SergeModular

Patching SSG to be an RVG, from Gold book:

Noise S/H output to Stepped In
Coupler output to Stepped Sample and Smooth In

Smooth out is Smooth
Stepped out is Stepped
Coupler out is Pulse

John Loffink
microtonal@...

> > > As I don't have the Gold book, can anyone tell me how the
> > > SSG is patched to be an RVG.
>
> > hi Steve ,
> > From memory ,
> > basically , if you use the Stepped portion of the module , put
> > in noise/or some very complex signal into the input , patch a
> > clock/oscillator to the trigger in , or patch the cycle jack into the
> > trigger in for self clocking set by the rate control . . the sampled
> > (random if full freq. noise is used) voltage then emerges from the
> > stepped out. You can of course derive all sorts of probabalistic
> > patterns from differant sample sources other than noise , in the
> > audio or cv range.
> >
> > hope this is helpfull . good luck
> > P.K.
>
> I'll go look at some panels for a while.
>
> Do you know which of the NOIse source outputs is used by the
> RVG?
>