i received my set of mini to banana cables from Rex on friday and spent the morning
interfacing my creature with my euro rack without a hitch. In fact the serge creature is a
welcome addition to my euro set up. Highly Recommended! as James mentioned, only
thing is to make sure you have a common ground. Rex can set you up with this if you ask.
interfacing my creature with my euro rack without a hitch. In fact the serge creature is a
welcome addition to my euro set up. Highly Recommended! as James mentioned, only
thing is to make sure you have a common ground. Rex can set you up with this if you ask.
--- In SergeModular@yahoogroups.com, Carbon111 <carbon111@...> wrote:
>
> >I am intersted in receiving any information group memebers have regard
> >to success interfacing Serge equipment with that of OTHER
> >MANUFACTURERS. I am most concerned with Serge's 5 volt peak to peak
> >standard and, of course, bananna plugs.
>
> I had no problems whatsoever using my Serge with Dotcom modules (back when I still
had a Dotcom system) and currently have no issues using my Serge CV and audio with
various Moog pieces - moogerfoogers, Little Phatty. When I used it with Dotcom stuff, I
had some Dotcom 1/4"-to-bananna panels. I also have some 1/4"-to-bananna cables that
work just fine.
>
> The only critical thing is to have a _common_ground_. Ground your Serge PS to your
MIDI/CV converter or other voltage source, otherwise you won't get proper triggers/gates.
>
> Serge responds just fine to the usual 1v/oct generated by sequencers and MIDI/cv
converters without any problems at all.
>
> Best Regards, James
> --
> http://www.carbon111.com/serge_index.html
>