Modular Synth Panels

I did copy your format Richard!

Thanks for your suggestions guys, I will change the engraving tool and play around with 
the location of the fonts.

However, why do you suggest I make it into 1U? You feel it's better to have this panel 
dedicated to the pro2000 and have more Mults on another panel? 

I was thinking that in some cases having it all in one panel is convenient... maybe I'll 
reconsider... 

Ithai




--- In ModularSynthPanels@yahoogroups.com, Richard Brewster <pugix@...> wrote:
>
> Looks like you copied my format!  It's a perfect match with my grid.  If 
> you want, you can put the labels underneath the jacks instead of above 
> (0.4 inches below center).  There's enough room at the bottom.  You have 
> 0.05 inches more space there than at the top.  I also suggest using the 
> 0.2mm engraving tool.
> 
> -Richard
> 
> ithaib wrote:
> > Hi all,
> >
> > I just designed a MOTM breakout panel for my Kenton Pro-2000.
> >
> > I uploaded the file to the file section. It's called:
> >
> > motm_kenton_pro2000.fpd
> >
> > It's the first time I'm using FPE. Before I go ahead and order it, can
> > someone take a look at it and see if I chose all the right things
> > (fonts, size, etc...). One thing I'm wondering is if the "CV1" in the
> > left corner won't be covered by the screw.
> >
> > I'd really appreciate any input...
> > Thanks in advance!
> >
> > Ithai B.
> >
> >
> >
> >  
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>