Vintage Simmons Drums (UK) Users Group

I beleive the center piezo has the center wired to the tip. The center of the rim pick-up to the ring and the two outer copper looking rings wire together to the gnd terminal (terminal nearest the entrance of the jack.) Hope this helps.
T

----- Original Message ----
From: ken_evans_99 <tycho33@...>
To: Simmons_Drums@yahoogroups.com
Sent: Monday, February 5, 2007 6:37:07 AM
Subject: [Simmons Drums] SDS9 Snare Wiring









  


    
            Can anyone tell me how the second piezo transducer in the SDS9 snare 

(the one mounted on the plastic frame) is meant to be wired to the 1/4" 

jack? The kit I'm restoring has no wiring attached to this transducer, 

only to the main one on the floating plywood head. The shell was glued 

in with silicone sealant, it's obviously been "repaired" at some 

stage....



Simple wiring instructions for a retarded monkey with soldering skills 

would be appreciated :-)



Thanks,

Ken.





    
  

    
    




<!--