Modular Synth Panels

I like your idea. That's what I'll do on mine, I think. I think I'll 
keep all legending non-mod, though, as I've found that most people 
don't do mods.

Super-Klee? Wow, and I thought this one was confusing enough! : )

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com


On Mar 19, 2009, at 11:23 AM, Scott Juskiw wrote:

> Is the CLOCK THRU jack simply connected to the CLOCK IN jack? If so,
>  this jack could instead be used as an output for shift register B
>  (after the INVERT switch), call it SRB OUT. This would allow cascading
>  the output from one Klee to the input of another Klee (connect KIee #1
>  SRB OUT to Klee #2 RANDOM INPUT) to achieve 32 step sequences. Does
>  anybody else think this is a good idea? If you are worried about
>  connecting a CMOS output to a jack, there is an unused op-amp that
>  could be used as a buffer.
>
>  Even if you don't change the legend on the panel, I will likely wire
>  mine up this way. I came up with a dozen Klee modifications, but
>  implementing them all would require a ridiculous amount of hardware
>  changes (I would have to make all new PCBs) and a panel 3 times the
>  size of the one you've got. I think I'll stick with the official Klee
>  for now.
>
>  >
>  > Yeah, that's just the CAD I send to the metal guys (dimensions on
>  > another layer), so green is .25" and tiger print is .375". Doesn't
>  > really help, huh?
>  > The Ext Load, Range and Random Input have associated switches (LED
>  > for Random Input, I think). I figured that legending is more obvious
>  > than the on/off legending. I'm thinking the switched would be left/
>  > right, or _towards_ the jack if you want that jack enabled. Is that
>  > OK w/ everyone? I can add on/ off if you want. I still haven't
>  > decided whether to do MOTM boxes for the standalone switches or not.
>  > I think not in this case, as it would make a graphic mess of it.
>  >
>