Hi all,
I just designed a MOTM breakout panel for my Kenton Pro-2000.
I uploaded the file to the file section. It's called:
motm_kenton_pro2000.fpd
It's the first time I'm using FPE. Before I go ahead and order it, can
someone take a look at it and see if I chose all the right things
(fonts, size, etc...). One thing I'm wondering is if the "CV1" in the
left corner won't be covered by the screw.
I'd really appreciate any input...
Thanks in advance!
Ithai B.
I just designed a MOTM breakout panel for my Kenton Pro-2000.
I uploaded the file to the file section. It's called:
motm_kenton_pro2000.fpd
It's the first time I'm using FPE. Before I go ahead and order it, can
someone take a look at it and see if I chose all the right things
(fonts, size, etc...). One thing I'm wondering is if the "CV1" in the
left corner won't be covered by the screw.
I'd really appreciate any input...
Thanks in advance!
Ithai B.