Modular Synth Panels

i'll have a bridechamber panel...

>Well  I will need one, put me down for it.
>
>Question :
>
>Should I finish the Bananalogue or sell it along and get a CGS board instead ?
>
>OR keep both.
>
>best
>
>gino
>
>
>
>--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>>
>>  I am. I have the layout done and will upload it this weekend, I hope.
>>  IIRC it has 10 jacks, 7 pots, 3 switches.
>>
>>  Scott Deyo
>>  contact@...
>>  The Bridechamber
>>  www.bridechamber.com
>>  Jealous Edison Record Kompany
>>  www.jealousedison.com
>>
>>
>>
>>
>>  On Oct 3, 2009, at 8:33 AM, Richard Brewster wrote:
>>
>>  > Is Bridechamber doing a MOTM panel for this?
>>  >
>>  > Richard Brewster
>>  > http://pugix.com
>>  >
>>  > Ross Stapf wrote:
>>  > >
>>  > >
>>  > > I've built one. I have another half finished. The only problem is
>>  > > the led's.
>>  > > http://www.electro-music.com/forum/topic-26503-25.html Look at this
>>  > > thread, page 2 about half way down is when the MOTM version is
>>  > > discussed. There is a part list for the euro version on page 1 
>>  > that I
>>  > > used and it was right for the most part.
>>  > >
>>  > > It is well labeled and was pretty easy to build. Again see the
>>  > > instructions Andrew F posted to fix this. Other folks mention a
>>  > > problem with the euro boards. I did not have this issue. The only
>>  > > problem I had was with the LED's and the fix Andrew F gave works 
>>  > just
>>  > > fine.
>>  > >
>>  > > This was the first project I did without step by step 
>>  > instructions. I
>>  > > had been doing diy for less than a year when I finished it. I used
>>  > > Sduck's panel layout.
>>  > >
>>  > > Ross
>>  > >
>>  > >
>>  >
>>  >
>>  >
>>
>
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>