Modular Synth Panels

Did I read the bridechamber news section correctly? The DDVCO panels are in?

YAY YAY YAY!!!!!

I can hardly contain myself I am sooooooooooooooooo excited!

-Jim

They are "in" : )
I'm just waiting on the proper screws for mounting the slider board,
and then testing and shipping... next week?????

I'm very excited too -- a lot of work (especially for Ian!) and money
to get this all happ'nin', but it will be well worth it.

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Jan 10, 2009, at 6:05 PM, James Elliott wrote:

> Did I read the bridechamber news section correctly? The DDVCO panels
> are in?
>
> YAY YAY YAY!!!!!
>
> I can hardly contain myself I am sooooooooooooooooo excited!
>
> -Jim
>
>
>

Hey Scott,

Have these started shipping yet?

Dave

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> They are "in" : )
> I'm just waiting on the proper screws for mounting the slider board,
> and then testing and shipping... next week?????
>
> I'm very excited too -- a lot of work (especially for Ian!) and money
> to get this all happ'nin', but it will be well worth it.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
>
> > Did I read the bridechamber news section correctly? The DDVCO panels
> > are in?
> >
> > YAY YAY YAY!!!!!
> >
> > I can hardly contain myself I am sooooooooooooooooo excited!
> >
> > -Jim
> >
> >
> >
>

Very soon... I'm out of screws for mounting the sliders.
Oddly, M2 5mm black screws are hard to find at a good price.
: (

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Jan 28, 2009, at 4:31 PM, Dave wrote:

> Hey Scott,
>
> Have these started shipping yet?
>
> Dave
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > They are "in" : )
> > I'm just waiting on the proper screws for mounting the slider board,
> > and then testing and shipping... next week?????
> >
> > I'm very excited too -- a lot of work (especially for Ian!) and
> money
> > to get this all happ'nin', but it will be well worth it.
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
> >
> > > Did I read the bridechamber news section correctly? The DDVCO
> panels
> > > are in?
> > >
> > > YAY YAY YAY!!!!!
> > >
> > > I can hardly contain myself I am sooooooooooooooooo excited!
> > >
> > > -Jim
> > >
> > >
> > >
> >
>
>
>

From: ModularSynthPanels@yahoogroups.com [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
Sent: Wednesday, January 28, 2009 7:06 PM
To: ModularSynthPanels@yahoogroups.com
Subject: Re: [ModularSynthPanels] Re: DDVCO

Very soon... I'm out of screws for mounting the sliders.
Oddly, M2 5mm black screws are hard to find at a good price.
: (

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com


On Jan 28, 2009, at 4:31 PM, Dave wrote:

Hey Scott,

Have these started shipping yet?

Dave

--- In ModularSynthPanels@yahoogroups.com , Scott Deyo <contact@...> wrote:
>
> They are "in" : )
> I'm just waiting on the proper screws for mounting the slider board,
> and then testing and shipping... next week?????
>
> I'm very excited too -- a lot of work (especially for Ian!) and money
> to get this all happ'nin', but it will be well worth it.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridecha mber.com
> Jealous Edison Record Kompany
> http://www.jealouse dison.com
>
>
> On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
>
> > Did I read the bridechamber news section correctly? The DDVCO panels
> > are in?
> >
> > YAY YAY YAY!!!!!
> >
> > I can hardly contain myself I am sooooooooooooooooo excited!
> >
> > -Jim
> >
> >
> >
>

Thanks, Dave.
Yes, for some reason $.13 each is the best I can find @1000.
It's OEM Hardware or something like that.

So it goes : )

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Jan 28, 2009, at 11:34 PM, Dave Halliday wrote:

