Modular Synth Panels

Well  I will need one, put me down for it.

Question :

Should I finish the Bananalogue or sell it along and get a CGS board instead ?

OR keep both.

best

gino



--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I am. I have the layout done and will upload it this weekend, I hope.
> IIRC it has 10 jacks, 7 pots, 3 switches.
> 
> Scott Deyo
> contact@...
> The Bridechamber
> www.bridechamber.com
> Jealous Edison Record Kompany
> www.jealousedison.com
> 
> 
> 
> 
> On Oct 3, 2009, at 8:33 AM, Richard Brewster wrote:
> 
> > Is Bridechamber doing a MOTM panel for this?
> >
> > Richard Brewster
> > http://pugix.com
> >
> > Ross Stapf wrote:
> > >
> > >
> > > I've built one. I have another half finished. The only problem is
> > > the led's.
> > > http://www.electro-music.com/forum/topic-26503-25.html Look at this
> > > thread, page 2 about half way down is when the MOTM version is
> > > discussed. There is a part list for the euro version on page 1  
> > that I
> > > used and it was right for the most part.
> > >
> > > It is well labeled and was pretty easy to build. Again see the
> > > instructions Andrew F posted to fix this. Other folks mention a
> > > problem with the euro boards. I did not have this issue. The only
> > > problem I had was with the LED's and the fix Andrew F gave works  
> > just
> > > fine.
> > >
> > > This was the first project I did without step by step  
> > instructions. I
> > > had been doing diy for less than a year when I finished it. I used
> > > Sduck's panel layout.
> > >
> > > Ross
> > >
> > >
> >
> >
> >
>