SergeModular

> > As I don't have the Gold book, can anyone tell me how the
> > SSG is patched to be an RVG.

> hi Steve ,
> From memory ,
> basically , if you use the Stepped portion of the module , put
> in noise/or some very complex signal into the input , patch a
> clock/oscillator to the trigger in , or patch the cycle jack into the
> trigger in for self clocking set by the rate control . . the sampled
> (random if full freq. noise is used) voltage then emerges from the
> stepped out. You can of course derive all sorts of probabalistic
> patterns from differant sample sources other than noise , in the
> audio or cv range.
>
> hope this is helpfull . good luck
> P.K.

I'll go look at some panels for a while.

Do you know which of the NOIse source outputs is used by the
RVG?

Thanks

Steve Ridley

Patching SSG to be an RVG, from Gold book:

Noise S/H output to Stepped In
Coupler output to Stepped Sample and Smooth In

Smooth out is Smooth
Stepped out is Stepped
Coupler out is Pulse

John Loffink
microtonal@...

> Patching SSG to be an RVG, from Gold book:
>
> Noise S/H output to Stepped In
> Coupler output to Stepped Sample and Smooth In
>
> Smooth out is Smooth
> Stepped out is Stepped
> Coupler out is Pulse

Excellent, thanks. I'll go and think about what's going on.


Steve Ridley

(too tired o think Serge tonight)