> I was going to ask if you tried Fastenal but they only have zinc
> finishes...
>  
> Grainger does have some nice cap-head screws but being Grainger, you
> are not looking at the "good price" aspect.
>  
> Fastenal generally charges a couple bucks for 100 small machine
> screws. Grainger is asking $14.37 for item 6CE31 which is 100 of the
> following description:
>  
> Socket Head Cap Screw, 12.9 Alloy Steel, Furnace Black Finish, Hex
> Socket, Thread Size M2X0.40mm, Drive Size 1.5mm, Decimal Equivalent
> 0.079 In, Thread Type Metric, Fully Threaded, Right Hand Thread
> Direction, Length Under Head 6mm, Head Height 2mm, Head Dia 3.8mm,
> Thread Class 5g6g, Rockwell Hardness C39-C44, Min Tensile Strength
> 176,900 PSI, Meets DIN 912/ISO 4762, Package 100
>  
> Good luck!
> Dave
>
>> From: ModularSynthPanels@yahoogroups.com
>> [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
>> Sent: Wednesday, January 28, 2009 7:06 PM
>> To: ModularSynthPanels@yahoogroups.com
>> Subject: Re: [ModularSynthPanels] Re: DDVCO
>>
>> Very soon... I'm out of screws for mounting the sliders.
>> Oddly, M2 5mm black screws are hard to find at a good price.
>> : (
>>
>> Scott Deyo
>> The Bridechamber
>> contact@...
>> http://www.bridechamber.com
>> Jealous Edison Record Kompany
>> http://www.jealousedison.com
>>
>>
>> On Jan 28, 2009, at 4:31 PM, Dave wrote:
>>
>>> Hey Scott,
>>>
>>> Have these started shipping yet?
>>>
>>> Dave
>>>
>>> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
>>> wrote:
>>> >
>>> > They are "in" : )
>>> > I'm just waiting on the proper screws for mounting the slider
>>> board,
>>> > and then testing and shipping... next week?????
>>> >
>>> > I'm very excited too -- a lot of work (especially for Ian!) and
>>> money
>>> > to get this all happ'nin', but it will be well worth it.
>>> >
>>> > Cheers,
>>> > Scott Deyo
>>> > The Bridechamber
>>> > contact@...
>>> > http://www.bridechamber.com
>>> > Jealous Edison Record Kompany
>>> > http://www.jealousedison.com
>>> >
>>> >
>>> > On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
>>> >
>>> > > Did I read the bridechamber news section correctly? The DDVCO
>>> panels
>>> > > are in?
>>> > >
>>> > > YAY YAY YAY!!!!!
>>> > >
>>> > > I can hardly contain myself I am sooooooooooooooooo excited!
>>> > >
>>> > > -Jim
>>> > >
>>> > >
>>> > >
>>> >
>>>
>
>

From: ModularSynthPanels@yahoogroups.com [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
Sent: Thursday, January 29, 2009 5:49 AM
To: ModularSynthPanels@yahoogroups.com
Subject: Re: [ModularSynthPanels] Re: DDVCO

Thanks, Dave.
Yes, for some reason $.13 each is the best I can find @1000.
It's OEM Hardware or something like that.

So it goes : )

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com


On Jan 28, 2009, at 11:34 PM, Dave Halliday wrote:

I was going to ask if you tried Fastenal but they only have zinc finishes...
 
Grainger does have some nice cap-head screws but being Grainger, you are not looking at the "good price" aspect.
 
Fastenal generally charges a couple bucks for 100 small machine screws. Grainger is asking $14.37 for item 6CE31 which is 100 of the following description:
 
Socket Head Cap Screw, 12.9 Alloy Steel, Furnace Black Finish, Hex Socket, Thread Size M2X0.40mm, Drive Size 1.5mm, Decimal Equivalent 0.079 In, Thread Type Metric, Fully Threaded, Right Hand Thread Direction, Length Under Head 6mm, Head Height 2mm, Head Dia 3.8mm, Thread Class 5g6g, Rockwell Hardness C39-C44, Min Tensile Strength 176,900 PSI, Meets DIN 912/ISO 4762, Package 100
 
Good luck!
Dave

From: ModularSynthPanels@yahoogroups.com [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
Sent: Wednesday, January 28, 2009 7:06 PM
To: ModularSynthPanels@yahoogroups.com
Subject: Re: [ModularSynthPanels] Re: DDVCO

Very soon... I'm out of screws for mounting the sliders.
Oddly, M2 5mm black screws are hard to find at a good price.
: (

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com


On Jan 28, 2009, at 4:31 PM, Dave wrote:

Hey Scott,

Have these started shipping yet?

Dave

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> They are "in" : )
> I'm just waiting on the proper screws for mounting the slider board,
> and then testing and shipping... next week?????
>
> I'm very excited too -- a lot of work (especially for Ian!) and money
> to get this all happ'nin', but it will be well worth it.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
>
> > Did I read the bridechamber news section correctly? The DDVCO panels
> > are in?
> >
> > YAY YAY YAY!!!!!
> >
> > I can hardly contain myself I am sooooooooooooooooo excited!
> >
> > -Jim
> >
> >
> >
>

Any luck with the screws?



----- Original Message ----
From: Scott Deyo <contact@...>
To: ModularSynthPanels@yahoogroups.com
Sent: Thursday, January 29, 2009 7:49:10 AM
Subject: Re: [ModularSynthPanels] Re: DDVCO

Thanks, Dave.
Yes, for some reason $.13 each is the best I can find @1000.
It's OEM Hardware or something like that.

