Welcome and congrats!
Try this. Patch TKB row B, for example, to the VC IN of the TKB clock source (DTG, DSG, or VC CLOCK, etc.), turn that input's processing knob full clockwise and set to BOTH, if available. Turn the knob for the step you want to skip to full clockwise.
Maybe there's a different or better way... I'll let you know if I find more.
Matt
Try this. Patch TKB row B, for example, to the VC IN of the TKB clock source (DTG, DSG, or VC CLOCK, etc.), turn that input's processing knob full clockwise and set to BOTH, if available. Turn the knob for the step you want to skip to full clockwise.
Maybe there's a different or better way... I'll let you know if I find more.
Matt
On 7/13/08, Kylee Kennedy <kmkennedy@...> wrote:There is probably something obvious but I've gotten about 3 days into my new Serge and I can't figure out the best way to have the sequencer skip steps or not send a signal on a step. What do I need to patch? This is a 78/79 make TKB.
Also row B is dead on mine and seems to give out a 10+ Volt signal..Does this issue sound familiar to anyone? At some point this will go in for a full service and complete banana plug replacement but I'm having to much fun with it.
The Serge Newbie,
Kylee Kennedy