren
> 
> 
> 
> -----Original Message-----
> From: Simmons_Drums@yahoogroups.com on behalf of jesper
> Sent: Thu 22/01/2009 5:48 PM
> To: Simmons_Drums@yahoogroups.com
> Subject: Re: [Simmons Drums] SDSV Module Positions
>  
> monzarottie skrev:
> > 
> > 
> > 
> > Hi all. I just received my SDSV Cymbal and Hi Hat modules today 
(along
> > with a cymbal pad and Hi Hat pedal). Woohoo! [:D]
> > 
> > Does it matter which slot the Cymbal and Hi Hat modules populate? 
I
> > don't want to blow anything up.
> 
> Congrat's and welcome in the club! (though I miss pedal and pad)
> 
> No there's no need for a special slot as long as there is room for 
> everything. The proms might make the cards slightly thicker than 
usual.
> 
> I have my cards in slot 6 and 7...
> 
> -- 
> electronically yours, jesper
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
> www.myspace.com/machinepop
> - -- --- ---- ----- ---- --- -- -
> 
> "Spotify is fully legal and so should our content be too."
> 
> 
> 
> [Non-text portions of this message have been removed]
>