So it goes : )

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Jan 28, 2009, at 11:34 PM, Dave Halliday wrote:

> I was going to ask if you tried Fastenal but they only have zinc finishes...
>
> Grainger does have some nice cap-head screws but being Grainger, you are not looking at the "good price" aspect.
>
> Fastenal generally charges a couple bucks for 100 small machine screws. Grainger is asking $14.37 for item 6CE31 which is 100 of the following description:
>
> Socket Head Cap Screw, 12.9 Alloy Steel, Furnace Black Finish, Hex Socket, Thread Size M2X0.40mm, Drive Size 1.5mm, Decimal Equivalent 0.079 In, Thread Type Metric, Fully Threaded, Right Hand Thread Direction, Length Under Head 6mm, Head Height 2mm, Head Dia 3.8mm, Thread Class 5g6g, Rockwell Hardness C39-C44, Min Tensile Strength 176,900 PSI, Meets DIN 912/ISO 4762, Package 100
>
> Good luck!
> Dave
>
>> From: ModularSynthPanels@yahoogroups.com [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
>> Sent: Wednesday, January 28, 2009 7:06 PM
>> To: ModularSynthPanels@yahoogroups.com
>> Subject: Re: [ModularSynthPanels] Re: DDVCO
>>
>> Very soon... I'm out of screws for mounting the sliders.
>> Oddly, M2 5mm black screws are hard to find at a good price.
>> : (
>>
>> Scott Deyo
>> The Bridechamber
>> contact@...
>> http://www.bridechamber.com
>> Jealous Edison Record Kompany
>> http://www.jealousedison.com
>>
>>
>> On Jan 28, 2009, at 4:31 PM, Dave wrote:
>>
>>> Hey Scott,
>>>
>>> Have these started shipping yet?
>>>
>>> Dave
>>>
>>> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>>> >
>>> > They are "in" : )
>>> > I'm just waiting on the proper screws for mounting the slider board,
>>> > and then testing and shipping... next week?????
>>> >
>>> > I'm very excited too -- a lot of work (especially for Ian!) and money
>>> > to get this all happ'nin', but it will be well worth it.
>>> >
>>> > Cheers,
>>> > Scott Deyo
>>> > The Bridechamber
>>> > contact@...
>>> > http://www.bridechamber.com
>>> > Jealous Edison Record Kompany
>>> > http://www.jealousedison.com
>>> >
>>> >
>>> > On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
>>> >
>>> > > Did I read the bridechamber news section correctly? The DDVCO panels
>>> > > are in?
>>> > >
>>> > > YAY YAY YAY!!!!!
>>> > >
>>> > > I can hardly contain myself I am sooooooooooooooooo excited!
>>> > >
>>> > > -Jim
>>> > >
>>> > >
>>> > >
>>> >
>>>
>

It's been a while since the last update, any news?

-Jim



----- Original Message ----
From: Scott Deyo <contact@...>
To: ModularSynthPanels@yahoogroups.com
Sent: Thursday, January 29, 2009 7:49:10 AM
Subject: Re: [ModularSynthPanels] Re: DDVCO

Thanks, Dave.
Yes, for some reason $.13 each is the best I can find @1000.
It's OEM Hardware or something like that.

So it goes : )

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Jan 28, 2009, at 11:34 PM, Dave Halliday wrote:

> I was going to ask if you tried Fastenal but they only have zinc finishes...
>
> Grainger does have some nice cap-head screws but being Grainger, you are not looking at the "good price" aspect.
>
> Fastenal generally charges a couple bucks for 100 small machine screws. Grainger is asking $14.37 for item 6CE31 which is 100 of the following description:
>
> Socket Head Cap Screw, 12.9 Alloy Steel, Furnace Black Finish, Hex Socket, Thread Size M2X0.40mm, Drive Size 1.5mm, Decimal Equivalent 0.079 In, Thread Type Metric, Fully Threaded, Right Hand Thread Direction, Length Under Head 6mm, Head Height 2mm, Head Dia 3.8mm, Thread Class 5g6g, Rockwell Hardness C39-C44, Min Tensile Strength 176,900 PSI, Meets DIN 912/ISO 4762, Package 100
>
> Good luck!
> Dave
>
>> From: ModularSynthPanels@yahoogroups.com [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
>> Sent: Wednesday, January 28, 2009 7:06 PM
>> To: ModularSynthPanels@yahoogroups.com
>> Subject: Re: [ModularSynthPanels] Re: DDVCO
>>
>> Very soon... I'm out of screws for mounting the sliders.
>> Oddly, M2 5mm black screws are hard to find at a good price.
>> : (
>>
>> Scott Deyo
>> The Bridechamber
>> contact@...
>> http://www.bridechamber.com
>> Jealous Edison Record Kompany
>> http://www.jealousedison.com
>>
>>
>> On Jan 28, 2009, at 4:31 PM, Dave wrote:
>>
>>> Hey Scott,
>>>
>>> Have these started shipping yet?
>>>
>>> Dave
>>>
>>> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>>> >
>>> > They are "in" : )
>>> > I'm just waiting on the proper screws for mounting the slider board,
>>> > and then testing and shipping... next week?????
>>> >
>>> > I'm very excited too -- a lot of work (especially for Ian!) and money
>>> > to get this all happ'nin', but it will be well worth it.
>>> >
>>> > Cheers,
>>> > Scott Deyo
>>> > The Bridechamber
>>> > contact@...
>>> > http://www.bridechamber.com
>>> > Jealous Edison Record Kompany
>>> > http://www.jealousedison.com
>>> >
>>> >
>>> > On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
>>> >
>>> > > Did I read the bridechamber news section correctly? The DDVCO panels
>>> > > are in?
>>> > >
>>> > > YAY YAY YAY!!!!!
>>> > >
>>> > > I can hardly contain myself I am sooooooooooooooooo excited!
>>> > >
>>> > > -Jim
>>> > >
>>> > >
>>> > >
>>> >
>>>
>

