> > As I don't have the Gold book, can anyone tell me how theI'll go look at some panels for a while.
> > SSG is patched to be an RVG.
> hi Steve ,
> From memory ,
> basically , if you use the Stepped portion of the module , put
> in noise/or some very complex signal into the input , patch a
> clock/oscillator to the trigger in , or patch the cycle jack into the
> trigger in for self clocking set by the rate control . . the sampled
> (random if full freq. noise is used) voltage then emerges from the
> stepped out. You can of course derive all sorts of probabalistic
> patterns from differant sample sources other than noise , in the
> audio or cv range.
>
> hope this is helpfull . good luck
> P.K.
Do you know which of the NOIse source outputs is used by the
RVG?
Thanks
Steve Ridley