Vintage Simmons Drums (UK) Users Group

Hai
Is it not better to do the trick with 2 battery's????
use one to a kind of backup just solder it to the board, then replace,
then desolder the other one
I once had to replace a battery in a korg S3 and I did not do it like
this, and now he doesn't do a thing anymore, I kind of lost the ROM 


Good luck 
Berk !

ps Nice piece a sds7


--- In Simmons_Drums@...m, <michael.buchner@...> wrote:
>
> If your SDS7 is working fine, you are a lucky man ;-). There is only
1 battery to change. Open the case on the right side by removing the
right front panel (the one with the incrementor, buttons and display).
It is only 4 screws. Now pull out the very right board, containing the
rom, ram and- the battery. Pray, that the battery has had no leakage
and your board is still ok. Replace with NiCd, not Mh, Voltage is 3,6V.
> Michael 
> 
> 
> [Non-text portions of this message have been removed]
>