Still waiting on the $#%#$%#$ screws. They should be here next week.
I'm frustrated, too. I have a ton of kits ready to ship, taking up
sparse room, waiting on something as banal as screws...
: (

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Mar 12, 2009, at 6:57 PM, James Elliott wrote:

>
> It's been a while since the last update, any news?
>
> -Jim
>
> ----- Original Message ----
> From: Scott Deyo <contact@...>
> To: ModularSynthPanels@yahoogroups.com
> Sent: Thursday, January 29, 2009 7:49:10 AM
> Subject: Re: [ModularSynthPanels] Re: DDVCO
>
> Thanks, Dave.
> Yes, for some reason $.13 each is the best I can find @1000.
> It's OEM Hardware or something like that.
>
> So it goes : )
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
> On Jan 28, 2009, at 11:34 PM, Dave Halliday wrote:
>
> > I was going to ask if you tried Fastenal but they only have zinc
> finishes...
> >
> > Grainger does have some nice cap-head screws but being Grainger,
> you are not looking at the "good price" aspect.
> >
> > Fastenal generally charges a couple bucks for 100 small machine
> screws. Grainger is asking $14.37 for item 6CE31 which is 100 of the
> following description:
> >
> > Socket Head Cap Screw, 12.9 Alloy Steel, Furnace Black Finish, Hex
> Socket, Thread Size M2X0.40mm, Drive Size 1.5mm, Decimal Equivalent
> 0.079 In, Thread Type Metric, Fully Threaded, Right Hand Thread
> Direction, Length Under Head 6mm, Head Height 2mm, Head Dia 3.8mm,
> Thread Class 5g6g, Rockwell Hardness C39-C44, Min Tensile Strength
> 176,900 PSI, Meets DIN 912/ISO 4762, Package 100
> >
> > Good luck!
> > Dave
> >
> >> From: ModularSynthPanels@yahoogroups.com
> [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Scott Deyo
> >> Sent: Wednesday, January 28, 2009 7:06 PM
> >> To: ModularSynthPanels@yahoogroups.com
> >> Subject: Re: [ModularSynthPanels] Re: DDVCO
> >>
> >> Very soon... I'm out of screws for mounting the sliders.
> >> Oddly, M2 5mm black screws are hard to find at a good price.
> >> : (
> >>
> >> Scott Deyo
> >> The Bridechamber
> >> contact@...
> >> http://www.bridechamber.com
> >> Jealous Edison Record Kompany
> >> http://www.jealousedison.com
> >>
> >>
> >> On Jan 28, 2009, at 4:31 PM, Dave wrote:
> >>
> >>> Hey Scott,
> >>>
> >>> Have these started shipping yet?
> >>>
> >>> Dave
> >>>
> >>> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> <contact@...> wrote:
> >>> >
> >>> > They are "in" : )
> >>> > I'm just waiting on the proper screws for mounting the slider
> board,
> >>> > and then testing and shipping... next week?????
> >>> >
> >>> > I'm very excited too -- a lot of work (especially for Ian!) and
> money
> >>> > to get this all happ'nin', but it will be well worth it.
> >>> >
> >>> > Cheers,
> >>> > Scott Deyo
> >>> > The Bridechamber
> >>> > contact@...
> >>> > http://www.bridechamber.com
> >>> > Jealous Edison Record Kompany
> >>> > http://www.jealousedison.com
> >>> >
> >>> >
> >>> > On Jan 10, 2009, at 6:05 PM, James Elliott wrote:
> >>> >
> >>> > > Did I read the bridechamber news section correctly? The DDVCO
> panels
> >>> > > are in?
> >>> > >
> >>> > > YAY YAY YAY!!!!!
> >>> > >
> >>> > > I can hardly contain myself I am sooooooooooooooooo excited!
> >>> > >
> >>> > > -Jim
> >>> > >
> >>> > >
> >>> > >
> >>> >
> >>>
> >
>
>