Modular Synth Panels

A panel is in the works, but not yet made.

If you scroll down on this page, you can see a couple ideas from us:
http://www.dragonflyalley.com/billAndWillMOTMSynth.htm

On the above page, the left thumbnail represents a panel for the
Krautrock as Jurgen designed the circuit.  Jurgen helped by reviewing
this design and we've incorporated his suggetions.

The right thumbnail is a fantasy at this point - it's an "if only we
could add a daughterboard so CVs could be used" version.  And my son,
Will, put the little skull and crossbones on there <G>.

As designed, there are no CV inputs to the unit.  The three jacks
BYPASS, RATE, and DEPTH are for switch and expression pedals.  I
believe I recall that Jurgen warned us that applying a CV here could
be damaging to the unit - hence our little warning on the panel. 
There's a momentary switch for the effect bypass.  If you were making
this into a stomp-box these things would be particularly handy.

I think the reason progress on this stalled a bit is that some of the
parts have been hard to get west of the Atlantic.  And one of those
parts is the E10 panel-mount socket with the groovy, retro lens.  I
found these parts at various over-seas suppliers and there was talk of
a group-buy.  But Jurgen recently partnered with a fellow who, I
think, can help us get the parts - but I haven't had time lately to
explore further.

Anyway, I'll turn my attention back to this.  Hopefully Scott can get
it in on one of his next runs.

Bill




--- In ModularSynthPanels@yahoogroups.com, Nathan Wooster
<woostern@...> wrote:
>
> Has anybody made a MOTM panel for the Compact Clone?  Will
Bridechamber do this?
> 
> thanks,
> Nathan
>