Ah, nice combination. I used an 808 in conjunction with my Serge when I had it.
Be careful, though, the trigger outputs of the 808 are very hot, i.e., 15v. The rails on the Serge PS are +-12v so I'm not sure what effect a 15v trigger will have.
Here's the 808 service manual where I found this info:
http://www.matrixsynth.com/blog/media/roland/TR-808%20Service%20Manual/
Matt
Be careful, though, the trigger outputs of the 808 are very hot, i.e., 15v. The rails on the Serge PS are +-12v so I'm not sure what effect a 15v trigger will have.
Here's the 808 service manual where I found this info:
http://www.matrixsynth.com/blog/media/roland/TR-808%20Service%20Manual/
Matt
On 7/13/08, Kylee Kennedy <kmkennedy@...> wrote:Thanks for the warm welcome. I will give those suggestions a try. I was previously stepping the TKB with my TR-808. Syncing it up and also processing a few hits with the DSG. Really wild stuff and tightly synced. It worked right off the bat.
Following up with my issues, Does anyone know a good Serge repair technician in the LA area?
Think I'm going to like this group,
Kylee Kennedy