Modular Synth Panels group photo

Yahoo Groups archive

Modular Synth Panels

Index last updated: 2026-04-28 23:10 UTC

Message

Another take on small pots in MOTM format

2009-12-20 by Andrew Listmayer

Welcome to the dark side of the MOTM force. I dub thee Darth Pugix. I would Imagine that the 3/4" alco knobs would be mighty tight squeeze on that grid, though. I moved down to 1/2" knobs and they are able to fit on a slightly tighter 7/8 x 7/8 grid with tick marks. I've also been experimenting with different jack placements so I can squeeze them closer toghether as seen on my 2U doomsday machine with 20 jacks and 18 pots.

http://www.tellun.com/motm/diy/tln712/ALpanel.jpg

Unlike you, I have an LED fetish, but also have a rule that they can't take up any space where a pot or jack could go and I've managed to squeeze in a couple hundred across the face of my 24x25u synth.

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.